Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > Electric Brewing > bullfrog ale ebrewery build.

Reply
 
LinkBack Thread Tools
Old 10-02-2012, 09:38 AM   #11
BlackNotch
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Wilmington, DE
Posts: 141
Liked 3 Times on 3 Posts
Likes Given: 1

Default

Quote:
Originally Posted by Beeskneesbrew
Do you have McMaster part #?
Part number 7529K533 http://www.mcmaster.com/#7529K533
__________________

-Mike

BlackNotch is offline
 
Reply With Quote Quick reply to this message
Old 10-04-2012, 12:25 AM   #12
captainoverspray
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Muskego, WI
Posts: 85
Liked 2 Times on 2 Posts

Default

Quote:
Originally Posted by captainoverspray View Post
One question for the other ebrewery builders out there. My panel came used with out the inner piece where all the components will mount. I need to make one and was wondering what the material normally is. Is it steel or something else?
Anyone have any input on this? Almost to the point of laying out the inside and need to figure out what to do.
__________________
captainoverspray is offline
 
Reply With Quote Quick reply to this message
Old 10-04-2012, 03:19 AM   #13
stlbeer
Senior Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
stlbeer's Avatar
Recipes 
 
Join Date: Jan 2008
Location: Fenton, MO
Posts: 873
Liked 32 Times on 31 Posts
Likes Given: 81

Default

Quote:
Originally Posted by captainoverspray View Post
Anyone have any input on this? Almost to the point of laying out the inside and need to figure out what to do.
Mine was painted 1/8" plate steel. I drilled and tapped the holes for the components so I won't have to remove the plate from the box if I have to replace a component.
__________________
My RIMS eBrewery build
stlbeer is offline
 
Reply With Quote Quick reply to this message
Old 10-05-2012, 02:34 AM   #14
captainoverspray
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Muskego, WI
Posts: 85
Liked 2 Times on 2 Posts

Default

I think I am just going to use some 1/8 hard board for a patern and then transfer to some thin aluminum that I have laying around. I think it is also 1/8 so I could drill and tap it.

__________________
captainoverspray is offline
 
Reply With Quote Quick reply to this message
Old 10-05-2012, 03:17 AM   #15
NewBrewB
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
NewBrewB's Avatar
Recipes 
 
Join Date: Dec 2009
Location: N. Kingstown, Rhode Island
Posts: 751
Liked 19 Times on 17 Posts
Likes Given: 10

Default

Plexiglass will work too. Easy to cut/drill and does not conduct electricity.

NewBrewB is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools