Newest Threads

claudiobr74 · 06-15-2012, 12:27 PM

Hi Matho,

Would be possible change the G5SB relay for another one? Its so difficult to find in Brazil. Thank you.

matho · 06-16-2012, 05:56 AM

hey claudiobr74, the relay can be changed for any 12v relay if you are making up your own circuit, with the PCB's I have made it can't be done because the footprint is unique to that relay.

cheers steve

edit: an omron G5Q-1 can be used too and its rated at 10 amps instead of 5

claudiobr74 · 06-16-2012, 03:23 PM

Thank you Matho

Cheers Claudio

philgil · 06-19-2012, 07:07 AM

Hi Matho

Nice setup.

I am looking to automate, and have come across a couple of useful places like yours to assist. Do you have more info on the running of the device? Perhaps a manual?

matho · 06-19-2012, 08:31 PM

Hi Philgil,
I have put together a zip file that contains all the files I used to make the controller including schematics and PCB design, it also includes a construction manual and user manual. I don't mind people using the information for themselves but i don't want to see it used for commercial gain.

Brauduino ZIP

Hope this helps you with your setup

cheers steve

philgil · 06-20-2012, 06:01 AM

Many Thanks Matho...

If you see my setup, you will understand that it is definately not for commercial gain

http://www.gilchrist.co.za

MikeSar · 09-11-2012, 05:14 PM

Hey Matho,

This project looks great! I think I'm going to try to build one myself based on your PDF. Do you have a total cost for the build?

matho · 09-13-2012, 03:00 AM

hey Mike,

the cost was about $600, but $95 of that was for a pump I didn't end up using and the march pump cost about $200. The controller should cost about $170 to put together

good luck with

cheers steve

appi · 09-17-2012, 05:27 PM

Hello
where can i buy the brewmisershield? i want to build the Controller an use it in my homebrewery ( remise-braui.ch ).
thanks for the graet code.
remo

pksublime · 10-10-2012, 02:29 PM

i think i just found my next long term project