HBT 2015 Big Giveaway - Enter Now

Huge Supporting Membership Discounts - 20% Off

Home Brew Forums > Home Brewing Beer > Electric Brewing > 120V Electric Brewing Elements
Reply
 
LinkBack Thread Tools
Old 12-26-2012, 07:23 PM   #1
fatbluefrog
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2012
Posts: 6
Default 120V Electric Brewing Elements

I am looking at building a Electric All Grain Setup with an Electric HLT at the moment. I am thinking about going the route of using 120V elements as compared to the 240V elements.

Does anyone have any recommendations on what 120V elements to use?

This one is a Camaco 1500W Ultra Low Watt Density
http://www.amazon.com/Camco-02853-He...heater+element

Or should I go with a Higher Wattage saw 2000W
http://www.amazon.com/Camco-02203-20...heater+element

Now when building this I am considering using 2 120V elements as I can have two outlets on different breakers available.

Also anyone have first hand experience of the time it would take for 120V elements to heat up a HLT. I would only be heating say 5 to 10 gallons at a time.

__________________
fatbluefrog is offline
 
Reply With Quote Quick reply to this message
Old 12-27-2012, 06:05 PM   #2
schmoe
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
schmoe's Avatar
Recipes 
 
Join Date: Jan 2011
Location: St. Louis, Missouri
Posts: 522
Liked 50 Times on 45 Posts
Likes Given: 2

Default

I use 2, 120 volt 1,500 watt heaters. I think it takes 35-45 minutes to heat up about 8 gallons of water from 65 to 160 or so. About the same to get it boiling. I think the Camco element is fairly typical. I got my elements from http://www.plumbingsupply.com/elements.html

__________________
schmoe is offline
 
Reply With Quote Quick reply to this message
Old 12-27-2012, 11:38 PM   #3
wilserbrewer
BIAB Expert Tailor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 10 reviews
 
wilserbrewer's Avatar
Recipes 
 
Join Date: May 2007
Location: Jersey Shore, Jersey
Posts: 7,684
Liked 684 Times on 548 Posts
Likes Given: 15

Default

If you have 20 amp circuits, I would go w/ the 2000w elements for faster heating. 3000 - 4000w total will give you decent heating times for 5-10 gallon batches, on par w/ propane I'd guess. I do 1/4 keg 7.75 gallon batches with 2 at 2000w, 4000w total and it is reasonably quick.

wilserbrewer is online now
 
Reply With Quote Quick reply to this message
Old 12-28-2012, 01:48 PM   #4
fatbluefrog
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2012
Posts: 6
Default

Well that sounds good and probably what I'll go with.

Do you have any issue with the 2000W elements and scorching the wort?

Do you use them for just for your Hot Liquor Tank or for Boiling Wort too?

Also those elements are safe to use for potable water, I know its a silly question but rather ask then be sorry. Since they are for water heaters I am assuming that they wont be an issue.

Quote:
Originally Posted by wilserbrewer View Post
If you have 20 amp circuits, I would go w/ the 2000w elements for faster heating. 3000 - 4000w total will give you decent heating times for 5-10 gallon batches, on par w/ propane I'd guess. I do 1/4 keg 7.75 gallon batches with 2 at 2000w, 4000w total and it is reasonably quick.
__________________
fatbluefrog is offline
 
Reply With Quote Quick reply to this message
Old 12-28-2012, 01:54 PM   #5
fatbluefrog
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2012
Posts: 6
Default

Awesome that sounds perfect. I'm going to use two of the 2000W elements that I posted. Thanks for the feedback.

Quote:
Originally Posted by schmoe View Post
I use 2, 120 volt 1,500 watt heaters. I think it takes 35-45 minutes to heat up about 8 gallons of water from 65 to 160 or so. About the same to get it boiling. I think the Camco element is fairly typical. I got my elements from http://www.plumbingsupply.com/elements.html
__________________
fatbluefrog is offline
 
Reply With Quote Quick reply to this message
Old 12-28-2012, 02:04 PM   #6
Spintab
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Atlanta, Georgia
Posts: 470
Liked 36 Times on 27 Posts
Likes Given: 2

Default

I use a single 2000w element from Lowes in my HLT. Takes about 45 minutes to heat up 6-7 gal sparge water. Just enough time to fill up and flip on just after I mash in.

__________________

Primary: Honey Kolsch Take 2
Kegged: Alt
Kegged: meBohPils
Bottled: Belgian Gold

Spintab is online now
 
Reply With Quote Quick reply to this message
Old 12-28-2012, 03:36 PM   #7
wilserbrewer
BIAB Expert Tailor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 10 reviews
 
wilserbrewer's Avatar
Recipes 
 
Join Date: May 2007
Location: Jersey Shore, Jersey
Posts: 7,684
Liked 684 Times on 548 Posts
Likes Given: 15

Default

Quote:
Originally Posted by fatbluefrog View Post
Do you have any issue with the 2000W elements and scorching the wort?

Do you use them for just for your Hot Liquor Tank or for Boiling Wort too?
Only had scorching once, and it was my fault and really bad, I had to dump 15 gallons! The reason is that I paused my brew session to run some errands, the trub all settled and scorched on the elements, during a normal brew session, or if I had merely stirred and resuspended the trub I would not have had a problem. Also, clean the elements well after each session, a build up can also possibly promote scorching ...overall I am very satisfied w/ 2000w 120v high density elements.
__________________
wilserbrewer BIAB bags
custom sized BIAB Bags, hop bags and ratchet pulleys at reasonable prices


Http://biabbags.webs.com/

Corona Mill Bucket System V. 2
wilserbrewer is online now
 
Reply With Quote Quick reply to this message
Old 12-30-2012, 11:11 PM   #8
fatbluefrog
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2012
Posts: 6
Default

Awesome. Double 2000W element build it is. Thanks for the feedback guys.

__________________
fatbluefrog is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
120V ULWD Elements chrismtb Electric Brewing 3 11-24-2012 12:44 PM
Couple quick questions regaridng electric brewing, heating elements, etc. johnodon Electric Brewing 12 09-09-2011 01:38 PM
two 120v elements, one PID CoalCracker Brew Stands 2 08-25-2010 01:49 PM
Mounting 120V Elements in Keggle? Cpt_Kirks Kettles, Mash Tuns, & Hot Liquor Tanks 30 04-11-2010 10:44 PM
PID to control 2 120v Elements? Cpt_Kirks Brew Stands 8 12-05-2009 06:08 PM



Newest Threads

LATEST SPONSOR DEALS