New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Home Brewing Beer > Electric Brewing > E-keggle




Reply
 
LinkBack Thread Tools Display Modes
Old 05-15-2011, 06:13 PM   #1
stokems
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Location: Boston
Posts: 165
Liked 2 Times on 2 Posts
Likes Given: 3

Default E-keggle

I'm converting from propane to electric, Sooo.......I finished all my drilling and used Kal's way of putting the element in. I just have one problem. I can't get the nut to screw on the end of the element.

Seriously need some help here. Don't want to Wreck my keggle. Any ideas?



__________________
stokems is offline
 
Reply With Quote Quick reply to this message
Old 05-15-2011, 06:49 PM   #2
BeantownD
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Wakefield, MA, MA
Posts: 46
Liked 2 Times on 2 Posts
Likes Given: 6

Default

Is it not threading properly, or you can't get a wrench on it? What about a heater element wrench? Not sure if it would fit, but you could take the nut to the home depot and see before you buy the wrench. Where in Boston are you? I'm out in Wakefield. I have an e-brewery that uses heaststicks- moving to e-keggle, etc soon.



__________________
BeantownD is offline
 
Reply With Quote Quick reply to this message
Old 05-15-2011, 07:00 PM   #3
stokems
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Location: Boston
Posts: 165
Liked 2 Times on 2 Posts
Likes Given: 3

Default

I have it through the junction box and the keggle wall. It won't thread due to it not being long enough. I'm in roslindale.

__________________
stokems is offline
 
Reply With Quote Quick reply to this message
Old 05-15-2011, 07:15 PM   #4
NattyBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: Cincinnati, Ohio
Posts: 211
Liked 3 Times on 3 Posts

Default

Just a suggestion because I did this myself but the element ships with a black rubber gasket at the base of the element that needs to be removed. I didn't even notice it when I went to put my elements in and ran into the same problem. It was a Homer Simpson "doh" moment when I realized there was a rubber gasket on there that was causing my issues.

Matt

__________________

"Over-complicating my brew day, one gadget at a time..."

Check out the complete build of my Electric Brewery!

NattyBrew is offline
 
Reply With Quote Quick reply to this message
Old 05-15-2011, 07:45 PM   #5
stokems
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Location: Boston
Posts: 165
Liked 2 Times on 2 Posts
Likes Given: 3

Default

Yeah, I took off the gasket. I think I need to make the hole in the j-box bigger so I can get another 1/8 of an inch. I dunno.

__________________
stokems is offline
 
Reply With Quote Quick reply to this message
Old 05-15-2011, 11:06 PM   #6
hatfieldenator
Feedback Score: 1 reviews
Recipes 
 
Join Date: Sep 2010
Posts: 494
Liked 16 Times on 14 Posts
Likes Given: 3

Default

Aren't Keggle walls thicker than the blichmann kettles that Kal uses? That may be part of the problem? If I were you I would have a 1" half coupler welded on to the side of the keggle instead. That's how I did mine and I'm glad I don't have to worry about leaky gaskets or problems such as above. Its pretty cheap to get done.

__________________
hatfieldenator is offline
 
Reply With Quote Quick reply to this message
Old 05-16-2011, 01:08 PM   #7
konrad
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Central, MA
Posts: 92
Default

I was able to get my elements installed in my keggels. Which elements are you using?

__________________
konrad is offline
 
Reply With Quote Quick reply to this message
Old 05-16-2011, 01:22 PM   #8
stokems
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Location: Boston
Posts: 165
Liked 2 Times on 2 Posts
Likes Given: 3

Default

Camco 5500 watt element. I realized I made the hole in the jbox and face plate the same size. So I made the hole on the jbox bigger. We'll see if that works.

__________________
stokems is offline
 
Reply With Quote Quick reply to this message
Old 05-16-2011, 01:24 PM   #9
IrregularPulse
Hobby Collector
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
IrregularPulse's Avatar
Recipes 
 
Join Date: Nov 2007
Posts: 41,174
Liked 2729 Times on 2680 Posts
Likes Given: 99

Default

Quote:
Originally Posted by hatfieldenator View Post
Aren't Keggle walls thicker than the blichmann kettles that Kal uses? That may be part of the problem? If I were you I would have a 1" half coupler welded on to the side of the keggle instead. That's how I did mine and I'm glad I don't have to worry about leaky gaskets or problems such as above. Its pretty cheap to get done.
+1. This is what I've done to my two kegs in anticipation of a future system. I hate weldless options.
__________________
Tap Room Hobo

I should have stuck to four fingers in Vegas. :o - marubozo
IrregularPulse is offline
 
Reply With Quote Quick reply to this message
Old 05-16-2011, 01:25 PM   #10
konrad
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Central, MA
Posts: 92
Default

Yeah, that must be it.

I used the same element.



__________________
konrad is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes




Newest Threads