Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > General Techniques > Keg and carb question !!
Reply
 
LinkBack Thread Tools
Old 08-16-2012, 04:53 PM   #11
zeekage
HBT_LIFETIMESUPPORTER.png
Feedback Score: 7 reviews
Recipes 
 
Join Date: Jan 2011
Location: Boston, MA
Posts: 733
Liked 42 Times on 38 Posts
Likes Given: 2

Default

Quote:
Originally Posted by Gwitz View Post
My pipeline is such that i dont get around to my beers until they are at least a month old and at least 2-3 weeks cold conditioned. Thus i dont like to wait any longer and have perfected the shake the keg method. I hook my co2 line to the beer out side of the keg, it makes little bubbles at the bottom of the keg and helps alot with co2 absorption. I set my reg to 35-45 psi and rock it back and forth until i feel im pretty close to where i wanna be, always erring on the side of caution. Iv never rly timed how long this takes, and it really depends on the headspace inside the keg, less headspace takes longer to get the co2 into solution. But heres the trick, i turn the tank valve off and continue shaking. Once the reg has drained of pressure, the low side gauge will start going down as well, keep shaking until it stops going down and thats how much co2 you have in solution. I go until i get between 15 - 20. If you're below that, open the tank valve and shake some more. Im actually thinking of getting another pressure gauge and hooking it up to a gas in disconnect so all i have to do is close the regulator valve.

Haters of the shake the keg method will hate, but iv been doing it this way for 3 years and i have only once over carbed a beer and it wasnt a big deal.
This method also works well at your desired serving pressure. My kegs carb at 11-12PSI so i just hook up the gas and rock the keg back and forth at this pressure till i stop hearing bubbles. no chance of over-carbing this way. And also no messing with regulator pressure. I also hook it up to the gas in post (mismatched disconnects are always a royal pain to unhook for me) and when I rock the keg I just make sure the gas post is at the bottom. Same effect as using the beer out tube I think.
__________________
zeekage is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools