Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Electric Brewing > Hop Rehab E-Herms build
Reply
 
LinkBack Thread Tools
Old 12-20-2012, 12:15 AM   #21
smittygouv30
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Fayetteville, NC
Posts: 335
Liked 19 Times on 17 Posts
Likes Given: 4

Default

Quote:
Originally Posted by mrwizard0 View Post
I have a pause/reset toggle switch for my timer, I really like that to keep from playing with the small buttons on my timer. I used an on-off-momentary on switch to have it all in one.
Ahhh, yea i'm guessing that my come in handy. What timer did you use, sestos? I went to your build thread and think I might be interested in doing the same. Do you have a link to where you got it? Why did you go with that one over the Auber timers? The omega timer kal uses is outrageously priced so unfortunately that's not in the cards.

Corey
__________________
smittygouv30 is offline
 
Reply With Quote Quick reply to this message
Old 12-20-2012, 01:59 AM   #22
smittygouv30
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Fayetteville, NC
Posts: 335
Liked 19 Times on 17 Posts
Likes Given: 4

Default

More small changes to the diagram and control panel sketch based on the feedback.



Edit: added a better quality pdf attachment

control-panel-update.jpg   hop-rehab-wiring-diagram-update.jpg  
File Type: pdf Wiring diagram update.pdf (259.6 KB, 42 views)
__________________
smittygouv30 is offline
 
Reply With Quote Quick reply to this message
Old 12-20-2012, 02:27 AM   #23
mrwizard0
Feedback Score: 1 reviews
Recipes 
 
Join Date: May 2010
Location: Enid, OK
Posts: 424
Liked 21 Times on 20 Posts

Default

Quote:
Originally Posted by smittygouv30

Ahhh, yea i'm guessing that my come in handy. What timer did you use, sestos? I went to your build thread and think I might be interested in doing the same. Do you have a link to where you got it? Why did you go with that one over the Auber timers? The omega timer kal uses is outrageously priced so unfortunately that's not in the cards.

Corey
I did use a sestos one. Cost was the big reason I got that one instead of the one map used. It also has 4 buttons to change the time like the omega one which I liked. I got it off eBay but I don't remember who from. I got it for around $28 shipped so it was a bit cheaper than the auber one as well
__________________
mrwizard0 is offline
 
Reply With Quote Quick reply to this message
Old 12-20-2012, 05:04 PM   #24
smittygouv30
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Fayetteville, NC
Posts: 335
Liked 19 Times on 17 Posts
Likes Given: 4

Default

Any regrets with the sestos? I have been back and forth deciding if I should go with ASL-51 or JSL-71. I think the JSL will look better as it has the red top row and green bottom row that will match the same color scheme as the auber PIDs.

Corey

__________________
smittygouv30 is offline
 
Reply With Quote Quick reply to this message
Old 12-20-2012, 07:11 PM   #25
mrwizard0
Feedback Score: 1 reviews
Recipes 
 
Join Date: May 2010
Location: Enid, OK
Posts: 424
Liked 21 Times on 20 Posts

Default

I've only been able to use mine once but I haven't had any problems. The directions are terrible though. It took a while to get it set up because I struggled with their Chinese to English translations

__________________
mrwizard0 is offline
 
Reply With Quote Quick reply to this message
Old 12-21-2012, 02:34 AM   #26
smittygouv30
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Fayetteville, NC
Posts: 335
Liked 19 Times on 17 Posts
Likes Given: 4

Default

Ok thanks man, I think I'll probably end up sticking with one of the auber timers. Most likely the JSL, but we'll see.
Are you going to be using 2 coolers for your eHERMS? Thats shat i palne to do. if so, have you already installed an element in the cooler and have you taken any specific grounding precautions? I'm unsure exactly what should be different, if anything, with installing a heating element in the bottom of a cooler. I plan to install the element the same way kal did in the side of his stainless kettles.

Corey

__________________
Hop Rehab Electric Brewery

Keg 1: The Electric S'more Stout
Keg 2: Sorachi Ace Clone
Keg 3: Bourbon Barrel Porter
Keg 4: Two-hearted Ale clone

Primary: Empty
Secondary: Lemongrass Wheat Kolsch
smittygouv30 is offline
 
Reply With Quote Quick reply to this message
Old 12-21-2012, 02:48 AM   #27
mrwizard0
Feedback Score: 1 reviews
Recipes 
 
Join Date: May 2010
Location: Enid, OK
Posts: 424
Liked 21 Times on 20 Posts

Default

I'm going to get another kettle, the only problem I have is that swmbo won't let me spend too much right now. It'll be a few more months before I can get the rest of my stuff

__________________
mrwizard0 is offline
 
Reply With Quote Quick reply to this message
Old 12-26-2012, 11:54 PM   #28
smittygouv30
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Fayetteville, NC
Posts: 335
Liked 19 Times on 17 Posts
Likes Given: 4

Default

Santa delivered lots of good stuff yesterday from brewershardware, bargainfittings, and Morebeer. So much shiny stainless steal!

I'm reviewing my build plans to try and finalize my order for all the control panel parts. I have planned to order the auber enclosure which is 16x12x5.5. I think the height and width are perfect but my worry is about the depth. The PIDs are just under 4" deep and other items have a depth of 2"+ such as the circuit breakers. My question is do I need to get a deeper enclosure or will I be able to stagger things enough to make it work?

Thanks,
Corey

__________________
Hop Rehab Electric Brewery

Keg 1: The Electric S'more Stout
Keg 2: Sorachi Ace Clone
Keg 3: Bourbon Barrel Porter
Keg 4: Two-hearted Ale clone

Primary: Empty
Secondary: Lemongrass Wheat Kolsch
smittygouv30 is offline
 
Reply With Quote Quick reply to this message
Old 12-27-2012, 12:08 AM   #29
mrwizard0
Feedback Score: 1 reviews
Recipes 
 
Join Date: May 2010
Location: Enid, OK
Posts: 424
Liked 21 Times on 20 Posts

Default

I have seen people on here use 6" deep ones and they said they are tight. I would suggest mapping out where you are going to put each it to make sure that they aren't going to cause a conflict. You may also want to wait until you have most of the parts to actually make sure they won't touch before you get the enclosure, though it may be tough since you are probably buying the pids from auber during the same shipment.

If you can get your terminal blocks behind the pids and put the circuit breakers and taller things behind the switches and lights you might be ok

__________________
mrwizard0 is offline
 
Reply With Quote Quick reply to this message
Old 12-27-2012, 02:48 PM   #30
smittygouv30
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Fayetteville, NC
Posts: 335
Liked 19 Times on 17 Posts
Likes Given: 4

Default

Thanks. I think i'll take my chances with the Auber enclosure then. Ebay has a couple enclosures posted right now that are 16x12x8, that are decently priced but would end up being 50$+ more expensive overall.

I have another question about fuses. My plan is a 5 amp inline fuse prior to the Auber PIDs and timer. Would these products from radioshack fit the bill? I plan to have 14 gauge wiring running through the fuse then to the PIDs and timer if that matters.

http://www.radioshack.com/product/in...ductId=2102784
http://www.radioshack.com/product/in...ductId=2103768

Thanks,

Corey

__________________
smittygouv30 is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
E-Herms Build Holter Electric Brewing 26 07-12-2014 01:20 AM
HLT Herms Build Jdaught Equipment/Sanitation 7 08-05-2013 01:42 PM
Another E-HERMS Build... joenads DIY Projects 34 10-07-2012 07:04 PM
My E-HERMS build pix sambogi76 Electric Brewing 5 02-21-2012 02:38 AM
My HERMS build Maltose DIY Projects 40 06-14-2011 06:31 AM