New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > Dry Hopping in Fermenator




Reply
 
LinkBack Thread Tools Display Modes
Old 06-19-2013, 02:44 AM   #1
ndak
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Pittsburgh, PA
Posts: 12
Default Dry Hopping in Fermenator

Have a fermenator with the blow off assembly. I was wondering after primary when you start dryhopping do you connect your 1/2" barb and put a blanket of CO2 over the beer? If not what do you recommend doing?

Thanks,

Vince



__________________
ndak is offline
 
Reply With Quote Quick reply to this message
Old 06-19-2013, 11:36 AM   #2
Nagorg
If a frog had wings...
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Nagorg's Avatar
Recipes 
 
Join Date: Dec 2011
Location: , Texas
Posts: 380
Liked 41 Times on 32 Posts
Likes Given: 19

Default

I just replace the blow off with a normal bung and airlock. Technically I suppose you could blanket with CO2 but you don't need to really; I've never done that and never had any trouble! Chances are that you will still get a little more CO2 production anyway when the yeasties are stirred up a little from the dry hop addition.



__________________
Nagorg is offline
 
Reply With Quote Quick reply to this message
Old 06-19-2013, 07:03 PM   #3
BryceL
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Yorba Linda, CA
Posts: 867
Liked 29 Times on 24 Posts

Default

I agree you don't really need to, but it also wouldn't hurt if you decide to. I usually just open it up, dump the hops in and replace the blowoff with a new sanitized bung and airlock. I've never had oxidation issues. The CO2 is heavier than air so you should still have a blanket of CO2...just don't stir things up too much when you open it.

__________________
BryceL is offline
 
Reply With Quote Quick reply to this message
Old 06-19-2013, 11:12 PM   #4
ndak
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Pittsburgh, PA
Posts: 12
Default

Thank you for your help...much appreciated.

__________________
ndak is offline
 
Reply With Quote Quick reply to this message
Old 06-19-2013, 11:16 PM   #5
Jipper
Vendor
HBT_SPONSOR.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Concord, Ca
Posts: 506
Liked 42 Times on 38 Posts
Likes Given: 2

Default

You'll already have a blanket of CO2 due to the CO2 production during fermentation, so you'll be good to go!

Cheers.

__________________

Matt Monroe
MoreBeer!
Digital Marketing Manager
www.morebeer.com
Jipper is offline
 
Reply With Quote Quick reply to this message
Old 06-19-2013, 11:20 PM   #6
brewguyver
Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
brewguyver's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Pittsburgh, PA
Posts: 1,055
Liked 128 Times on 94 Posts
Likes Given: 10

Default

Also note that the dry hop can act as nucleation sites for the dissolved CO2 in your beer, so that will cause a little extra blanketing as well.

I've made both PTY and Kern River Citra this year (3-4 dry hop additions each) without adding bottled CO2, and I didn't have any problems. This is really more of a concern with longer term aging.



__________________

Brewguyver - the man who does everything wrong so you won't have to!

brewguyver is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fermenator??: HopSong General Beer Discussion 2 11-04-2011 05:54 AM
Fermenator!!!!! mcarb General Beer Discussion 1 07-21-2011 02:08 PM
to fermenator or not to fermenator axlrose16 General Techniques 3 02-13-2009 01:59 PM
Used 14.5 gal Fermenator Gabe Equipment/Sanitation 3 02-03-2008 01:39 PM
Just got my 14.5 Fermenator billtzk Equipment/Sanitation 21 01-06-2008 06:46 AM