Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Brew Science > Water Report
Reply
 
LinkBack Thread Tools
Old 12-20-2012, 12:02 AM   #1
kranak
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2010
Location: Cleburne, TX
Posts: 71
Liked 7 Times on 2 Posts

Default Water Report

Below is the information I received from Wards labs. I've done a bit of reading, and messing with the brun spread sheet. Where I am hitting my head a bit is the chloride. Am I a bit against the wall with having the chloride starting at 100? I know this is a very high starting amount. While outside of sodium everything else is very low. I am finding it hard to come up with good combinations of additions to get a good balance. My two upcoming brews are a maibock and an english bitter. Ph doesn't seem to be my issue so much as getting a my cl/so4 balanced.

Recommendations or guidance would be great.
Thanks
pH 8.1
Total Dissolved Solids (TDS) Est, ppm 284
Electrical Conductivity, mmho/cm 0.47
Cations / Anions, me/L 4.0 / 4.2
ppm
Sodium, Na 63
Potassium, K 3
Calcium, Ca 18
Magnesium, Mg 4
Total Hardness, CaCO3 62
Nitrate, NO3-N 0.2 (SAFE)
Sulfate, SO4-S 13
Chloride, Cl 100
Carbonate, CO3 < 1
Bicarbonate, HCO3 32
Total Alkalinity, CaCO3 27
Total Phosphorus, P 0.60
Total Iron, Fe < 0.01

__________________
kranak is offline
 
Reply With Quote Quick reply to this message
Old 12-20-2012, 11:33 AM   #2
WoodlandBrew
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
WoodlandBrew's Avatar
Recipes 
 
Join Date: Oct 2012
Location: Malden, MA
Posts: 1,767
Liked 123 Times on 120 Posts
Likes Given: 57

Default

Just getting the Cl and Na down is the issue for most beers. Either one of those at that level might be okay for a sweet or malty beer, but both together might be a little much. Personally I don't consider the cl/so4 balance. If you try to get a balance you are going to end up with salty beer. I think diluting 1:1 with RO will get you where you need to be for most styles. 2 parts tap and 1 part RO would probably be fine for sweet beers. For hoppy styles you might want to go all RO.

The water primer here is good, and if you want a slightly different perspective see this:
http://woodlandbrew.blogspot.com/201...chemistry.html

__________________

The 2nd edition is now available: Brewing Engineering
Woodland Brewing Research Blog Applied Science for Better Beer.

WoodlandBrew is offline
 
Reply With Quote Quick reply to this message
Old 12-20-2012, 03:39 PM   #3
mabrungard
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: Carmel, IN
Posts: 2,719
Liked 184 Times on 161 Posts
Likes Given: 24

Default

The Na and Cl are a little high, but that water can still be suitable under some conditions. Adding sulfate to that water could create antagonistic flavor effects, so a modest hand should be in control if considering adding sulfate. If a more hoppy style is contemplated and a high sulfate content is desired, then modest dilution might be advisable.

The alkalinity is nice and low which is good for paler styles, but might create problems with low mash pH for darker styles. Do visit the Water Knowledge page on the Bru'n Water website if you want usable information for working with that tap water.

__________________

Martin B
Carmel, IN
BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://sites.google.com/site/brunwater/

Like Bru'n Water on Facebook for occasional discussions on brewing water and Bru'n Water

mabrungard is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
North Penn Water Authority (Montgomery Co., PA) Water Report lebshiff21 Brew Science 11 04-30-2014 10:13 PM
Richmond, VA Water Report - Can't find the Ca or Mg in water report alers22 Brew Science 2 10-29-2012 01:00 PM
Water Engineering for PA : AJs Water Primer based on Ward Lab Report mrcastellino Brew Science 4 11-22-2011 03:55 AM
Ward Water Report and Bru'n Water Sheet, now what? ToastedPenguin Brew Science 1 07-22-2011 07:58 PM
Hows my water look? dont really understand the water report ekjohns General Beer Discussion 3 03-30-2010 06:52 PM