Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > General Techniques > Frustrations in all grain brewing...

Reply
 
LinkBack Thread Tools
Old 02-11-2013, 11:15 PM   #11
Sonnyjim
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Sonnyjim's Avatar
Recipes 
 
Join Date: Jan 2009
Location: Madsen, Ontario
Posts: 124
Liked 12 Times on 7 Posts

Default

Beersmith 2.0. The first time we brewed with this software with all of the proper calculations put in, we were right on the button. It calculates absolutely everything you need to do. Just plug in the recipe and you'll have some answers. Well worth the money my friend.

__________________

"Homer no function beer well without."
- Homer Simpson

Sonnyjim is offline
 
Reply With Quote Quick reply to this message
Old 02-12-2013, 08:12 PM   #12
Catfish1320
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2012
Location: Scranton, Pennsylvania
Posts: 79
Liked 2 Times on 1 Posts
Likes Given: 1

Default

Beersmith is the best $29 I spent since getting back into brewing. Makes me feel like I almost know WTF Im doing..lol. It accounts for everything, and I have hit my #s each of the 3 times I have brewed with it, and those are my first 3 all grain batches.

__________________
Catfish1320 is offline
 
Reply With Quote Quick reply to this message
Old 02-12-2013, 08:26 PM   #13
tennesseean_87
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
tennesseean_87's Avatar
Recipes 
 
Join Date: Aug 2011
Location: Philly, PA
Posts: 1,180
Liked 84 Times on 60 Posts
Likes Given: 105

Default

You have a problem using too much sparge water/not boiling off enough. You may also have an efficiency problem (poor crush, perhaps). Fix the boil-off issue by using 1/2 gallon less water.

Have you calculated your efficiencies? Put everything in a recipe calculator and adjust the volume to what you got, then adjust efficiency until you hit the actual, measured SG. Do this for all your brews, then see if your efficiency is consistent. In the future you can adjust that before you make a recipe, so that you'll hit your numbers.

Also, don't feel bad. Unless you spill extract everywhere, it's impossible to miss your numbers with that method. With AG, there are variables, and it takes time to get things consistent. It took a few batches of milling my own grain to get the gap set and my system down, but after a few, I hit 85% pretty consistently (unless using wheat). For the wheat, I'm going to try milling it a bit finer to see if I can hit that same eff for all my batches. Press on!

tennesseean_87 is offline
 
Reply With Quote Quick reply to this message
Old 02-13-2013, 01:14 AM   #14
CaptMogul
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: Key West, FL
Posts: 15
Default

Get a stick and measure how much wort you need in kettle. I use 13 gal for a 10.5 gal batch less boil off. Not to hard to figure with a stick

__________________
CaptMogul is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
All grain frustrations thomasgorff All Grain & Partial Mash Brewing 12 02-16-2012 12:20 PM
Frustrations scottland General Beer Discussion 6 12-10-2011 11:54 PM
Frustrations tonyolympia All Grain & Partial Mash Brewing 2 09-10-2011 09:02 PM
Frustrations BugleBrew All Grain & Partial Mash Brewing 11 11-30-2008 04:48 PM
First Trimester Frustrations.. aekdbbop General Chit Chat 20 09-09-2008 02:51 AM