The Great Bottle Opener Giveaway

Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > Bottle carbing a high-ABV brew with WLP500

Reply
 
LinkBack Thread Tools
Old 06-29-2013, 01:15 AM   #1
WineIsRed
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Posts: 37
Liked 1 Times on 1 Posts
Likes Given: 12

Default Bottle carbing a high-ABV brew with WLP500

Quick question for the hive:

I made an Austin Homebrew Rocheforte 10 clone kit – and went a tad over on the OG.

OG = 1.117

I used WLP500 with a huge starter...

after 4 weeks in primary, SG = 1.030

after 5 additional weeks in secondary (9 weeks total), I hit the suggested FG on the nose – 1.023

I just racked it again (to tertiary), to get it to clear a bit (WLP500 has poor floculation, so a couple rackings are usually necessary to get it to clear up (in my experience).

Sooooo... what are the chances that this will carb in the bottle? Depending on which formula you use, the ABV is between 12.3% and 14% (I believe the higher figure is more accurate).

I know I'm near the tipy-top of the alcohol tolerance for WLP500 (I've had good luck with it bottle carbing an 11.5% ABV brew in the past)....

Also – I'm in no hurry with this brew. I don't plan to even think about cracking a bottle for 6 months, and I expect the majority of it to sit for a year.

__________________
WineIsRed is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Newbie to Forum--Trouble Carbing High Gravity Brew Dave-Ed Bottling/Kegging 2 10-22-2012 11:53 AM
Bottle carbing at high temps? 80-90F will it add esters? befus General Beer Discussion 4 06-24-2012 01:24 AM
Really high ABV bottle carbing diverpat General Beer Discussion 3 01-31-2012 05:25 PM
High gravity and bottle carbing shauntraxler Fermentation & Yeast 2 04-23-2011 05:21 PM
High OG & Bottle Carbing? Rudeboy All Grain & Partial Mash Brewing 1 02-25-2008 08:13 PM