Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   For Sale (http://www.homebrewtalk.com/f16/)
-   -   Brewing stuff. ( mostly controls,valves and electrical ) (http://www.homebrewtalk.com/f16/brewing-stuff-mostly-controls-valves-electrical-267472/)

wired247 09-08-2011 03:25 AM

Brewing stuff. ( mostly controls,valves and electrical )
 
Selling some stuff I overbought or have had laying around for a bit that I am unlikely to use.

1" SS ball valve. Heavy duty to say the least . 2 available Triclover flanges. $30 plus $5 shipping ONE SOLD ONE LEFT

1 1/2" Butterfly valve with variable position locking handle 316 SS $35 plus $5 shipping

Medical O2 bottle . New and never filled. M6 with 2016 hydrotest cert. $25 plus $5 shipping. I just ask my doctor and they'll give a scrip no problem. regulators are cheap on ebay. SOLD

1" SS check valve. standard 1 1/2" TC fittings. Never used . $50 plus $5 shipping.

Ashcroft 3" dial temperature gauge with 3" probe. 0-400F degrees. Has been zeroed and calibrated. Little use. $20 plus $5 shipping SOLD

Ashcroft variable position temp gauge. 8" probe . -20 to 130 F degree range. $20 plus $5 shipping. Lightly used and calibrated.

Solo 4848 temperature controllers from automation direct. PID or on/off . Nice units that retail for $100 each. adjustable for damn near everything imaginable. $50 plus $5 shipping on one without the RTD probe. $55 plus $5 shipping on the other with RTD probe and fitting for 1/2" NPT. SOLD

Spiral diffuser from spray systems . I use them for mashing and they work fantastic for vorlauf/ recirc . See discussion here about these. I have 3. $40 each shipped ONE SOLD TWO SPF

http://www.homebrewtalk.com/f11/spiral-diffuser-recirc-sparge-260321/

For the experimenter a PWM controller, heat sink and solid state relay 25 amps to run an 110 V AC device off the DC controller. $20 plus $5 shipping and I'll throw in a 12VDC power source. SOLD

J Type thermocouple in a blast proof housing. Never used. 1/2 NPT 6 inch "shaft" $25 plus $5 shipping. SOLD

Cast iron burner. 100 K BTU. $10 plus $10 shipping. Its heavy.

Octal base and AB 110VAC relay $20 plus $5 shipping. SOLD

Turkey fryer 7 gallon mash kettle/lauter for the beginning AG brewer. has bazooka screen and ashcroft 0-250F gauge and 1/2" ball valve. Makes good beer. $40 plus shipping.SOLD

Will combine shipping to actual shipping cost. Please email at shrkattk@gmail.com. I don't have the premo membership here so if you PM me it will fill my box up and bounce. All is available for FTF transaction in Northern Oregon. Paypal preferred but not vital.




http://img84.imageshack.us/img84/679...0907194600.jpg
http://img62.imageshack.us/img62/661...0801205050.jpg
http://img33.imageshack.us/img33/935...0907195117.jpg
http://img571.imageshack.us/img571/3503/cimg1361yo.jpg

Ma23456 09-08-2011 04:03 AM

Shipping on the turkey fryer to 26505?

bigbeergeek 09-08-2011 04:08 AM

I am a moron? :D

wired247 09-08-2011 04:15 AM

Quote:

Originally Posted by bigbeergeek (Post 3237910)
There is a classifieds section...


Thats where this is posted

wired247 09-08-2011 04:22 AM

Quote:

Originally Posted by Ma23456 (Post 3237896)
Shipping on the turkey fryer to 26505?

$15 Conus. Probably more than that but i'll eat the rest. SOLD

Marquez 09-08-2011 04:36 AM

PM sent on the
Ashcroft 3" dial temperature gauge with 3" probe. 0-400F degrees.

Thanks!

JonW 09-08-2011 04:38 AM

Interested in the PWM controller. Do you have a link for info on it?

wired247 09-08-2011 04:48 AM

Quote:

Originally Posted by JonW (Post 3238006)
Interested in the PWM controller. Do you have a link for info on it?


Its your basic chinese PWM controller with a 25 amp 12VDC control power relay and heat sink.

http://www.suntekstore.com/12v__40v-10a-pwm-dc-motor-speed-controller-w||-knob.html

JonW 09-08-2011 04:55 AM

Quote:

Originally Posted by wired247 (Post 3238029)
Its your basic chinese PWM controller with a 25 amp 12VDC control power relay and heat sink.

http://www.suntekstore.com/12v__40v-10a-pwm-dc-motor-speed-controller-w||-knob.html

Thanks. That won't work for me. I need variable freq (for a non-brewing project).

EFaden 09-08-2011 11:26 AM

pm sent.


All times are GMT. The time now is 09:30 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.