HBT 2015 Big Giveaway - Enter Now

Huge Supporting Membership Discounts - 20% Off

Home Brew Forums > Home Brewing Beer > Electric Brewing > Houston...we almost had a big problem
Reply
 
LinkBack Thread Tools
Old 11-18-2012, 02:36 AM   #11
passedpawn
Waste Allocation Load Lifter - Earth Class
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
passedpawn's Avatar
Recipes 
 
Join Date: Apr 2009
Location: ☼ Clearwater, FL ☼
Posts: 20,783
Liked 4123 Times on 2527 Posts
Likes Given: 3554

Default

Ground bond tester would be a good way to test for poor continuity. Who else has one of those

Put 10A through it and measure the voltage drop. That's how we do in the medical design business.

__________________
- Andrew
passedpawn is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2012, 02:41 AM   #12
whoaru99
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2012
Posts: 1,614
Liked 127 Times on 104 Posts
Likes Given: 17

Default

Not me, but I do have access to a thermal imager which clearly shows poor connections (under load).

__________________

Drinking: Russian Imperial Stout
Drinking: Pre-prohibition Lager
In-process: Another batch of Pre-prohibition Lager
Next up: Scottish Wee Heavy

whoaru99 is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2012, 03:54 AM   #13
P-J
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Charlotte, NC
Posts: 3,323
Liked 289 Times on 229 Posts
Likes Given: 478

Default

Never mind....

I'm astonished..

__________________

Reason: Changed my reply.
P-J is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2012, 04:47 AM   #14
whoaru99
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2012
Posts: 1,614
Liked 127 Times on 104 Posts
Likes Given: 17

Default

Quote:
Originally Posted by P-J View Post

I'm astonished..
Me too.
__________________

Drinking: Russian Imperial Stout
Drinking: Pre-prohibition Lager
In-process: Another batch of Pre-prohibition Lager
Next up: Scottish Wee Heavy

whoaru99 is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2012, 12:54 PM   #15
stlbeer
Senior Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
stlbeer's Avatar
Recipes 
 
Join Date: Jan 2008
Location: Fenton, MO
Posts: 936
Liked 35 Times on 34 Posts
Likes Given: 90

Default

Thanks for sharing. It reinforces the requirements for solid connections and serves as a lesson for all of us wannabe electricians.

__________________
My RIMS eBrewery build
stlbeer is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2012, 01:30 PM   #16
grandequeso
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2012
Location: jacksonville, fl
Posts: 184
Liked 11 Times on 11 Posts
Likes Given: 7

Default

When tightening your terminals use a slotted (flat head) screwdriver. Its hard to get enough torque with a phillips screwdriver

__________________
grandequeso is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2012, 01:47 PM   #17
dcarter
Feedback Score: 0 reviews
Brew Setups
Recipes 
 
Join Date: Oct 2006
Posts: 386
Liked 26 Times on 21 Posts
Likes Given: 10

Default

Scary. I will re-tighten all of my connections immediately. Thanks for sharing!

__________________
Primary:Sierra Nevada Pale Ale Clone

My trash heap fridge rescue and conversion to a first class fermentation chamber

If you don't like your job, you don't strike!.....You just go in everyday and do it really half a$$ed, THATS the American way! - Homer J Simpson
dcarter is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2012, 01:52 PM   #18
Triple9
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Melrose, MA
Posts: 37
Liked 1 Times on 1 Posts

Default

In hindsight, I think installing the receptacles in the panel and then installing the wires might have contributed to the problem. Smaller space to really torque everything down well. This may be a good opportunity the break down the whole 240 side of the panel and tighten it up.

__________________
Triple9 is offline
castermmt Likes This 
Reply With Quote Quick reply to this message
Old 11-18-2012, 02:25 PM   #19
castermmt
HBT_LIFETIMESUPPORTER.png
Feedback Score: 1 reviews
 
castermmt's Avatar
Recipes 
 
Join Date: Dec 2010
Location: Lowell, Indiana
Posts: 219
Liked 11 Times on 7 Posts
Likes Given: 23

Default

Wow, the side view looking at the screw looks like the jacket was still on the wire and looks like its outside of the clamp. If that's the case you may want to recheck all your connections. Each fitting/receptacle if you look real close has a template that tells you how far to trim back the wire jacket.

Thankfully you went back to check on it and prevented a fire.

Be Safe, Castermmt

__________________

Fuzzy Logic Brewery, Check it out here http://www.homebrewtalk.com/f170/fuz...rewery-288498/

castermmt is offline
 
Reply With Quote Quick reply to this message
Old 11-18-2012, 02:30 PM   #20
passedpawn
Waste Allocation Load Lifter - Earth Class
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
passedpawn's Avatar
Recipes 
 
Join Date: Apr 2009
Location: ☼ Clearwater, FL ☼
Posts: 20,783
Liked 4123 Times on 2527 Posts
Likes Given: 3554

Default

Quote:
Originally Posted by whoaru99 View Post
Not me, but I do have access to a thermal imager which clearly shows poor connections (under load).
Yea, my friend has one and we use it to find hot parts on ckt boards. They are pretty nifty.
__________________
- Andrew
passedpawn is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Houston we have a problem! mux General Beer Discussion 11 03-04-2012 02:38 AM
Houston, we have a problem. johnodon General Beer Discussion 11 10-05-2010 09:37 PM
Houston, is there a problem? PeteOz77 Beginners Beer Brewing Forum 12 01-01-2008 05:57 PM
Houston we have a problem! ChefyTim All Grain & Partial Mash Brewing 10 06-04-2007 04:14 PM
Houston we have a problem.... robmee General Techniques 15 09-21-2005 04:37 AM



Newest Threads

LATEST SPONSOR DEALS