New Giveaway - Wort Monster Conical Fermenter!

Home Brew Forums > Home Brewing Beer > General Techniques > Blew Its Top




Reply
 
LinkBack Thread Tools Display Modes
Old 10-31-2007, 03:38 PM   #1
tdiowa
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2005
Location: Iowa City
Posts: 138
Liked 1 Times on 1 Posts
Likes Given: 1

Default Blew Its Top

I checked for past posts and did not really get the answers I was looking for so I thought I would ask my fellow homebrewers for answers to my questions.....

I had a very successful Brew Day on Sunday. I brewed a mini mash amber Ale with a White Labs English Ale Yeast.

So, here is my question to the board is. I made a starter on Saturday and let it sit until Sunday and dumped it into my 6.5 Conical Fermentor and then aerated the wort. A little action was noted on Monday but Tuesday night when I came home I had bubbles galore in my airlock. This morning when I went to check on my fermentor the top had blown off the fermentor and the airlock was on the floor. Luckily little wort was spilled just messy down the sides of the fermentor. I cleaned everything up and sanitized the lid and the airlock and put everything back together.

My question to the board is, Will the wort still be good? I notice a 2 - 3 inch layer of foam sitting on top of the wort. Should I dump it or wait and see? If I wait should I put another Yeast packet in it?

I have never had that happen before. This was the first time I had ever used a starter. In the past I have always had a lag of 3-4 days before fermemting took off when not using a starter. Is this normal when using a starter? If I do a starter again I will definitely use a blow-off tube.

Inquiring minds would like your opinion....

TD



__________________
tdiowa is offline
 
Reply With Quote Quick reply to this message
Old 10-31-2007, 03:53 PM   #2
deharris
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2007
Location: Philadelphia, PA
Posts: 109
Default

This happens to everyone (though not yet to me, knock wood). The general consensus is that while it can be a bit messy your beer should be fine. The 2-3 inch layer of foam is the krausen and it will have protected your beer from outside particles. Now that it's fermented for a while the increasing alcohol content and heavy yeast activity will ensure that nothing else takes over in the wort. In short, you did the right thing in cleaning and sanitizing. Now you can leave your beer alone.



__________________
deharris is offline
 
Reply With Quote Quick reply to this message
Old 10-31-2007, 04:08 PM   #3
brett
Feedback Score: 0 reviews
 
brett's Avatar
Recipes 
 
Join Date: Aug 2007
Location: Omaha, Nebraska
Posts: 294
Liked 5 Times on 1 Posts

Default

Quote:
Originally Posted by tdiowa
Will the wort still be good?
Most likely, yes.

Quote:
I notice a 2 - 3 inch layer of foam sitting on top of the wort. Should I dump it or wait and see?
Wait and see.

Quote:
If I wait should I put another Yeast packet in it?
No need to, considering you obviously have huge activity.

Quote:
Is this normal when using a starter?
It's normal of a healthy, vigorous fermentation. That means you did well.

Quote:
If I do a starter again I will definitely use a blow-off tube.
Use it every time regardless.
__________________

Primary 1: House Ale (yay!)
Primary 2: empty
Primary 3: empty
Primary 4: empty
Bottle Conditioning: Apfelwein
Bottle Conditioning: Apfelwein + Blueberry
Kegged/Drinking: Partigyle Brown Ale
Conditioning: New House Barley Wine
Conditioning: Ghetto canned kit bitter (Surprisingly getting better w/ age)
Just Finished: Edwort's Apfelwein
Up next: More House Ale ?!?
brett is offline
 
Reply With Quote Quick reply to this message
Old 10-31-2007, 11:38 PM   #4
z987k
Feedback Score: 0 reviews
 
z987k's Avatar
Recipes 
 
Join Date: Feb 2007
Location: Anchorage
Posts: 3,545
Liked 22 Times on 20 Posts
Likes Given: 1

Default

"My question to the board is, Will the wort still be good?"

<EAC> Absolutely not, i'd say it's ruined. You need to immediately send it to either myself or another HBT member for further analysis. </EAC>

z987k is offline
 
Reply With Quote Quick reply to this message
Old 11-01-2007, 12:26 AM   #5
tarheels
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
tarheels's Avatar
Recipes 
 
Join Date: Jul 2007
Location: Grifton, NC
Posts: 213
Liked 1 Times on 1 Posts

Default

some breweries use open fermentation with no problems. the co2 layer and krausen will protect the wort from any bacteria. everything should be fine

__________________
tarheels is offline
 
Reply With Quote Quick reply to this message
Old 11-03-2007, 01:37 AM   #6
feedthebear
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2006
Location: Utah
Posts: 697
Liked 4 Times on 4 Posts

Default

I've done it before and mine turned out fine.

For future reference, an easy way to make a blow off hose for a bucket is to take the rubber grommit off the bucket, force it around your racking hose and fit the grommit back in the bucket. You could still have problems if you have hop leafs or fruit in the primary, though, because those can still cover the entire hole.

__________________
Planning: Agave Witbock, Raisin Beer
Primary: GF Hazelnut Stout
Tertiary: Cranberry-Pom pLambic (est. bottle date: 03/01/08)
Drinking: Cab.Sav/Merlot Wine, Grand Cru, Hazelnut Stout #3, Ordinary Bitter
feedthebear is offline
 
Reply With Quote Quick reply to this message
Old 11-03-2007, 03:34 AM   #7
jonbeck14
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2007
Location: Charlestown, MA
Posts: 36
Default

Quote:
Originally Posted by feedthebear
I've done it before and mine turned out fine.

For future reference, an easy way to make a blow off hose for a bucket is to take the rubber grommit off the bucket, force it around your racking hose and fit the grommit back in the bucket. You could still have problems if you have hop leafs or fruit in the primary, though, because those can still cover the entire hole.

Our first batch http://www.homebrewtalk.com/showthread.php?t=39653

Same thing happened. We just tried the first bottles (2 weeks in the bottle) and it's wonderful! SWMBO absolutely loves it!

DWRHAHB, now I can finally say that, since I have one to taste, and we were so worried after the explosion!

Scroll down a few posts to see the link to the pictures of the explosion's aftermath.


__________________
jonbeck14 is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
blew my lid off! THEDIETZ Fermentation & Yeast 2 11-03-2009 02:45 PM
Keg Blew Alamo_Beer Bottling/Kegging 7 06-24-2008 04:40 PM
lid blew off! LIONS_FAN2539 Beginners Beer Brewing Forum 13 03-12-2007 01:49 AM
Blew my top! Ironhorse General Techniques 5 02-22-2007 03:18 PM