Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > Lost Yeast?
Reply
 
LinkBack Thread Tools
Old 10-29-2009, 04:10 PM   #1
BackYard
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: NJ
Posts: 3
Default Lost Yeast?

I brewed an Imperial Stout and tried to do the primary in corny keg...I have done this before with no problems. I connect a blow-off hose to the gas in post and run it into a bucket of water. this time however I noticed very little bubbling from what was a very high grain load. When I pulled the relief valve to check the pressure the noise was deafening. It turns out that the Poppet may have been sticking and not relieving enough pressure. I quickly decided to transfer to another keg before disaster struck. When I transferred it the amount of foam that cam out of the gas in line of the receiver keg was ridiculous. Now a week later and I am barely building any pressure in the keg. I think I may have lost my yeast, so my question is, can I throw some yeast in a new keg, and transfer the beer again to see if fermentation will start again?

If so should I make a starter, or can I just put dry yeast in the keg before I transfer?

Thanks.

__________________
BackYard is offline
 
Reply With Quote Quick reply to this message
Old 10-29-2009, 04:26 PM   #2
JesseRC
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2008
Location: San Antonio
Posts: 1,784
Liked 10 Times on 9 Posts
Likes Given: 1

Default

it was probably a bit carbonated which created more foam in the transfer. Depdending on when you transfered, it may have already been done. Did you take a gravity reading.

__________________

Jesse

Primaries: Mojave Red (AG)
Kegs: Hibiscus Saison (AG), Orange Kolsch (AG) , Cocunut Porter
Future Brew: Wee Heavy

JesseRC is offline
 
Reply With Quote Quick reply to this message
Old 10-29-2009, 04:44 PM   #3
BackYard
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: NJ
Posts: 3
Default

I did not take a gravity reading, never do, but this is supposed to be a 4 month fermentation conditioning process, and it went dormant after 1 week? can't imagine that. Will adding yeast cause any problems?

Thanks!

__________________
BackYard is offline
 
Reply With Quote Quick reply to this message
Old 10-29-2009, 05:02 PM   #4
jjp36
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Philadelphia
Posts: 406
Liked 5 Times on 5 Posts
Likes Given: 2

Default

I've had big beers that have fermented out in a week. And if your planning on waiting 4 months it should definitely be done by then (there shouldn't be any activity after about 2-3 weeks anyway since the bulk of that time is for conditioning).

You could pitch more yeast. It might attenuate a little more, but without a gravity reading we have no idea whats going on. You don't even know if there is really a problem yet.

__________________
jjp36 is offline
 
Reply With Quote Quick reply to this message
Old 10-29-2009, 05:49 PM   #5
BackYard
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: NJ
Posts: 3
Default

Thanks jjp, I collected some of the foam as it was spewing from the tank,and when it settled into liquid it tasted like I imagined it would, I am just worried that there was not enough fermentation time, before all the yeast was lost, if in fact it was.

__________________
BackYard is offline
 
Reply With Quote Quick reply to this message
Old 10-29-2009, 05:58 PM   #6
beerocd
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Posts: 698
Liked 3 Times on 3 Posts

Default

Since this is still a fairly fresh thread - do you still have a yeast cake? Could you try and revive some of that yeast, build a starter of the same yeast and repitch? Assuming it was something special, otherwise open another packet, make a starter and pitch.

Should not cause problems so long as sanitation practices are followed. You really should start taking gravity readings. You may be fixing something that's not broke.

-OCD

__________________

Due to recent economic crisis, stock market crash, budget cuts, and the rising cost of everything including taxes: "The Light at the End of The Tunnel" has been turned off.
beerocd is offline
 
Reply With Quote Quick reply to this message
Old 10-29-2009, 05:59 PM   #7
jjp36
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Philadelphia
Posts: 406
Liked 5 Times on 5 Posts
Likes Given: 2

Default

I don't think the yeast is "lost", but the pressure in the keg might have caused it to drop out sooner then it normally would have.

Did the sample taste very sweet/sugary? If it did then you might need to add more yeast. If it tasted fine then you should be alright. It should be close to done fermenting then, and there should still be enough yeast left to finish up whatever is left.

__________________
jjp36 is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shook starter too much, yeast lost BlackDogBrewing Beginners Beer Brewing Forum 3 02-01-2009 07:37 PM
Lost all my CO2! Aleforge Bottling/Kegging 10 10-20-2008 06:30 PM
I lost everything wildwest450 General Chit Chat 22 06-14-2008 08:11 AM
blow-off = yeast lost? dubbel dutch Beginners Beer Brewing Forum 7 10-06-2007 04:08 AM
little lost... Evan Beginners Beer Brewing Forum 7 10-04-2007 04:32 PM