Happy HolidaySs Giveaway - Winners Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > Electric Brewing > Different E-Brewery
Reply
 
LinkBack Thread Tools
Old 02-04-2013, 06:18 PM   #21
ddahl84
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Minneapolis, Minnesota
Posts: 86
Liked 4 Times on 4 Posts

Default

Quote:
Originally Posted by Carlscan26
Did you lose any heat while recirculating the mash?
Ill have to get back to you on that one. I have taken several readings at the end of the 60min mash and lose 1-2 degrees, then I start a mash recirc for around 15min and don't really care about the temp since the mash is done at that point. But next brew day ill try to remember to check it out.

Update: Brewing right now and checked the temp after 50 min mash and 10 min recirc. Temp dropped by 5 degrees. One thing to mention, when I start the full recirc I put the pid temp at whatever the mash should be and during the 45-60 recirc it holds that temp.
__________________
ddahl84 is offline
Carlscan26 Likes This 
Reply With Quote Quick reply to this message
Old 02-05-2013, 07:34 PM   #22
CalypsoCowboy
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: Nampa, ID
Posts: 44
Default

Is there a reason you recirculate the mash vs. Just letting it sit in the cooler for the 60 minutes?

__________________
CalypsoCowboy is offline
 
Reply With Quote Quick reply to this message
Old 02-05-2013, 09:27 PM   #23
ddahl84
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Minneapolis, Minnesota
Posts: 86
Liked 4 Times on 4 Posts

Default

Quote:
Originally Posted by CalypsoCowboy
Is there a reason you recirculate the mash vs. Just letting it sit in the cooler for the 60 minutes?
I do let the mash sit for 45-60min then recirc/vorlauf so when I start draining it into the boil kettle it's clear wort.
__________________
ddahl84 is offline
 
Reply With Quote Quick reply to this message
Old 02-06-2013, 04:35 AM   #24
CalypsoCowboy
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: Nampa, ID
Posts: 44
Default

Okay, that make sense. Thanks

__________________
CalypsoCowboy is offline
 
Reply With Quote Quick reply to this message
Old 12-20-2013, 07:22 PM   #25
steveoatley
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2006
Location: Berkley, Michigan
Posts: 195
Liked 23 Times on 17 Posts
Likes Given: 151

Default

Hey ddahl84

I really like your build, looking to build something very similar myself
I was wondering if you had any updates ? Improvements ?
Anything you would change ?

And, do you think you could do the same as a one tier with two pumps ?
Oh, and how is that 12v pump holding up ?

Thanks
Steve

__________________
steveoatley is offline
 
Reply With Quote Quick reply to this message
Old 12-21-2013, 01:10 AM   #26
nealm
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2013
Location: Washington,DC, Maryland
Posts: 23
Default

How about more detail regarding water level control and float valves.

__________________
nealm is offline
 
Reply With Quote Quick reply to this message
Old 01-18-2014, 03:06 AM   #27
kzimmer0817
Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
kzimmer0817's Avatar
Recipes 
 
Join Date: Dec 2011
Location: Athens, GA
Posts: 268
Liked 8 Times on 7 Posts
Likes Given: 14

Default

Quote:
Originally Posted by steveoatley View Post
Hey ddahl84
And, do you think you could do the same as a one tier with two pumps ?
Oh, and how is that 12v pump holding up ?

Thanks
Steve
Steve,

I've been researching this method as well. I want to do BIAB, but I don't want to lift heavy bags of hot dripping grain. It's not that I'm not strong enough; I don't want to make a mess.

Search the electric forum for "brutus 20". Someone out there has 2 kettles set up with each recirculating back to a connection in their respective lids. When you're ready to do the "cross-sparge" (the recirculating back and forth between kettles), you simply swap lids. This is a single-tier with 2 pumps.

http://www.alenuts.com/Alenuts/brutus20.html
http://www.homebrewtalk.com/f51/brew...review-452347/
http://www.homebrewtalk.com/f11/2-vessel-system-291421/

I'm thinking that the simplest form of this mimics BIAB: you start with your entire volume of water and simply transfer half of it to the MT for mashing.

Keith
kzimmer0817 is offline
 
Reply With Quote Quick reply to this message
Old 01-18-2014, 03:08 AM   #28
kzimmer0817
Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
kzimmer0817's Avatar
Recipes 
 
Join Date: Dec 2011
Location: Athens, GA
Posts: 268
Liked 8 Times on 7 Posts
Likes Given: 14

Default

Quick question, ddahl84,
How high is the top of your MT? Do you stir your mash a few times during the mash? I like the idea of a 2-tier system, because you can get away with a single pump while the down-draining is managed by gravity. The problem, to me, is that the mashtun might be too high to easily stir.
Thanks,
Keith

__________________
http://www.homebrewtalk.com/f51/keit...keggle-353760/
http://www.homebrewtalk.com/f36/my-f...-chill-356409/
kzimmer0817 is offline
 
Reply With Quote Quick reply to this message
Old 01-18-2014, 03:03 PM   #29
kal
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
kal's Avatar
Recipes 
 
Join Date: Nov 2006
Location: Ottawa, Canada
Posts: 2,184
Liked 220 Times on 151 Posts
Likes Given: 6

Default

Nice job! I especially like the the aluminum tag!

Quote:
Originally Posted by ddahl84 View Post
I was going to go that route but decided I like the look of separate switches and lights like theelectricbrewery. Just a personal preference.
You and me both! When I designed mine I looked at combined lights & switches but didn't really like them either. Personal preference like you said.

Enjoy the setup!

Kal
__________________
TheElectricBrewery.com: A step by step guide to building your own electric brewery
My basement/bar/brewery build 2.0
kal is offline
 
Reply With Quote Quick reply to this message
Old 01-31-2014, 07:59 PM   #30
ddahl84
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Minneapolis, Minnesota
Posts: 86
Liked 4 Times on 4 Posts

Default

Thanks for the nice complements. Sorry it's taken so long to reply. The couple of things I have changed is the float switch in the mash tun, because the cheep plastic ones where not reliable and stuck under mash temps, and made a nicer switch with alarm for the solenoid water filler.
imageuploadedbyhome-brew1391197694.598839.jpgimageuploadedbyhome-brew1391197706.864708.jpgimageuploadedbyhome-brew1391197718.084769.jpg

The pump has been great. I've done over 20 batches with it and love it. I really like the fact it's DC because I have wires running up my mash tun going to a relay to control the recirc.

In my opinion I like the two tier rather than two pumps. One pump is enough for something to go wrong.

I do have to put hops in a bag now otherwise it plugs up the pump.
One more thing to anyone starting a build in there house. Don't skimp on the ventilation. I tried bath fans, range hoods, and the only thing that ended up working was a Hydrofarm 400cfm in-line duct fan. 80$ on amazon. Do this first you won't regret it.


Sent from my iPhone using Home Brew

__________________
ddahl84 is offline
orangehero Likes This 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Old Deschutes Brewery brewmaster opens a new brewery! Rivenin General Chit Chat 0 01-24-2012 05:30 PM
Nano-Brewery Interview: Blackrocks Brewery Apoxbrew General Beer Discussion 5 10-28-2011 12:37 PM
City Brewery, from WI, purchased Brewery/Bottling in Memphis JefeTheVol General Beer Discussion 0 03-31-2011 02:08 PM
Schlafle's brewery/Morgan St. Brewery St. Louis Visits VermVerm General Beer Discussion 17 03-13-2010 01:30 AM



Newest Threads

LATEST SPONSOR DEALS