Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > Electric Brewing > Electric burners - Any builders out there?
Reply
 
LinkBack Thread Tools
Old 03-21-2011, 04:30 PM   #151
Walker
I use secondaries. :p
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Walker's Avatar
Recipes 
 
Join Date: Sep 2005
Location: Cary, NC
Posts: 11,236
Liked 89 Times on 79 Posts
Likes Given: 11

Default

yes, but you have a more modules than you really need. each module can have a wire connected to both sides of it.

So, with two of the modules jumpered together, you can connect 4 wires together at that point.

__________________
Ground Fault Brewing Co.
Walker is offline
 
Reply With Quote Quick reply to this message
Old 03-21-2011, 04:40 PM   #152
CidahMastah
HBT_SUPPORTER.png
Feedback Score: 2 reviews
Recipes 
 
Join Date: Nov 2010
Location: , New York
Posts: 4,266
Liked 37 Times on 35 Posts
Likes Given: 17

Default

I gotcha. So the power feed in, then 3 terminals to pull off (using the remaining 3 spots) - see pic.

I think I am going to go with this switch. I assume 125V is ok? It will only get a feed of 120.

http://www.mouser.com/ProductDetail/...51GgJXHqhCg%3d


Assumptions:
1. A would be from the wall line into the box
2. the box represents two terminals jumpered together

So it looks like I would need 10 terminals. But I will grab a few extra for potential future upgrades

.jpg  
__________________

Man,... That's a lotta hooch!
Steel rig in progress
ebuild info

CidahMastah is offline
 
Reply With Quote Quick reply to this message
Old 03-21-2011, 04:48 PM   #153
Walker
I use secondaries. :p
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Walker's Avatar
Recipes 
 
Join Date: Sep 2005
Location: Cary, NC
Posts: 11,236
Liked 89 Times on 79 Posts
Likes Given: 11

Default

Quote:
Originally Posted by CidahMastah View Post
I think I am going to go with this switch. I assume 125V is ok? It will only get a feed of 120.

http://www.mouser.com/ProductDetail/...51GgJXHqhCg%3d
yes. 125 is greater than 120.
__________________
Ground Fault Brewing Co.
Walker is offline
 
Reply With Quote Quick reply to this message
Old 03-21-2011, 04:50 PM   #154
Walker
I use secondaries. :p
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Walker's Avatar
Recipes 
 
Join Date: Sep 2005
Location: Cary, NC
Posts: 11,236
Liked 89 Times on 79 Posts
Likes Given: 11

Default

Quote:
Originally Posted by CidahMastah View Post
I gotcha. So the power feed in, then 3 terminals to pull off (using the remaining 3 spots) - see pic.


A would be from the wall line into the box
Yes. Assuming this is your "neutral" block, this is just fine. So, only two modules needed to make the neutral distribution.
__________________
Ground Fault Brewing Co.
Walker is offline
CidahMastah Likes This 
Reply With Quote Quick reply to this message
Old 03-21-2011, 05:07 PM   #155
CidahMastah
HBT_SUPPORTER.png
Feedback Score: 2 reviews
Recipes 
 
Join Date: Nov 2010
Location: , New York
Posts: 4,266
Liked 37 Times on 35 Posts
Likes Given: 17

Default

Quote:
Originally Posted by Walker View Post
yes. 125 is greater than 120.
Like I said, insecure much about electrical?... yup

haha.

Just about to place a mouser order - thanks a lot for the help walker!!

Almost all my stuff for the box is in, in the mail, or on order. Wouldn't ahve been able to gather it all without your help!

And yes, that would be my neutral terminal
__________________

Man,... That's a lotta hooch!
Steel rig in progress
ebuild info

CidahMastah is offline
 
Reply With Quote Quick reply to this message
Old 03-22-2011, 02:24 PM   #156
Walker
I use secondaries. :p
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Walker's Avatar
Recipes 
 
Join Date: Sep 2005
Location: Cary, NC
Posts: 11,236
Liked 89 Times on 79 Posts
Likes Given: 11

Default

Quote:
Originally Posted by CidahMastah View Post
Like I said, insecure much about electrical?... yup

haha.

Just about to place a mouser order - thanks a lot for the help walker!!

Almost all my stuff for the box is in, in the mail, or on order. Wouldn't ahve been able to gather it all without your help!

And yes, that would be my neutral terminal
If it's not too late... make sure you order some extra terminal modules. They are cheap, but if you have to go back in a month and order 2 more and play shipping on them, it would suck.
__________________
Ground Fault Brewing Co.
Walker is offline
 
Reply With Quote Quick reply to this message
Old 03-22-2011, 03:49 PM   #157
CidahMastah
HBT_SUPPORTER.png
Feedback Score: 2 reviews
Recipes 
 
Join Date: Nov 2010
Location: , New York
Posts: 4,266
Liked 37 Times on 35 Posts
Likes Given: 17

Default

Ha - my thoughts exactly. I ordered some extra partitions, terminal modules, jumpers and even switches. Just in case I get a bad one, or in case I count wrong.

I am hoping to dry fit everything in the auberins box this weekend and plan out my layout for wiring (make it pretty).

I think I am going to run everything on 12g wire in the enclosure (except for the element which will be on 10g). Figured it will be easier to buy 4 wire color types in 12g than some on 12 and some in 14).

Now the trick is to dodge my wife and get all these packages in the house - to minimize the appearance of cost!

__________________

Man,... That's a lotta hooch!
Steel rig in progress
ebuild info

CidahMastah is offline
 
Reply With Quote Quick reply to this message
Old 03-22-2011, 06:48 PM   #158
CidahMastah
HBT_SUPPORTER.png
Feedback Score: 2 reviews
Recipes 
 
Join Date: Nov 2010
Location: , New York
Posts: 4,266
Liked 37 Times on 35 Posts
Likes Given: 17

Default

Walker wanted to ask you. I am going to either run a long extension line (10/3 rubber coated all weather) from pots to auberins box, or (10/4) from the 240 outlet on the garage wall to the auberins box.

Do you find with your set up you prefer to have your PID closer to the brew stuff? Or do youhave it a bit away and on the wall?

Part of me is thinking I want the box on the wall, away from harm (boiling work, HLT spills, etc.). Another part says it might be cheaper to run the longer 10/4 line so the cords to the HLT and BK are shorter.

Any usability thoughts from your own system?

__________________

Man,... That's a lotta hooch!
Steel rig in progress
ebuild info

CidahMastah is offline
 
Reply With Quote Quick reply to this message
Old 03-22-2011, 07:01 PM   #159
bruin_ale
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2009
Location: Campbell, CA
Posts: 1,434
Liked 16 Times on 16 Posts

Default

I have a 10/4 running to my control panel, and 8 ft of 10/3 SOOW to each kettle from there. My control panel box sits on a fold out table well out of harms way. Close enough to flip a switch to turn on the pump, but far enough away that it doesn't get splashed. Works pretty well..

BTW, the 16 feet of 10/3 was about $25 total from Lowes at I think $1.65 a foot.

__________________
San Jose Homebrew Club - The Grain Trust
bruin_ale is offline
 
Reply With Quote Quick reply to this message
Old 03-22-2011, 07:33 PM   #160
CidahMastah
HBT_SUPPORTER.png
Feedback Score: 2 reviews
Recipes 
 
Join Date: Nov 2010
Location: , New York
Posts: 4,266
Liked 37 Times on 35 Posts
Likes Given: 17

Default

I was actually surprised at how cool some of the bulk wire was at HD. Thanks for the tips!

__________________

Man,... That's a lotta hooch!
Steel rig in progress
ebuild info

CidahMastah is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Electric Question Ohio-Ed Electric Brewing 368 04-12-2014 04:25 PM
My electric build. ikonis Electric Brewing 17 03-30-2012 03:09 PM
New Electric Build eric_pwb Electric Brewing 19 03-10-2011 09:03 PM
Electric Brew Set-Up Maxkling Electric Brewing 11 02-12-2011 12:08 PM
Electric VS Nat Gas (not propane) JimWard Electric Brewing 20 12-31-2010 06:20 PM



Newest Threads

LATEST SPONSOR DEALS