Cazamodo

Recipes 

Im in the UK and cannot find anything that resembles tap handle inserts. I've ordered two different things that have been suggested that I can get in the UK and none are of use.

The tap handle inserts that I've seen used in a number of handle threads, are impossible to find over here!

Would it cost way too much to post these to the UK?

Kahler

Recipes 

Check midwestsupplies.com.
They should be too expensive, they are very small

Golddiggie

Recipes 

In the US, the tap handle threads are 3/8"-16. I believe the taps sold overseas are a different thread (diameter and count). If possible, take one to the hardware store and find a nut that will work on it. You now know the thread size/count you need for inserts. IF it is 3/8"-16, I have some of the brass ones that are 'spares'. If they're a different thread, then you could just get the nuts that match and get them either ground round, or put on a lathe and turned. Use some good glue (two part epoxy would be my choice) and glue them into what you want to use.

PM me if you need the 3/8"-16 inserts.

__________________
My RocketHub Project

Hopping Tango Brewery

跟猴子比丟屎 ・ Gun HOE-tze bee DIO-se

On Tap: Caramel Ale, Mocha Porter II, MO SMaSH IPA
Waiting/Carbonating: 12.5% Wee Honey II, 8.9% Old Ale, English Brown Ale, Lickah ESB, Mocha Porter II
Fermenting
K1: MO SMaSH IPA
K2:
K3: TripSix
On Deck: Caramel Ale
Aging:mead
Mead [bottled]:Oaked Wildflower Traditional, Mocha Madness, Blackberry Melomel, maple wine


...the right of the People to keep and bear arms shall not be infringed

marcb

Recipes 

Let me know what you need, I'm happy to send them.

45_70sharps

Recipes 

Buy me a round trip ticket and I'll get her figured out for you!
We can see about drinking a few gallons while I'm there also.

I think golddiggie is right. Yours is probably a metric version close to what they are over here. Taking a faucet to the hardware store and figuring out the thread size is what I would do.

__________________
Let's see if I keep this updated!

On tap
Black Butte clone

In secondary
Pumpkin ale

In primary
Honey wit

Up next.. Firestone Union Jack clone

Cazamodo

Recipes 

That's the problem, I took one to the shop but couldn't find anything that fit, as they. Are perlick525's ordered from the US!

Golddiggie

Recipes 

Then you need the 3/8"-16 threaded items... How many do you need? If you can order from online US vendors, might be easier to just do that. If not, there's a couple of us that posted as having spares. Depending on how many you need that is. I'd want the cost of shipping sent to me for this, so that I'm not going into the negatives.

__________________
My RocketHub Project

Hopping Tango Brewery

跟猴子比丟屎 ・ Gun HOE-tze bee DIO-se

On Tap: Caramel Ale, Mocha Porter II, MO SMaSH IPA
Waiting/Carbonating: 12.5% Wee Honey II, 8.9% Old Ale, English Brown Ale, Lickah ESB, Mocha Porter II
Fermenting
K1: MO SMaSH IPA
K2:
K3: TripSix
On Deck: Caramel Ale
Aging:mead
Mead [bottled]:Oaked Wildflower Traditional, Mocha Madness, Blackberry Melomel, maple wine


...the right of the People to keep and bear arms shall not be infringed

Cazamodo

Recipes 

I'd gladly pay for shipping, if someone could let me know what it could be! I'm only. After 2. Well 3 so I have one spare!