The Great Bottle Opener Giveaway

Home Brew Forums > Home Brewing Beer > General Techniques > Bubbles from auto siphon

Reply
 
LinkBack Thread Tools
Old 12-30-2007, 06:17 PM   #1
BrooZer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2007
Posts: 340
Default Bubbles from auto siphon

How can I prevent air bubbles from forming in my auto siphon. It bubbles where the cane meets the plastic hose. I have to force the hose on and then I clamp it on as well but it still gets an air bubble when racking it drives me nuts.

Is a carboy cap a better solution?

__________________

Life, Liberty, And The Pursuit of Hoppyness

BrooZer is offline
 
Reply With Quote Quick reply to this message
Old 12-30-2007, 08:16 PM   #2
AGBrewer
Feedback Score: 0 reviews
 
AGBrewer's Avatar
Recipes 
 
Join Date: Feb 2007
Posts: 421
Liked 4 Times on 1 Posts

Default

I think that is a common problem, both of the ones that I've had have cracked around the curve at the top. The cracks are hard to see but if you look close while racking you can see where the air is entering. You can use some silicone pushed all the way around the curve for a temporary fix

__________________
AGBrewer is offline
 
Reply With Quote Quick reply to this message
Old 12-30-2007, 08:17 PM   #3
5 Is Not Enough
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2007
Location: Erie, PA
Posts: 466
Liked 2 Times on 2 Posts

Default

I always just give it a couple more pumps until it flows a solid stream. Of course this will only work if your hose clamp isn't leaking.

__________________
5 Is Not Enough is offline
 
Reply With Quote Quick reply to this message
Old 12-30-2007, 09:24 PM   #4
RichBrewer
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
RichBrewer's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Denver, Colorado
Posts: 5,749
Liked 77 Times on 35 Posts
Likes Given: 66

Default

I've noticed that, on the down stream side, where ever rigid plastic tubing has vinyl tubing stretched over it bubbles tend to form. I usually pinch off the vinyl and the bubble travels down and out.

__________________

Cheers,
Rich

RichBrewer is offline
 
Reply With Quote Quick reply to this message
Old 12-30-2007, 10:46 PM   #5
AlaskaBrewing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2007
Location: Palmer, Alaska
Posts: 56
Default

I had the same problem. I just pushed more tubing onto the can and they stopped. How far on the can does your tubing go? Try pushing it on further.

__________________
AlaskaBrewing is offline
 
Reply With Quote Quick reply to this message
Old 12-30-2007, 11:04 PM   #6
John Beere
Deep Six Brewing Co.
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
John Beere's Avatar
Recipes 
 
Join Date: May 2006
Location: Valdosta, GA
Posts: 2,140
Liked 33 Times on 27 Posts
Likes Given: 5

Default

Quote:
Originally Posted by RichBrewer
I've noticed that, on the down stream side, where ever rigid plastic tubing has vinyl tubing stretched over it bubbles tend to form. I usually pinch off the vinyl and the bubble travels down and out.
+1 This works...
John Beere is offline
 
Reply With Quote Quick reply to this message
Old 12-31-2007, 12:07 AM   #7
Gedvondur
Feedback Score: 0 reviews
 
Gedvondur's Avatar
Recipes 
 
Join Date: Feb 2007
Location: Green Bay WI
Posts: 135
Liked 2 Times on 1 Posts
Likes Given: 1

Default

I use CIP Film, a light coating of it to prevent that from happening and to ease the removal of the hose from the cane. This also serves to stop the bubbles.



Gedvondur

__________________

Natural 20 Brewery

Gedvondur is offline
 
Reply With Quote Quick reply to this message
Old 12-31-2007, 02:36 PM   #8
malkore
Feedback Score: 0 reviews
 
malkore's Avatar
Recipes 
 
Join Date: Jun 2007
Location: Nebraska
Posts: 6,922
Liked 32 Times on 30 Posts
Likes Given: 9

Default

I only get this initially, because there is trapped air where the cane meets the tubing.
simply pinch the tubing about 2" past the cane attachment, just enough to fill that airspace with beer.
then it'll be fine.

__________________
Malkore
Primary: English Mild
On tap: Pale Ale, Lancelot's Wheat, English Brown Ale, Steam Beer, HoovNuts IPA
Bottled: MOAM, Braggot, Raspberry Melomel, Merlot, Apfelwein, Pyment, Sweet mead, Cabernet
Gal in 2009: 27, Gal in 2010: 34, Gal in 2011: 13, Gal in 2012: 10
malkore is offline
 
Reply With Quote Quick reply to this message
Old 12-31-2007, 04:57 PM   #9
BrooZer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2007
Posts: 340
Default

Thanks everyone for your respones!! I will try your methods next bottling day and hopefully it will help.

__________________

Life, Liberty, And The Pursuit of Hoppyness

BrooZer is offline
 
Reply With Quote Quick reply to this message
Old 12-31-2007, 04:59 PM   #10
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 21,822
Liked 899 Times on 600 Posts
Likes Given: 26

Default

If you have 3/8" ID tubing, that's your problem. 5/16" works much better and you don't even need a clamp.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Air bubbles in the auto-siphon cbird01 Equipment/Sanitation 12 08-21-2011 09:46 PM
how to avoid bubbles with auto siphon? MattHollingsworth Equipment/Sanitation 11 08-19-2009 08:27 PM
Bubbles in my auto siphon emoutal Beginners Beer Brewing Forum 7 09-22-2008 02:15 PM
Auto siphon bubbles? gallagherman General Techniques 5 12-06-2007 01:03 AM
Auto siphon veggiess Bottling/Kegging 14 09-29-2006 04:54 PM