Come enter the BrewHardware Giveaway!

Home Brew Forums > Home Brewing Beer > General Techniques > Primary Fermenting in a Corny Keg
LinkBack Thread Tools
Old 02-06-2013, 01:28 PM   #191
Feedback Score: 5 reviews
cyberbackpacker's Avatar
Join Date: Jul 2008
Location: Holland, Michigan
Posts: 1,505
Liked 16 Times on 15 Posts
Likes Given: 15


I've been fermenting this way for at least 4 years now, and I can say from my own brewing that attenuation has never been an issue. In addition when I first transitioned from bucket fermenters to kegs I brewed many of the same recipes I had done in the past, and there was no significant difference in attenuation between batches. Similarly, all of my ferments are temp controlled, and my process is standardized for yeast pitching and aeration. IOW, a fairly controlled set of parameters existed outside of the change in fermenting vessels.

Bottom line, perhaps the overall volume(5-6 gallons) and relatively minor decrease in size does not have as great of an impact in this scale; I am not disputing the science, but based on the equipment and observation techniques available to us outside of a well equipped lab, I feel very comfortable fermenting in kegs (originally corners but the last couple of years 1/6 barrel sankeys), and see no reason to scare people off from using them either.

There are many factors that can impact your fermentation, but fermenter size is not one I would concern myself with too much at this level- temp control, proper yeast pitching rates, and oxygenation of wort are the biggest factors I have experienced over the years. If those are dialed in and you notice a perceptible difference in your beer post fermentation, then maybe switch back to a bucket or carboy. I still believe though that even if you notice a measured difference in attenuation, the perception of the final beer is what matters.

My $0.02!



Trinke Das Bier Das Du Gebraut Hast

cyberbackpacker is offline
Reply With Quote Quick reply to this message
Old 02-07-2013, 12:57 PM   #192
Feedback Score: 0 reviews
oakbarn's Avatar
Join Date: Jun 2011
Location: Argyle, Texas
Posts: 738
Liked 51 Times on 40 Posts
Likes Given: 26


I have also sorta have done the same with Ales. We have a 14 Gallon Stout Conical and Carboys. When we brew a 15 gallon Batch, It will not all fit in the Stout Conical, so we have to use a carboy. We have them in the same room and I normally make a starter. We cannot tell the difference between that brewed in the Stout Conical or the Carboy and the FG is normally exactly the same.

Fermentation Size is a factor in brewing, but I do not think it has much effect in Home Brew vessels.

oakbarn is offline
Reply With Quote Quick reply to this message
Old 10-25-2013, 08:55 AM   #193
Feedback Score: 0 reviews
Join Date: Oct 2013
Posts: 1

Very good thread even if it is old, I learned a lot. I suppose I will try using corny kegs as primary and see what happens.

pipelastova is offline
Reply With Quote Quick reply to this message

Quick Reply
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Attenuation question - fermenting in corny Hugh_Jass Fermentation & Yeast 28 11-24-2012 03:48 PM
Fermenting in a corny Ryan_PA Equipment/Sanitation 11 08-05-2011 03:06 PM
Corny Keg as Primary Blue_Water General Techniques 12 12-27-2008 11:54 AM
Fermenting in a Corny? Ego Archive Wine Making Forum 6 09-27-2008 04:46 PM

Newest Threads