Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > General Beer Discussion > rapidly chilling wort samples

Reply
 
LinkBack Thread Tools
Old 01-23-2009, 07:18 PM   #1
baldbrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2007
Location: aurora, il
Posts: 24
Default rapidly chilling wort samples

when i need a sample, i need it now.
this whole waiting 30 minutes for the stuff to cool in the freezer is bugging me


when you are talking gravity readings, how do you rapidly cool down 90-95mls of wort?

i have a hydrometer and refractometer
i normally use my refract before fermentation and hydrometer during fermentation

thoughts?

thanks in advance

__________________

primary
orange blossom semi sweet mead
semi-sweet varietal mead
wee heavy scottish ale

secondary
...

Bottled/Carbonating
Sit n Spin

Finished, and consumed/consuming:
Plain Ol' Robust Porter (yum)
Continental Pilsner - we call it Pam Adamson (boozy)
Irish Red Ale (meh)
Robust Uncle Bus Porter (vanilla)
Sit n Spin imperial stout (8.7% and oil can dark!)
Ordinary Bitter Bitters
Ball Cap American Light Ale
Frieder IPA (flat flat flat)

baldbrew is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2009, 08:01 PM   #2
ifishsum
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Portland OR
Posts: 1,457
Liked 7 Times on 7 Posts

Default

Some kind of cold water bath will cool it a lot faster than the fridge/freezer.

__________________
"If you're gonna be an ape, be a hairy one" - Spyder

Primary 2: Edwort's Robust Porter
Secondary 1: LW Pale Ale
Secondary 1: Blackened Soul RIS
Kegged: Dead Guy Ale
Kegged: Rye Pale Ale
Kegged: Haus Pale Ale
Kegged: Nut Brown Ale
Kegged: Afrikan Amber
Kegged: Jock Scott Ale
Kegged: Afrikan Amber
ifishsum is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2009, 08:03 PM   #3
Beerthoven
Feedback Score: 0 reviews
 
Beerthoven's Avatar
Recipes 
 
Join Date: May 2007
Location: Cary, NC
Posts: 2,175
Liked 11 Times on 10 Posts
Likes Given: 2

Default

Pour your sample into a 9" metal pie tin and swirl it around a few times. The large surface area will quickly cool your sample. For even faster cooling, put the pie tin in the freezer for several minutes beforehand.

__________________

Primary/Secondary: #109 Rye, #110 APA

Kegged: #106 American Wheat, #107 IPA, #108 Nut Brown

Planned: Red IPA, American Brown

Beerthoven is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2009, 08:04 PM   #4
eriktlupus
Feedback Score: 0 reviews
 
eriktlupus's Avatar
Recipes 
 
Join Date: Jan 2007
Location: Cereal City, USA
Posts: 2,648
Liked 9 Times on 7 Posts

Default

i have a directional spout on my kitchen sink and set the sample tube under a cold water trickle to cool under 130 then take the reading and adjust for temp in beersmith

__________________

primary1 :UTOPIA BABY(still searching for it)
secondary:middling bastard ipa
kegged:simcoe blonde, crystal pale ale, yellow jacket golden ale, lemon shandy blonde
DRINKIN DAWG BREWERY
LET'S GO RED WINGS


join michigan mashers here

extraction calculator
grains in pounds(G) X 36(average points per gallon of grains) / batch size in gallons(g) = maximum efficiency(ME)
OG / ME = brewhouse efficiency

eriktlupus is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2009, 08:05 PM   #5
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Revvy's Avatar
Recipes 
 
Join Date: Dec 2007
Location: "Detroitish" Michigan
Posts: 40,803
Liked 2709 Times on 1628 Posts
Likes Given: 3483

Default

I've never felt the need to stress about the preboil grav immediately...I stick it in the fridge, and start my boil and usually around a half hour I check it..That's about the only time I'm dealing with a truly hot sample...But if I really felt the need I would set my test jar in the water bath.

__________________

Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

Revvy is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2009, 08:15 PM   #6
remilard
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Kansas City
Posts: 3,655
Liked 38 Times on 37 Posts

Default

You don't need to cool it for the refractometer. The amount you need is so small it will reach the temp of the refractometer immediately. Usually when I get inside with the little sample I take (using the dropper thing that came with it) it has already cooled down quite a bit). If your refractometer is not ATC then IT needs to be at 68 F or whatever but the sample does not need to be.

__________________
remilard is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2009, 08:42 PM   #7
RichVT
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Tunbridge, VT
Posts: 10
Default

I constantly test the gravity of my wort as I run it off so I can stop when the gravity of the runnings get to 1.008. I just use my hydrometer and take the reading without cooling. I check the temp of the wort, read the hydrometer, and plug the info into Brew Smith. There is a tool in the software that adjusts your actual reading based on the temp of the wort, to what it would be if the wort were 60 degrees.

__________________
RichVT is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2009, 09:57 PM   #8
newrbrewer
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2008
Posts: 30
Default

I put my sample in my Erlenmeyer flask and swirl it in a ice water bath. Takes a couple of minutes max down to 60f.

__________________
On Tap:
BVIP
Ed's Haus Pale Ale
On Deck:
IPA
Fermenting:
Centennial Blonde
Aging:
Ed Worts Apfelwine - Kegged 9/10/2008
newrbrewer is offline
 
Reply With Quote Quick reply to this message
Old 01-25-2009, 01:49 AM   #9
Haterade
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2008
Posts: 81
Liked 2 Times on 2 Posts
Likes Given: 1

Default

I use a turkey baster to grab some of mine and put it in a small cup. Its just barely smaller than the drain in the sink so I run the cold water and it's pretty cool in under 5 min. I run my probe thermometer right into the wort sample while I'm letting it settle and plug both values into beersmith...

__________________
Haterade is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Chilling wort without wort chiller. Moun10 General Techniques 46 08-11-2012 02:37 AM
How to chill wort samples ohad General Techniques 5 10-19-2009 01:16 PM
Rapidly Cooling Wort TGreen588 General Techniques 7 01-08-2009 05:02 PM
Chilling the Wort rapidly Towers Beginners Beer Brewing Forum 12 01-02-2008 08:00 PM
Chilling my first wort.. waskelton4 Equipment/Sanitation 9 04-20-2006 11:54 AM