Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   For Sale (http://www.homebrewtalk.com/f16/)
-   -   Extra Keg /Keggles for Sale $150 (http://www.homebrewtalk.com/f16/extra-keg-keggles-sale-150-a-290086/)

ohararp 12-29-2011 03:22 AM

Extra Keg /Keggle (s) $150
 
4 Attachment(s)

I recently came in to a number of kegs in my attempts to build my homebrew single tier all-electric rig. I only needed three, but figured the additional kegs could be used for brewing by fellow homebrewers. I have 6 kegs remaining from various brands. On the keg you see here I have welded a single 1/2" FPT half-coupler in the top position for use with a dial temperature gauge. There is a full coupler in the bottom position that is used for draining. Since it is a full coupler you can mount both a valve on the outside and a dip tube or similar device on the inside. All the welds have been dimpled and sanitary welded using a TIG welder with argon purging (outside/inside). Of the 6 kegs this is the only one with couplers welded on it. If you have a particular location you would like the couplers welded I can put them there after payment. The top has been cut using a plasma cutter and compass jig to ensure roundness. The lid edges have been smoothed with an angle grinder and flapper wheel. Additional couplers/fittings can be welded for $20 per fitting. Please contact via pm if you are interested or have any questions.


ohararp 12-29-2011 03:22 AM

Extra Keg /Keggle (s) $150
 
4 Attachment(s)

I recently came in to a number of kegs in my attempts to build my homebrew single tier all-electric rig. I only needed three, but figured the additional kegs could be used for brewing by fellow homebrewers. I have 6 kegs remaining from various brands. On the keg you see here I have welded a single 1/2" FPT half-coupler in the top position for use with a dial temperature gauge. There is a full coupler in the bottom position that is used for draining. Since it is a full coupler you can mount both a valve on the outside and a dip tube or similar device on the inside. All the welds have been dimpled and sanitary welded using a TIG welder with argon purging (outside/inside). Of the 6 kegs this is the only one with couplers welded on it. If you have a particular location you would like the couplers welded I can put them there after payment. The top has been cut using a plasma cutter and compass jig to ensure roundness. The lid edges have been smoothed with an angle grinder and flapper wheel. Additional couplers/fittings can be welded for $20 per fitting. Please contact via pm if you are interested or have any questions.


ohararp 12-29-2011 03:22 AM

Extra Keg /Keggle (s) $150
 
4 Attachment(s)

I recently came in to a number of kegs in my attempts to build my homebrew single tier all-electric rig. I only needed three, but figured the additional kegs could be used for brewing by fellow homebrewers. I have 6 kegs remaining from various brands. On the keg you see here I have welded a single 1/2" FPT half-coupler in the top position for use with a dial temperature gauge. There is a full coupler in the bottom position that is used for draining. Since it is a full coupler you can mount both a valve on the outside and a dip tube or similar device on the inside. All the welds have been dimpled and sanitary welded using a TIG welder with argon purging (outside/inside). Of the 6 kegs this is the only one with couplers welded on it. If you have a particular location you would like the couplers welded I can put them there after payment. The top has been cut using a plasma cutter and compass jig to ensure roundness. The lid edges have been smoothed with an angle grinder and flapper wheel. Additional couplers/fittings can be welded for $20 per fitting. Please contact via pm if you are interested or have any questions.


ohararp 12-29-2011 03:22 AM

Extra Keg /Keggle (s) $150
 
4 Attachment(s)

I recently came in to a number of kegs in my attempts to build my homebrew single tier all-electric rig. I only needed three, but figured the additional kegs could be used for brewing by fellow homebrewers. I have 6 kegs remaining from various brands. On the keg you see here I have welded a single 1/2" FPT half-coupler in the top position for use with a dial temperature gauge. There is a full coupler in the bottom position that is used for draining. Since it is a full coupler you can mount both a valve on the outside and a dip tube or similar device on the inside. All the welds have been dimpled and sanitary welded using a TIG welder with argon purging (outside/inside). Of the 6 kegs this is the only one with couplers welded on it. If you have a particular location you would like the couplers welded I can put them there after payment. The top has been cut using a plasma cutter and compass jig to ensure roundness. The lid edges have been smoothed with an angle grinder and flapper wheel. Additional couplers/fittings can be welded for $20 per fitting. Please contact via pm if you are interested or have any questions.



All times are GMT. The time now is 09:57 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.