The Great Bottle Opener Giveaway

Home Brew Forums > Home Brewing Beer > Electric Brewing > Control Panel, 2 circuits, RIMS and boil kettle

Reply
 
LinkBack Thread Tools
Old 02-27-2013, 04:58 PM   #1
TimL
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
TimL's Avatar
Recipes 
 
Join Date: Apr 2012
Location: Pickering, ON
Posts: 30
Default Control Panel, 2 circuits, RIMS and boil kettle

I'm in the process of gathering parts for my electronic brewery control panel build, and looking to get some feedback and suggestions. I will be controlling two heating elements on two separate circuits, a 20A 120V circuit for a 1500W RIMS tube and pump, and a 240V 30A circuit for a 5500W brew kettle element and pump. Both circuits are GFCI protected.

The parts list for the 120V 20A circuit:

20A flanged receptacle for element power cable
2x 120V 30A Auberins SPDT Mini Power Relay for circuit power and element power
15A 120V twist lock receptacle for pump power
XLR panel mount connector for temp probe
CD101 PID temperature controller
40A SSR
2 position illuminated selector switch for circuit power
2x illuminated maintained pushbutton switch
Digital dual display amp/volt panel meter with current transformer http://www.ebay.ca/itm/Digital-AC-Du...ht_3430wt_1108
various 12, 14 and 22 gauge wire


For the 240V 30A brew kettle circuit:
250V 30A flanged receptacle for element power cable
15A 120V twist lock receptacle for pump power
XLR panel mount connector for temp probe
CD101 PID temperature controller
40A SSR
2x 3 pole contactor with 120V coil, for circuit power and element power
http://trilliumcontrols.com/index.ph...catId=46&mc=15
Sestos B3S timer
120V 22mm flashing buzzer
2x 4 position 30A terminal blocks
2 position illuminated selector switch for circuit power
3x illuminated maintained pushbutton switch

Momentary push button switch for timer reset
Digital dual display amp/volt panel meter with current transformer
various 10, 14 and 22 gauge wire

I have attached a diagram of the panel layout and the circuit. I have not yet added the wiring for the PID->alarm, I'll do that last, most likely.

Does anyone see any problems with this set up, or have any suggestions for improvement? Sorry for the long post.

control-panel-layout.jpg   boil-kettle-circuit.jpg  
__________________
TimL is offline
 
Reply With Quote Quick reply to this message
Old 06-20-2013, 02:19 PM   #2
MikeyLikesIt70
HBT_SUPPORTER.png
Feedback Score: 1 reviews
 
MikeyLikesIt70's Avatar
Recipes 
 
Join Date: Sep 2008
Posts: 30
Liked 3 Times on 2 Posts

Default

How did you make out with this? It's very similar to what I'd like to do...

__________________
MikeyLikesIt70 is offline
 
Reply With Quote Quick reply to this message
Old 06-23-2013, 04:06 PM   #3
TimL
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
TimL's Avatar
Recipes 
 
Join Date: Apr 2012
Location: Pickering, ON
Posts: 30
Default

It worked out very well. I had a thread going over at the Electric Brewery forum

http://www.theelectricbrewery.com/fo...ic.php?t=26251

Here's a pic of it working:

front-view.jpg  
__________________
TimL is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My new RIMS control panel EvilBrewer Electric Brewing 63 03-03-2014 07:32 PM
Need Held Wiring Up Simple RIMS Control Panel Frogger42 Electric Brewing 6 11-10-2013 11:16 PM
Help wiring a RIMS control panel Neddy DIY Projects 2 02-10-2011 04:15 PM
Electric Brewing - Control Panel Branch Circuits Bobby_M Equipment/Sanitation 34 10-01-2010 08:33 PM