beesy

Recipes 

Just got done and have a little over 5 gal at 1.043 and want to get to 1.047. Ideas on how much light DME and H2O to use. Want H20 volume a little under 32 oz.
Thanks

FlyingHorse

Recipes 

If you're set on using 32 oz of water, then 11 oz DME in 32 oz water will get you up to 5.25 gal @ 1.047
No need to use that much water, unless you want it for some other reason. 8 oz of DME in enough water to dissolve will get you there too.

__________________
No signature required.

Yooper

Recipes 

About 1/2 pound in a little boiling water should get you close.

Edit- too slow!

__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

beesy

Recipes 

thankx guys. just want about 32 oz to get around 5.25 gallons so can fill a keg after primary and secondary. I fly sparge and did a repeat recipe, but went through vourlauf/sparge process at 2x speed experimenting on saving time and ended up a little on the light side of o.g. going to mix reponses at 10 LDME to 26 oz H2o and let it roll out!