Originally Posted by jppostKW
can you pressure tranfer into kegs?
It doesn't look like you can as is, since there would be no good way to seal up the hole where the bung goes.
Any reason it can't come with an undrilled top and an additional port added near that top that could be used for a variety of purposes:
1. Connect a piece of tubing that functions as a blow off and runs down into a bucket
2. Connects to a shorter bit of tubing that goes up so you can stick an airlock on the end. Put in a small bracket to hold this small piece of tubing.
3. Connect to a CO2 supply so that you can pressure transfer