Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > General Beer Discussion > Filtering?
Reply
 
LinkBack Thread Tools
Old 12-16-2011, 01:13 AM   #1
ssiem37
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Charlottesville, va
Posts: 12
Default Filtering?

Does anyone run their beer through a filter of any sort when transferring from carboy to bottling bucket to bottle/keg?

Wondering if I could reduce sediment by using a filter/strainer. Just curious if anyone does and if so what?

__________________
ssiem37 is offline
 
Reply With Quote Quick reply to this message
Old 12-16-2011, 01:16 AM   #2
passedpawn
Waste Allocation Load Lifter - Earth Class
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
passedpawn's Avatar
Recipes 
 
Join Date: Apr 2009
Location: ☼ Clearwater, FL ☼
Posts: 18,816
Liked 3283 Times on 2046 Posts
Likes Given: 2802

Default

I have started using a plate filter. I siphon beer into a cornie, then use gas to push the beer from the 1st cornie, through the plate filter, to the second corner. My fist try was this past weekend, on an altbier and a IPA. My neighbor noticed right away and commented without me saying anything. It does make a very clear beer.

__________________
Hey goomba I love how you dance the rumba
But take some advice paisano learn-a how to mambo
If you're gonna be a square you ain't-a gonna go anywhere.
passedpawn is offline
 
Reply With Quote Quick reply to this message
Old 12-16-2011, 02:47 AM   #3
Zamial
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2010
Location: WI
Posts: 3,181
Liked 168 Times on 149 Posts
Likes Given: 7

Default

I now filter pretty much every beer through a 5 micron filter. This will leave plenty of yeast if I choose to bottle prime/condition or if I want I can still move it straight to a keg and have minimal "chunks".

I will filter some beers through a 1 micron filter that are supposed to be clear like a pale as example. This filter will strip out most of the yeast but not all of it. I would probably want to add yeast if I were to bottle it. Mind you, I seldom use this filter.

Last is the .5 micron which strips all the yeast and will even take sugars out. I will only use this for a pilsen or like style beer. I rarely use this filter because I do not brew much of this style to date.

IMO there is something to be said for the beers that go through a 1 micron or smaller filter. You start to strip out flavor. Not to mention those good for you B vitamins that aid in the lack of/recovery from hangovers... I personally never send beer through any filter unless I needed to.

__________________
“I'm not drunk, I'm from Wisconsin.”
We have been out drinking your state since 1848!
Zamial is offline
 
Reply With Quote Quick reply to this message
Old 12-16-2011, 03:12 AM   #4
Calder
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Ohio
Posts: 5,435
Liked 244 Times on 217 Posts
Likes Given: 2

Default

Quote:
Originally Posted by ssiem37 View Post
Does anyone run their beer through a filter of any sort when transferring from carboy to bottling bucket to bottle/keg?

Wondering if I could reduce sediment by using a filter/strainer. Just curious if anyone does and if so what?
Have not found a need. Time will clear most beers. Occasionally I get one that does not clear, and use it to learn.
__________________
Calder is offline
 
Reply With Quote Quick reply to this message
Old 12-16-2011, 03:34 AM   #5
jonmohno
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: Corn, High Fructose Corn Fortress, IA
Posts: 5,824
Liked 410 Times on 361 Posts
Likes Given: 1193

Default

Beware! I have done this with a small piece of nylon around my autoshiphon,because i dry hopped with loose pelllot hops, they were still floating in suspension when i filltered so i rubberbanded a nylon cutting well halfway through it bubbled it bad maybe it was clogging, but i was worried about 0xidation, long story short, drinking them over 8months old ocassionlly they still taste good!

__________________
jonmohno is offline
 
Reply With Quote Quick reply to this message
Old 12-16-2011, 04:33 AM   #6
DrewBrewTheGreat
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: jacksonville, Florida
Posts: 177
Liked 2 Times on 2 Posts

Default

Best advice: Brew more beer--> so finished beers are waiting for you to drink them-->rather than, you waiting for the beer to finish.

Breweries filter and rush beers because beer in fermenters and conditioning tanks does not make them money (small profit margins--cost effective to spend money on filtering beer and sell more beer, more quickly). Also because it makes beers more consistent in flavor.

Homebrewers, imo, can make better beers by not rushing things. And consistency does not matter to us (whether achieved or not). As stated above-->

Quote:
Time will clear most beers.
Not only will time (and gravity) clear the beer, but it will allow the beer to condition naturally at its own pace. I have used all sorts of filters and finings before--and they work--but I think the best method is simply to buy a few more corny kegs or bottles and brew more....
__________________
DrewBrewTheGreat is offline
 
Reply With Quote Quick reply to this message
Old 12-16-2011, 10:29 AM   #7
Calichusetts
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Calichusetts's Avatar
Recipes 
 
Join Date: Nov 2011
Location: Plymouth, MA
Posts: 2,372
Liked 233 Times on 170 Posts
Likes Given: 637

Default

I am now filtering my beer twice before fermentation. I use pellets and like hoppy beers so I have a decent amount of junk in my wort to begin with. I put a large strainer on my chiller pot and a smaller strainer in it. Pour wort slowly...as first strainer clogs the beer will rise out of the first and into the second.

I do the same thing again for pouring into the fermenter, except the funnels below the strainers have a small screen in it. If it still gets too clogged I have to switch out the small strainer for another.

This is NOT a lot of work...just leave the strainers in a bucket of star san and it takes 2 seconds to put them in place.

A couple of observations: Before this, I would get a thin layer of sediment at the bottle of my bottles (16oz) now its a tiny ring around the edges. Also, my trub is considerable lower and tighter.

__________________
Calichusetts is offline
 
Reply With Quote Quick reply to this message
Old 12-16-2011, 09:01 PM   #8
Buna_Bere
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Boston, MA
Posts: 258
Liked 21 Times on 19 Posts
Likes Given: 3

Default

I just filtered my first batch with a 7 micron plate filter.



The one on the left was in the keg for about 10 weeks, the one on the right
was in the keg for 2 days. Same grain bill, besides the plate filtering the only
differences were the one on the left used wyeast 1764 and was dryhopped
with 2 oz of pellets, the one on the right used wyeast 1056 and was
dryhopped with 2 oz of whole cones.







It took about 30 mins to push around 5 gallons through the filter. I also
cold crashed at 29 degrees for 48 hours before filtering. I'm pretty happy
with the results.

__________________
Buna_Bere is offline
 
Reply With Quote Quick reply to this message
Old 12-16-2011, 09:34 PM   #9
passedpawn
Waste Allocation Load Lifter - Earth Class
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
passedpawn's Avatar
Recipes 
 
Join Date: Apr 2009
Location: ☼ Clearwater, FL ☼
Posts: 18,816
Liked 3283 Times on 2046 Posts
Likes Given: 2802

Default

Quote:
Originally Posted by Buna_Bere View Post
I just filtered my first batch with a 7 micron plate filter.
Great, compelling post.

BTW, leak-proof, right? WTF. They need to redesign that plate filter. I'm planning on putting keg lube on the gaskets next time.
__________________
Hey goomba I love how you dance the rumba
But take some advice paisano learn-a how to mambo
If you're gonna be a square you ain't-a gonna go anywhere.
passedpawn is offline
 
Reply With Quote Quick reply to this message
Old 12-16-2011, 10:23 PM   #10
Buna_Bere
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Boston, MA
Posts: 258
Liked 21 Times on 19 Posts
Likes Given: 3

Default

I tested it with water first and found a couple of small leaks, so I put hose clamps on every connection, that fixed it. The gaskets didn't leak at all. I'd recommend keeping the receiving keg cover open so the pressure doesn't build up.

__________________
Buna_Bere is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Filtering Hop Pellets? bh10 General Beer Discussion 8 03-27-2013 10:28 AM
Filtering? DamageCT General Beer Discussion 8 10-25-2011 05:09 PM
Filtering BilltownBandit General Beer Discussion 3 09-30-2011 03:15 AM
Straining/Filtering psemp4126 General Beer Discussion 6 07-13-2011 03:13 AM
Water Filtering Help TXANM General Beer Discussion 3 04-24-2010 06:29 AM