New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Home Brewing Beer > Electric Brewing > eHearms question




Reply
 
LinkBack Thread Tools Display Modes
Old 12-30-2012, 02:29 AM   #1
iasteeler
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Fort Dodge, Iowa
Posts: 27
Likes Given: 2

Default eHearms question

I am in the middle of an electric build, a lot of thanks to the threads here and the electric brewery. I bought the 50 foot ss tubing and tried to form it for the hearms coil, and now I have 50 foot of scrap tubing.

I found a place, Stainless Brewing, that sells preformed hearms coils. My question is do you need all 50 foot, or would 25 feet be enough to maintain the mash temp? I'm using keggles, and it seems that I'll have to heat a lot of water just to keep the coil submerged. Thanks for all the help.



__________________
iasteeler is online now
 
Reply With Quote Quick reply to this message
Old 12-30-2012, 02:37 AM   #2
kosmokramer
HBT_SUPPORTER.png
Feedback Score: 2 reviews
Recipes 
 
Join Date: Aug 2011
Location: SoCal
Posts: 1,326
Liked 33 Times on 28 Posts
Likes Given: 34

Default

I'm using 50 feet from stainless brewing in my setup. I have only used it once so far but I basically filled my mlt with all strike water and filled the hlt all the way up. I recirculated through the Hermes coil while the hlt was coming to temp. It took about an hour to bring about 14 gallons in the hlt and 7 gallons in the mlt to 167. I had enough water in the hlt to sparge and clean.

I don't know if 50 is necessary but it isn't really an issue of having to much water, at least for a ten gallon batch

kosmokramer is offline
 
Reply With Quote Quick reply to this message
Old 12-30-2012, 02:37 AM   #3
P-J
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Charlotte, NC
Posts: 3,154
Liked 234 Times on 188 Posts
Likes Given: 398

Default

25' is more than enough for thermal exchange as long as you have good thermal exchange on the exterior of the coil. (Recirculation pump or a stir method to keep the fluid in motion.)

__________________
P-J is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
European bottle capping question + yeast starter question Rev2010 Beginners Beer Brewing Forum 12 12-01-2013 03:37 AM
Stock pot question and general nrmew brewer question Charliehart1 Beginners Beer Brewing Forum 8 04-19-2011 03:33 PM
Idopher question and basic yeast washing question msa8967 Beginners Beer Brewing Forum 2 02-12-2011 04:21 PM
Quick temprate question, and promary/secondary question. Cazamodo Fermentation & Yeast 4 10-23-2010 08:52 PM
Making Chocolate Oatmeal stout. OG question and smack pack starter Question. britishbloke Beginners Beer Brewing Forum 10 02-23-2007 05:01 PM