Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > General Beer Discussion > Do you take the temp of your starter?
Reply
 
LinkBack Thread Tools
Old 08-07-2012, 04:52 PM   #1
Gameface
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Gameface's Avatar
Recipes 
 
Join Date: Jul 2010
Location: Salt Lake City, UT
Posts: 1,140
Liked 204 Times on 132 Posts
Likes Given: 276

Default Do you take the temp of your starter?

I never check the temp on my starters. If it feels room temp I pitch the yeast.

Anything I should worry about if I pitch my starter at something like 80F? I figure the yeast are happy even at slightly higher temps and I dump the starter wort so I don't care too much about off flavors if there are any.

I make 2.5L-4L starters and use a stir plate.

Another question. I also don't aerate my wort with my pure O2 system. I don't really even shake it up. I figure that on the stir plate with the loose tin foil it'll get plenty of O2, but am I missing out by not hitting it with a big dose of O2 up front? I just haven't wanted to go through the hassle of sanitizing the O2 stone and all that for a starter.

__________________
Gameface is offline
 
Reply With Quote Quick reply to this message
Old 08-07-2012, 05:03 PM   #2
GNBRennes
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2012
Location: Green Bay, Wi
Posts: 40
Likes Given: 1

Default

I never checked my starters temp. As long as it seems cool enough it should be ok, but if its too warm it could cause foam overs from the yeast fermenting like crazy or kill them completely. I chill my starters in the kettle I boiled with. Once the kettle feels cool or room temp to the touch is when I transfer to my flask and add yeast.

If your using a stir plate you would not need to use your o2 system. Even without the stir plate you wouldn't need it, just shake a few times.

__________________
GNBRennes is offline
 
Reply With Quote Quick reply to this message
Old 08-07-2012, 05:07 PM   #3
kh54s10
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: Tiverton, Rhode Island
Posts: 6,723
Liked 609 Times on 516 Posts
Likes Given: 164

Default

Quote:
Originally Posted by Gameface View Post
I never check the temp on my starters. If it feels room temp I pitch the yeast.

Anything I should worry about if I pitch my starter at something like 80F? I figure the yeast are happy even at slightly higher temps and I dump the starter wort so I don't care too much about off flavors if there are any.

I make 2.5L-4L starters and use a stir plate.

Another question. I also don't aerate my wort with my pure O2 system. I don't really even shake it up. I figure that on the stir plate with the lose tin foil it'll get plenty of O2, but am I missing out by not hitting it with a big dose of O2 up front? I just haven't wanted to go through the hassle of sanitizing the O2 stone and all that for a starter.
I do check the temps but, only to be sure it is close to the temperature of the yeast.

2.5L -4L? you must be brewing some big beers!

I never aerate, I don't have the equipment. The starters work out well.
__________________
kh54s10 is offline
 
Reply With Quote Quick reply to this message
Old 08-07-2012, 05:09 PM   #4
Gameface
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Gameface's Avatar
Recipes 
 
Join Date: Jul 2010
Location: Salt Lake City, UT
Posts: 1,140
Liked 204 Times on 132 Posts
Likes Given: 276

Default

Quote:
Originally Posted by kh54s10 View Post
I do check the temps but, only to be sure it is close to the temperature of the yeast.

2.5L -4L? you must be brewing some big beers!

I never aerate, I don't have the equipment. The starters work out well.
I make 10g batches. I use beersmith to tell me how big a starter to make.
__________________
Gameface is offline
 
Reply With Quote Quick reply to this message
Old 08-07-2012, 05:23 PM   #5
TimpanogosSlim
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2012
Location: Orem, UT
Posts: 961
Liked 76 Times on 67 Posts
Likes Given: 5

Default

No. I assume that after spending a day on the stir plate, it has a temperature similar to it's surroundings.

__________________
TimpanogosSlim is offline
 
Reply With Quote Quick reply to this message
Old 08-07-2012, 05:43 PM   #6
Gameface
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Gameface's Avatar
Recipes 
 
Join Date: Jul 2010
Location: Salt Lake City, UT
Posts: 1,140
Liked 204 Times on 132 Posts
Likes Given: 276

Default

Quote:
Originally Posted by TimpanogosSlim View Post
No. I assume that after spending a day on the stir plate, it has a temperature similar to it's surroundings.
I'm talking about before pitching the yeast. Just wondered if I would do any damage if I pitched warm into the starter that would show up in the final beer. Didn't figure there would be, but thought it would be good to ask.
__________________
Gameface is offline
 
Reply With Quote Quick reply to this message
Old 08-07-2012, 06:10 PM   #7
TimpanogosSlim
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2012
Location: Orem, UT
Posts: 961
Liked 76 Times on 67 Posts
Likes Given: 5

Default

Well, it's best if the starter and the wort have similar temperatures - every yeast data sheet i have seen has said within 10 degrees - but i can guess what the temperature of the starter is. 'cause it's gonna be the same as ambient.

__________________
TimpanogosSlim is offline
 
Reply With Quote Quick reply to this message
Old 08-07-2012, 07:12 PM   #8
Denny
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2005
Location: Eugene OR
Posts: 4,270
Liked 433 Times on 326 Posts
Likes Given: 517

Default

I take my starters out of the fridge, decant, and pitch immediately. That keeps the yeast from consuming it's glycogen reserves as it warms up and gets me faster starters and healthier yeast.

__________________

Life begins at 60....1.060, that is!

www.dennybrew.com

http://www.experimentalbrew.com - the website for the book "Experimental Homebrewing"...coming Nov. 2014

Denny is offline
 
Reply With Quote Quick reply to this message
Old 08-07-2012, 07:21 PM   #9
Phunhog
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2008
Posts: 1,888
Liked 140 Times on 105 Posts
Likes Given: 68

Default

Quote:
Originally Posted by Denny View Post
I take my starters out of the fridge, decant, and pitch immediately. That keeps the yeast from consuming it's glycogen reserves as it warms up and gets me faster starters and healthier yeast.
Hmmmm. interesting... I do the same but I let the decanted starter warm up for a an hour or two before pitching. I thought I read that ideally you want your yeast to be within 10 degrees F. of your wort. The theory is that you don't want to "shock" the yeast with a wide temperature swing. It would be nice to just decant and pitch!
__________________

Check out my nanobrewery!
http://www.facebook.com/#!/pages/Two-Trees-Brewing-Co/102323289804018

Phunhog is offline
 
Reply With Quote Quick reply to this message
Old 08-07-2012, 07:22 PM   #10
Denny
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2005
Location: Eugene OR
Posts: 4,270
Liked 433 Times on 326 Posts
Likes Given: 517

Default

Quote:
Originally Posted by Phunhog View Post
Hmmmm. interesting... I do the same but I let the decanted starter warm up for a an hour or two before pitching. I thought I read that ideally you want your yeast to be within 10 degrees F. of your wort. The theory is that you don't want to "shock" the yeast with a wide temperature swing. It would be nice to just decant and pitch!
Yeast shock is a pretty old, disproven theory. As long as the yeast isn't warmer than the wort, it doesn't happen. Yeast colder than the wort works great.
__________________

Life begins at 60....1.060, that is!

www.dennybrew.com

http://www.experimentalbrew.com - the website for the book "Experimental Homebrewing"...coming Nov. 2014

Denny is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pilsner starter, Cold or room temp! 1stTimer General Beer Discussion 18 06-19-2012 08:11 PM
Starter Temp SoFlaBrewer General Beer Discussion 5 07-19-2010 08:53 PM
Pitching temp vs fermentation temp PavlovsCat General Beer Discussion 15 08-14-2009 02:09 AM
Max temp. for yeast mthompson General Beer Discussion 6 02-27-2009 03:10 PM
Starter Question / Will 1/2 gal of starter do two batches? JKHomebrew General Beer Discussion 4 01-28-2009 12:39 PM