Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > General Beer Discussion > Don't remove your blowoff tube based on bubbles

Reply
 
LinkBack Thread Tools
Old 04-14-2011, 05:37 AM   #1
dancness
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Pennsauken, New Jersey
Posts: 142
Liked 3 Times on 3 Posts

Default Don't remove your blowoff tube based on bubbles

On Saturday I made a Belgian Tripel. It's fermenting with WY3787. I had a blowoff tube attached right after pitching. But once it stopped bubbling furiously (after 2 days) I assumed (wrongly) that the krausen had fallen. At that point none at all had come through the blowoff tube into the bucket. So I replaced the blowoff tube with an airlock. Bad move.

The krausen had actually risen. But I didn't check under the lid when I replaced the lock so I didn't realize it.

When I was at work today a bunch of foam erupted from my airlock. Luckily it did not clog and explode, but rather it got all over the top of the lid to my bucket, and some on the floor.

Anyway, what I learned here is NEVER replace your blowoff tube prematurely (heh that sounds funny). But seriously, leave it on until you are absolutely sure the high krausen is over.

__________________
dancness is offline
 
Reply With Quote Quick reply to this message
Old 04-14-2011, 06:20 AM   #2
milesvdustin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Pensacola, Florida
Posts: 631
Liked 11 Times on 11 Posts
Likes Given: 23

Default

That's one reason I like my better bottles so much. I can actually watch the krausen fall. Then I know its safe for the airlock. That, and watch the yeast zip around in clumps like they are having a party!

__________________
Quote:
Originally Posted by djsethall View Post
It's like a big hot douche for my brewery.
milesvdustin is offline
 
Reply With Quote Quick reply to this message
Old 04-14-2011, 12:00 PM   #3
beergolf
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
beergolf's Avatar
Recipes 
 
Join Date: Jan 2011
Location: collingswood, nj
Posts: 3,952
Liked 358 Times on 294 Posts
Likes Given: 109

Default

3787 is crazy yeast. I did a Belgian with that yeast and it blew off 3 times and bubbled away for 20 days before slowing down. It has been in the fermenter for almost 5 weeks now and looks great.

__________________
beergolf is offline
 
Reply With Quote Quick reply to this message
Old 04-14-2011, 01:24 PM   #4
shortyjacobs
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: Twin Cities, MN
Posts: 2,511
Liked 29 Times on 29 Posts
Likes Given: 3

Default

Yeah...I don't even use airlocks any more, unless I'm moving carboys around a whole lot. A blow off tube is a great airlock...I leave them on for 4+ weeks.

__________________
Itchy Dog Brewery.

(As of 10-24-2011)
Primary - Steppe 112 PA, 2x Monday RyePA
Aging - None :-(
On tap - Big Dog, Apfelwein, Steppe 112 PA

My invisible AG sculpture, with no actual sculpture and a tiny footprint.
My Kegerator goes offroading!
My Coors Home Draft dispenser for boating/beering on the go.
shortyjacobs is offline
 
Reply With Quote Quick reply to this message
Old 04-18-2011, 11:32 PM   #5
topend
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Wichita, Kansas
Posts: 116
Liked 1 Times on 1 Posts

Default

I've got a tripel with 3787, and it is raging away on day 3 in my 65 degree basement (the wort is at least 68). I used the blowoff tube with an airlock body method, and it clogged it up, the foam is so thick. I had to modify a blowoff tube to go directly into the lid of my 7.9 gallon fermenter and am crossing my fingers.

I've never experienced a fermentation this active. I hope all the foam blowoff while I've figured this out doesn't contaminate the batch.

__________________
topend is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Blowoff tube fail w/ pics two_hearted General Beer Discussion 6 03-11-2011 12:38 AM
Estimate primary time based on OG/ABV Naked_Eskimo General Beer Discussion 2 10-02-2010 04:34 PM
WLP565 based Saison - will it bottle condition? billvon General Beer Discussion 2 08-26-2010 11:30 AM
Clogging BlowOff Tube = HELP!!! hbhudy General Beer Discussion 5 01-18-2010 12:10 PM
My starter needs a blowoff tube...pic Q2XL General Beer Discussion 5 09-18-2009 03:29 PM