New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > On agitating the brew...?




Reply
 
LinkBack Thread Tools Display Modes
Old 04-24-2011, 10:43 PM   #1
Upship
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2011
Location: Del Rio, TX
Posts: 36
Default On agitating the brew...?

I'm curious, mostly worried haha, but is it alright, a good, or bad idea to continue to agitate the brew during primary fermentation?



__________________
Upship is offline
 
Reply With Quote Quick reply to this message
Old 04-24-2011, 10:52 PM   #2
Yooper
Ale's What Cures You!
HBT_ADMIN.png
Feedback Score: 0 reviews
 
Yooper's Avatar
Recipes 
 
Join Date: Jun 2006
Location: Upper Michigan
Posts: 58,722
Liked 3874 Times on 2829 Posts
Likes Given: 648

Default

It's a bad idea. You want to avoid oxidation once fermentation starts. After fermentation is winding down, you want the suspended proteins to fall and agitating the fermenter will work agaist both of those goals.

The only way I could see doing it is if you were using a highly flocculant yeast, and the yeast flocculated out before fermentation was finished. Perhaps a gentle swirl could encourage the yeast to finish up. I've never needed to do that, though, in nearly 300 batches of beer.



__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006
Yooper is offline
 
Reply With Quote Quick reply to this message
Old 04-25-2011, 12:59 AM   #3
Upship
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2011
Location: Del Rio, TX
Posts: 36
Default

Got it. Well time to fess up then. It's day four of fermentation and I agitated it a bit yesterday. A little more than a "light" swirl but about that. What's the damage likely to be if I leave well enough alone from here on out?

__________________
Upship is offline
 
Reply With Quote Quick reply to this message
Old 04-25-2011, 01:24 AM   #4
Pezman1
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Coppell, TX
Posts: 471
Liked 15 Times on 15 Posts
Likes Given: 2

Default

If the airlock was in place and functioning and you "agitated" the beer a bit during active fermentation, you are fine.

If you are taking off the airlock and agititating the beer then bad things can happen exactly like Yooper said. The only way to tell is to taste the beer when you are done.

My guess is that you will be O.K. Pez.

__________________
Pezman1 is offline
 
Reply With Quote Quick reply to this message
Old 04-25-2011, 05:31 AM   #5
Upship
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2011
Location: Del Rio, TX
Posts: 36
Default

Whew! Nope, left the airlock on. So what is the risk, in any, of oxidation/contamination when I take samples to check the SG?

__________________
Upship is offline
 
Reply With Quote Quick reply to this message
Old 04-25-2011, 07:35 PM   #6
Pezman1
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Coppell, TX
Posts: 471
Liked 15 Times on 15 Posts
Likes Given: 2

Default

Quote:
Originally Posted by Upship View Post
Whew! Nope, left the airlock on. So what is the risk, in any, of oxidation/contamination when I take samples to check the SG?
Very little. Just be carefull not to splash the beer around much, be diligent with cleaning and sanitizing, and drink your sample instead of returning it to primary.

Make sure you wait two or three weeks before trying to take a FG. No reason to take sample after sample after sample.

I don't even try an FG untill all signs of active fermentation have passed, the krausen has fallen back into the beer, and at least three weeks have gone by.
Pez.
__________________
Pezman1 is offline
 
Reply With Quote Quick reply to this message
Old 04-25-2011, 09:59 PM   #7
ShermanTank
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Arlington, VA, Virginia
Posts: 60
Liked 1 Times on 1 Posts
Likes Given: 2

Default

Funny, I was just going to post about this topic today. I do this from time to time. I give the primary a few "swirls" but never splash the beer. I find it results in a bit of air lock action for about 24 hours. I was also wondering others opinions; however, I've yet to experience any down side to doing this activity.

__________________

Primary: Fountain of Truth Imperial IPA
Secondary: None
Kegged: Scotch Ale; Northern Brewer's Golden Dragon Belgian Special Ale; Ends in Day IPA
Bottles: Summer Ale; Rogue Brutal IPA; Black IPA; English Barleywine; Imperial IPA
Up Next: AG Irish Red or Oktoberfest
This is a Full-On Obsession now!

ShermanTank is offline
 
Reply With Quote Quick reply to this message
Old 04-25-2011, 10:57 PM   #8
jtakacs
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Santa Rosa, CA
Posts: 742
Liked 15 Times on 15 Posts
Likes Given: 1

Default

from my experience the airlock activity is from embedded CO2 rising up from the trub/yeast - i wouldn't worry about oxidation as its covered in CO2 presumably, but why bother to swirl it unless you had to? that being said, i do kick my beers on occasion. mostly out of frustration that they're not in a bottle yet.



__________________
jtakacs is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes