Spike Brewing 12.5 Conical Fermenter Giveaway - Enter Now!

Home Brew Forums > Home Brewing Beer > Brew Science > The great nitrogen bubble debate

Reply
 
LinkBack Thread Tools
Old 05-07-2013, 01:09 PM   #51
ajdelange
Senior Member
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: McLean/Ogden, Virginia/Quebec
Posts: 5,848
Liked 568 Times on 468 Posts
Likes Given: 16

Default

The 'widget' has evolved appreciably over the years. The last one I looked at was about the size of a ping pong ball with a very small hole at one pole. These are, I assume, filled with nitrogen at atmospheric pressure before being dropped into the can. The can is then filled with beer and a little liquid N2 is squirted in the instant before the lid is clamped on. The can then goes into the pasteurizing tunnel where the heat causes the N2 to evaporate and the pressure becomes quite high so that the beer, at this higher pressure, is forced into the ball. The can is then sent off to the store, put in your refrigerator and eventually taken out. Even though it is now cold the partial pressure of nitrogen in there is a couple of atmospheres. When you open the can the pressure in the head space drops instantly to 1 atm but the pressure in the ball is still much higher than that as it can only bleed off through the tiny hole. In trying to equalize the pressure nitrogen and beer are forced out through the tiny hole. The widget is designed to spin as a result of this jet of beer. This jet of beer agitates the main volume of beer thus causing the CO2 in solution to come out in much the same way it does when the beer is agitated by being forced through a sparkler or restrictor plate.

__________________
ajdelange is offline
choosybeggar Likes This 
Reply With Quote Quick reply to this message
Old 02-05-2014, 11:58 PM   #52
Scut_Monkey
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Pittsburgh, Pennsylvania
Posts: 2,683
Liked 13 Times on 13 Posts

Default

So I'm reviving this old thread. Did anyone ever go forward with the party pig/bladder testing? I'm going to buy a stout faucet and try running it on CO2 alone. It just doesn't make any sense to me to buy a Nitrogen tank and regulator when I won't be running a "nitrogen" beer that often. Just interested how many people have had success with a stout faucet with a low carbed keg running temporarily at a high pressure during serving. This seems to make sense to me and really shouldn't be a big pain in the butt to change the regulator for serving.

__________________
Scut_Monkey is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pumpkin! The great debate! Stauffbier General Beer Discussion 37 03-19-2013 05:36 AM
Great Beer Debate eljefe General Beer Discussion 0 01-12-2011 02:49 AM
the great debate clay3 Beginners Beer Brewing Forum 4 12-19-2010 05:21 PM
The great bubble debate Yuri_Rage Bottling/Kegging 19 10-31-2009 06:48 PM
The great starter debate brewhead General Techniques 45 02-23-2008 10:19 PM