Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > General Techniques > Filtering from secondary to bottling bucket

Reply
 
LinkBack Thread Tools
Old 04-21-2012, 02:52 PM   #1
rfoneill
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Hamburg, NY
Posts: 14
Liked 1 Times on 1 Posts
Likes Given: 8

Default Filtering from secondary to bottling bucket

I brewed a Blueberry Ale and there is still bits and pieces of blueberry in the secondary. What can I do to filter these particles out when transferring to the bottling bucket as I don't want any of this in the bottles.

__________________
rfoneill is offline
 
Reply With Quote Quick reply to this message
Old 04-21-2012, 02:56 PM   #2
SilverZero
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Bend, OR
Posts: 684
Liked 30 Times on 24 Posts
Likes Given: 39

Default

You could put a grain bag over the end of your racking cane (the end that goes into the secondary). I've done that when I've been transferring out of a dry-hop carboy (although it's difficult to get it into the carboy if it's a larger one). You could probably manufacture something similar that has less overall mass and zip-tie it to the racking cane or something.

Failing that, you could rack over a strainer into your bottling bucket. I've done that as well, just be careful to get the stream going down the side of the bucket to avoid (being ridiculed for risking) oxidation during the transfer.

__________________
SilverZero is offline
rfoneill Likes This 
Reply With Quote Quick reply to this message
Old 04-21-2012, 02:59 PM   #3
Varmintman
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2012
Location: idaho falls, idaho
Posts: 2,087
Liked 651 Times on 408 Posts
Likes Given: 820

Default

Depending how much is in there floating around I have used a hop sock tied to the end of my hose in the bottling bucket. You need to be very careful though not to get air in the beer or it will taste bad.

And while some here do not advocate it I gently stir after it is in the bucket to thoroughly mix the sugar in.

__________________
Varmintman is offline
rfoneill Likes This 
Reply With Quote Quick reply to this message
Old 04-21-2012, 03:05 PM   #4
SilverZero
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Bend, OR
Posts: 684
Liked 30 Times on 24 Posts
Likes Given: 39

Default

Quote:
Originally Posted by Varmintman View Post
Depending how much is in there floating around I have used a hop sock tied to the end of my hose in the bottling bucket. You need to be very careful though not to get air in the beer or it will taste bad.

And while some here do not advocate it I gently stir after it is in the bucket to thoroughly mix the sugar in.
I stir as well, because I don't calculate and add my priming sugar solution until after I'm all transferred so I know what my bottling volume is minus whatever I end up leaving behind.

Also, if you're using an auto-siphon with a little piece of plastic in the end that acts as a filter, it might get clogged up. I've almost given up on the auto-siphon because of that and a couple of other minor annoyances, but it's not a problem if you're aware of it.
__________________
SilverZero is offline
 
Reply With Quote Quick reply to this message
Old 04-21-2012, 03:55 PM   #5
rfoneill
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Hamburg, NY
Posts: 14
Liked 1 Times on 1 Posts
Likes Given: 8

Default

I usually add priming sugar to bottling bucket and then transfer from secondary seems to mix well that way. Thanks for all the feedback. Now how long if any do I soak the hop sock in sanitizer??

__________________
rfoneill is offline
 
Reply With Quote Quick reply to this message
Old 04-21-2012, 04:56 PM   #6
rfoneill
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Hamburg, NY
Posts: 14
Liked 1 Times on 1 Posts
Likes Given: 8

Default

I usually add priming sugar to bottling bucket and then transfer from secondary seems to mix well that way. Thanks for all the feedback. Now how long if any do I soak the hop sock in sanitizer??

__________________
rfoneill is offline
 
Reply With Quote Quick reply to this message
Old 04-21-2012, 11:15 PM   #7
SilverZero
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Bend, OR
Posts: 684
Liked 30 Times on 24 Posts
Likes Given: 39

Default

Quote:
Originally Posted by rfoneill View Post
I usually add priming sugar to bottling bucket and then transfer from secondary seems to mix well that way. Thanks for all the feedback. Now how long if any do I soak the hop sock in sanitizer??
If it's Star-San, 30 seconds to 2 minutes.

http://www.homebrewtalk.com/f11/star...ct-time-12336/

I would prefer to rack onto my priming solution, but I rack from primary so I have a variable amount of sediment, dry hops, etc. that I need to account for, so I wait and measure after I have my final volume.
__________________
SilverZero is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Filtering forums sharpstick HomeBrewTalk Announcements & Feedback 1 07-20-2009 03:07 PM
Filtering Resulting with "New Posts" BuffaloSabresBrewer HomeBrewTalk Announcements & Feedback 16 09-02-2008 03:40 PM
Primary and secondary Fermenter. Orfy HomeBrewTalk Announcements & Feedback 21 11-07-2007 04:26 PM
How about a bottling/kegging forum? Janx HomeBrewTalk Announcements & Feedback 1 01-26-2005 02:28 AM