Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brew Market > For Sale > For Sale - Silver Solder & Hole Flange Kit
Reply
 
LinkBack Thread Tools
Old 11-10-2012, 09:06 PM   #1
bheggeseth
Feedback Score: 1 reviews
Recipes 
 
Join Date: Jul 2011
Location: Sioux Falls, SD
Posts: 30
iTrader: (1)
Default For Sale - Silver Solder & Hole Flange Kit

I just got done soldering the fittings on my boil kettle and wont need the parts any more. I soldered 4 fittings and as you can see there is left plenty of solder left. The solder is a one pound spool of Stay Brite #8 in 1/8" size. This is the better grade of Stay Brite solder and the 1/8" size lets you place a ring of solder in the fitting and you simply heat from the bottom and the solder flows just perfect, included is the liquid flux. Also included is the stainless steel tapered fittings that are used to flare the holes. The bolt is a grade 8 bolt and the other pipe fittings are steel and are used to brace the bolt as you tighten the flaring tool. The stainless steel fittings will allow you to flare holes for 1" and 1.5" pipe. Last I am including some cutting oil. Again I only used enough for four holes. I am asking $125 plus shipping.

Thanks, Brad.

__________________
bheggeseth is offline
 
Reply With Quote Quick reply to this message
Old 11-11-2012, 06:37 AM   #2
DrPhilGood
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Staten island, NY
Posts: 131
iTrader: (0)
Liked 2 Times on 2 Posts

Default

What fittings were the holes for?

__________________
DrPhilGood is offline
 
Reply With Quote Quick reply to this message
Old 11-11-2012, 10:19 PM   #3
bheggeseth
Feedback Score: 1 reviews
Recipes 
 
Join Date: Jul 2011
Location: Sioux Falls, SD
Posts: 30
iTrader: (1)
Default

If you look at the above picture there are 3 flared stainless steel fittings lined up in the front row. The first fitting on the left is a 1/2" to 3/4" and is used to flare out a hole for a 1" solder joint. Note you need to stop pulling the fitting short of all the way. I drilled the hole in the keg at 7/8" and pulled the flare tool until it measured exactly 1".

The middle fitting is a 1" to 1.25" fitting and is used to flare out a hole for a 1.5" solder joint. I did not need to use this fitting but again I would drill the hole to 1 3/8" and pull the flare tool until the hole measures exactly 1.5".

The fitting on the right is a 3/4" to 1.75" fitting and could be used to flare a hole up to 1 7/8" in size.

I used tri-clover ferrules from brewershardware.

Thanks, Brad.

__________________
bheggeseth is offline
 
Reply With Quote Quick reply to this message
Old 11-12-2012, 03:37 AM   #4
DrPhilGood
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Staten island, NY
Posts: 131
iTrader: (0)
Liked 2 Times on 2 Posts

Default

Did you fit a heating element in the 1.5 " ferrule? Looking to do similar work

__________________
DrPhilGood is offline
 
Reply With Quote Quick reply to this message
Old 11-12-2012, 12:46 PM   #5
mosstradamus
Feedback Score: 1 reviews
Recipes 
 
Join Date: Feb 2012
Location: Arlington, VA
Posts: 31
iTrader: (1)
Liked 3 Times on 2 Posts

Default PM Sent

PM Sent

__________________
mosstradamus is offline
 
Reply With Quote Quick reply to this message
Old 11-12-2012, 05:30 PM   #6
bheggeseth
Feedback Score: 1 reviews
Recipes 
 
Join Date: Jul 2011
Location: Sioux Falls, SD
Posts: 30
iTrader: (1)
Default

Yes you can get a heating element to fit through a 1.5" ferrule. If you look I will be soon posting a sale for just the parts you will need.

Thanks, Brad.

__________________
bheggeseth is offline
 
Reply With Quote Quick reply to this message
Old 11-14-2012, 12:37 AM   #7
Dert
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Mpls, Mn
Posts: 93
iTrader: (0)
Liked 14 Times on 10 Posts
Likes Given: 1

Default

$100 for the solder...here:

http://www.amazon.com/gp/aw/d/B001HW...dir_mdp_mobile

If I needed it this would be a good deal.

__________________
Dert is offline
 
Reply With Quote Quick reply to this message
Old 11-14-2012, 02:29 AM   #8
bheggeseth
Feedback Score: 1 reviews
Recipes 
 
Join Date: Jul 2011
Location: Sioux Falls, SD
Posts: 30
iTrader: (1)
Default

Sold

__________________
bheggeseth is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
silver solder thach1aj DIY Projects 3 10-18-2012 12:34 PM
For Sale - Silver solder and liquid flux mux For Sale 3 03-29-2012 03:06 PM
Silver Solder in/for Fermenter? outside92129 DIY Projects 3 07-07-2011 03:52 PM
Solder Flange of element? burbelly Electric Brewing 10 05-02-2011 06:05 PM
How much silver solder do I need? Bugaboo DIY Projects 5 01-19-2011 08:35 PM