Come enter the BrewHardware Giveaway!


Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > No kreusen
Reply
 
LinkBack Thread Tools
Old 03-07-2012, 03:56 PM   #1
Cromwell
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: Thousand Oaks, CA
Posts: 778
Liked 74 Times on 60 Posts
Likes Given: 132

Default No kreusen

I'm making a yeast starter, and for this one I did a mini-mash of 2lbs of 2 row to make a gallon of wort to use as starter. But when I pitched the yeast into a quart of it, I have absolutely no kreusen - no bubbles at all.
I'm trying to figure out why and the only two things I've done differently are that I mashed some 2 row instead of using DME but the SG is about 1.045, so I think it's good...
And I used a drop of Fermtabs. So, does Fermtabs kill kreusen? If so, how do I tell if the yeast are growing? It's a little tough to take a gravity sample from a 1L starter...

__________________

Primary: Beer / Secondary: Beer / Lagering: Old beer.

Cromwell is offline
 
Reply With Quote Quick reply to this message
Old 03-07-2012, 04:00 PM   #2
TyTanium
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2011
Posts: 3,949
Liked 549 Times on 387 Posts
Likes Given: 418

Default

Taste a small sample. Does it taste like sweet wort? Or more "beerish"? Trust that the yeast know what they're doing...they live to eat sugar.

Most starters krausen & finish pretty darn quick, so it's possible (likley?) you could've just missed it.

__________________
TyTanium is offline
 
Reply With Quote Quick reply to this message
Old 03-07-2012, 04:03 PM   #3
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Revvy's Avatar
Recipes 
 
Join Date: Dec 2007
Location: "Detroitish" Michigan
Posts: 40,805
Liked 2799 Times on 1672 Posts
Likes Given: 3489

Default

Activity in a starter really only means one thing and one thing only.

It doesn't matter one blip in your fermenter or your starter flask if the airlock bubbles or not (if you are using an airlock and not tinfoil if you are using tinfoil, you aren't getting bibbling anyway,) or if you see a krauzen. In fact starter fermentation are some of the fastest or slowest but most importantly, the most boring fermentations out there. Usually it's done withing a few hours of yeast pitch...usually overnight when we are sleeping, and the starter looks like nothing ever happened...except for the little band at the bottom. Or it can take awhile...but either way there's often no "activity" whatsoever....

I usually run my stirplate for the first 24 hours, then shut it down, if you are spinning your starter it is really hard to get a krausen to form anyway, since it's all spinning, and there's often a head of foam on it from the movement.


All that really matters is that creamy band o yeast at the bottom.





This is a chilled sample so it's flocculated, but even with an unchilled sample you should see a band of yeast at the bottom. Here's an unchilled version



Same thing, a band.

As it is I've only ever seen two or three krausens actually on my starter (one blew off a bunch of krausen and knocked the tinfoil off the flask,) and the evidence of one on the flask at the "waterline" once. But I've never not had a starter take off.

Look for the yeast at the bottom, don't worry what it looks like on top.

If you have yeast on the bottom....that's all you really need.

If it looks anything like that, your are ready to either feed it again, or use it.

__________________

Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

Revvy is offline
 
Reply With Quote Quick reply to this message
Old 03-07-2012, 04:09 PM   #4
Cromwell
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: Thousand Oaks, CA
Posts: 778
Liked 74 Times on 60 Posts
Likes Given: 132

Default

Ok, thanks. I'll taste it, and I'll pitch the second step on the yeast cake. But since I pitched a tube of yeast, wouldn't that make a band of yeast on the bottom even if it was dead? I'm using a stir plate, so I can see that I might miss a krausen, although I've always seen one before.

But I'm still curious - does Fermcap keep krausen down?

__________________

Primary: Beer / Secondary: Beer / Lagering: Old beer.

Cromwell is offline
 
Reply With Quote Quick reply to this message
Old 03-07-2012, 04:12 PM   #5
badbrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: l.a., ca
Posts: 1,372
Liked 11 Times on 11 Posts
Likes Given: 1

Default

You still see no tiny bubbles rising at the surface with a stir plate after a few hours? And fermcap will cap the krausen down but 1 drop shouldn't eliminate it all together.

__________________
badbrew is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
white stuff in Kreusen ring Old_E Fermentation & Yeast 2 04-08-2011 03:26 PM
Kreusen wont fall dtfeld Fermentation & Yeast 9 02-15-2011 01:50 PM



Newest Threads

LATEST SPONSOR DEALS