The Great Bottle Opener Giveaway

Home Brew Forums > Home Brewing Beer > Electric Brewing > Heat stick question

Reply
 
LinkBack Thread Tools
Old 01-23-2012, 09:27 PM   #1
ylpaul2000
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2011
Location: St. Charles, Illinois
Posts: 262
Liked 15 Times on 14 Posts
Likes Given: 3

Default Heat stick question

Hello all, I had a question for those of you using 120v heat sticks. So I built a heat stick using a 1500w element and checked it for leaks and all that, and it worked well for a couple of brews but recently I started having problems. About 20-30 minutes into usage it trips my GFCI, I can take it out let it cool and try again and the same thing happens. Do I have a leak somewhere that is causing the ground fault? Anyone else ever have this issue. I've checked the wiring a dozen time I know it is correct, I stopes just short of tearing apart the heat stick to check there.

__________________
ylpaul2000 is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2012, 11:19 PM   #2
wyzazz
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: Atwater, OH
Posts: 4,263
Liked 39 Times on 39 Posts
Likes Given: 48

Default

Water is getting in somehow, you've got a leak my friend.

__________________
Quote:
Originally Posted by Revvy View Post
And I'd like to see my 1.080 beers ready from grain to glass in a week, and served to me by red-headed twin penthouse pets wearing garter belts and fishnet stockings, with Irish accents, calling me "master luv gun," but we can't always get what we want can we? :)
wyzazz is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2012, 12:00 AM   #3
millstone
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2007
Location: In front of my computer in Hammond IN
Posts: 146
Liked 2 Times on 2 Posts
Likes Given: 2

Default

On one of my heat sticks developed a leak, a hair line crack at the bend. Hard to see, but was getting water in the unit.

tom

__________________
millstone is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2012, 12:47 AM   #4
Dgonza9
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: Evanston, Illinois
Posts: 1,183
Liked 9 Times on 9 Posts

Default

I had the same thing happen with mine after about 6 months of use. The J-bend one.

I went to mounting elements in the keggle, which I recommend.

__________________
On Tap: Belgian Barrel Aged Barleywine, Da Yooper's Oatmeal Stout, Breakfast Stout, Hop Your Face Off IIPA, Catcher in the Rye Saison, "Wino-head" Nelsin Sauvin Gumballhead.

Bourbon Barrel Duchesse De Bourgnone
Kegged:

Fermenting English Mild

on Deck: Lager?
Dgonza9 is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2012, 12:49 AM   #5
ylpaul2000
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2011
Location: St. Charles, Illinois
Posts: 262
Liked 15 Times on 14 Posts
Likes Given: 3

Default

Ya I figured it was a leak, I was just hoping not to hear the truth. Well at least My GFCI did the right thing!

__________________
ylpaul2000 is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2012, 12:57 AM   #6
ylpaul2000
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2011
Location: St. Charles, Illinois
Posts: 262
Liked 15 Times on 14 Posts
Likes Given: 3

Default

Mine was a "J" Bend type as well, I used two packages of JB Weld but I guess it wasn't enough. I guess I need to really load up the bottom end of the stick with that stuff!

__________________
ylpaul2000 is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2012, 03:37 AM   #7
ylpaul2000
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2011
Location: St. Charles, Illinois
Posts: 262
Liked 15 Times on 14 Posts
Likes Given: 3

Default

So just in case you've never seen one this is what it looked like when I tore apart my dead heat stick

image-2281214468.jpg



image-4102697208.jpg



image-4273942397.jpg

This last picture is where I think the problem began notice the cracks around the threading, this is where I think the water entered.

__________________
ylpaul2000 is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools