Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   For Sale (http://www.homebrewtalk.com/f16/)
-   -   60QT Boil Pot $61 at Home Depot in Seattle area (http://www.homebrewtalk.com/f16/60qt-boil-pot-61-home-depot-seattle-area-199885/)

bfeucht 10-09-2010 11:29 PM

60QT Boil Pot $61 at Home Depot in Seattle area
 
At two Home Depots in the Seattle area I have seen Brinkmanns aluminum 60QT Boiling Pot on sale for $61 which is half off normal price. I figured I would share as it seems like a good price for a HLT or mashtun.

Here is the link to the Home Depot item
http://www.homedepot.com/webapp/wcs/...44&marketID=44

ChshreCat 10-10-2010 03:42 AM

Showing up as $113 on the website, even if I switch my store to Seattle. I'll have to stop tomorrow in person and see...

bfeucht 10-10-2010 05:17 PM

I found them at this price at the Tukwila and West Seattle HDs

dtfeld 10-31-2010 03:15 AM

I bought a 60 Qt Brinkmann Aluminum pot in Woodstock Georgia today for $39.00. Originally marked at $113.00 Might go buy another just in case I want to do a really big low country boil or screw this one up.

JeffB 10-31-2010 03:57 AM

$39 here in Fresno today as well. They are really wide and short though. I didnt buy it, thinking it may be too short.

dtfeld 11-01-2010 01:32 AM

I don't like it for a BK, but may be my upgrade for the HLT. My current HLT is a 10 Rubbermaid cooler. This might give me the additional water so I don't have to refill it after mash in.

It is a pretty nice Al pot and is fairly robust.

bfeucht 11-01-2010 03:38 AM

I'm doing the same with mine. I have a taller 15 gallon SS BK already, but this will work great for a new HLT.

JeffB 11-01-2010 03:50 AM

I bought it today and did a 5 gallon batch in it (couldnt resist the price). It boiled up fast! Im liking the extra surface area on the bottom due to its big footprint. It holds all the flame from the burner on the pot.

Any leads on where to get bulkhead fittings for a drain valve for this? I looked at the Depot but didnt see anything.

dtfeld 11-01-2010 05:07 PM

Quote:

Originally Posted by JeffB (Post 2375198)
I bought it today and did a 5 gallon batch in it (couldnt resist the price). It boiled up fast! Im liking the extra surface area on the bottom due to its big footprint. It holds all the flame from the burner on the pot.

Any leads on where to get bulkhead fittings for a drain valve for this? I looked at the Depot but didnt see anything.

www.bargainfittings.com. I usually receive within 2 days of order, very helpful, good service.

JeffB 11-01-2010 06:34 PM

Thanks!


All times are GMT. The time now is 02:49 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.