Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > Recipes/Ingredients > Sugar replacing some malt in RIS?
Reply
 
LinkBack Thread Tools
Old 02-07-2014, 07:57 PM   #1
mwjtennis
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
mwjtennis's Avatar
Recipes 
 
Join Date: Nov 2013
Location: Atlanta, GA
Posts: 32
Liked 3 Times on 3 Posts
Likes Given: 9

Default Sugar replacing some malt in RIS?

Long time lurker, first post. In honor of the olympics in sochi, I am planning to brew 10 gallons of the below this weekend:

http://www.homebrewtalk.com/f68/russ...winner-238807/

I mash in my 16 gal Bayou Classic kettle, drain to buckets, clean the kettle, dump the buckets back in to boil. I have some smaller turkey fryer pots I heat up sparge water on a separate burner, and batch sparge.

I don't think I can quite fit 40+ lb of grain and enough water comfortably in my kettle. So I was thinking to mash with maybe 5lbs less base malt, and add some form of sugar to the last 15 mins of the boil. I tend to like my beers a little dryer anyway. What type of sugar do you think would be best to complement the recipe? And how much sugar per lb of base malt replaced to put in? I have never used extract before other than making starters, maybe should just buy some extract instead?

1) Molasses
2) Dextrose
3) Honey
4) Table sugar
5) Turbinado
6) Extract
7) Other?

__________________
mwjtennis is offline
 
Reply With Quote Quick reply to this message
Old 02-07-2014, 08:02 PM   #2
GuldTuborg
HBT_SUPPORTER.png
Feedback Score: 2 reviews
Recipes 
 
Join Date: Mar 2010
Location: OH
Posts: 3,379
Liked 421 Times on 305 Posts
Likes Given: 232

Default

Why not use extract instead of sugar? That would be the best way to go, I think.

But, if you want to use sugar, I'd go with some form of cane sugar that still has flavor to it (turbinado, demerara, sucanat, whatever). You might want to cut back a bit on the bittering charge if you go this route. How much depends upon your efficiency, but a good starting point is subbing 5lbs malt with 3lbs sugar.

__________________

Don't worry, be hoppy.

GuldTuborg is offline
motorneuron Likes This 
Reply With Quote Quick reply to this message
Old 02-07-2014, 08:51 PM   #3
motorneuron
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Location: New York, NY
Posts: 561
Liked 53 Times on 52 Posts
Likes Given: 26

Default

I agree with GuldTuborg above in all respects. Extract is good if you want maintain the profile of the original beer. But sugar is fine in very strong beers, too.

For a very dark beer like an RIS, you are going to lose the character of most forms of more mild sugar. So either go for plain ole white sugar, or do something adventurous, like mixing in a little molasses. This is one of the rare situations where even the darkest stuff (blackstrap) could be appropriate, though you might not want to use too much of it.

__________________
motorneuron is offline
Newsman Likes This 
Reply With Quote Quick reply to this message
Old 02-08-2014, 01:12 AM   #4
kingwood-kid
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: houston
Posts: 1,425
Liked 87 Times on 80 Posts
Likes Given: 4

Default

Extract may be your best option, aside from brewing 8 gallons instead of 10. I'd buy more than you think you'll need, given the strong possibility that your efficiency for this beer will be prety low. If you use table sugar, I'd increase the amount of Carapils. Another option is to drop the Special B and use some Dark Candi Syrup, although 3 lbs of it would produce a very different beer.

__________________

Say no to intolerance: love gluten and lactose.

kingwood-kid is offline
 
Reply With Quote Quick reply to this message
Old 02-10-2014, 02:55 PM   #5
mwjtennis
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
mwjtennis's Avatar
Recipes 
 
Join Date: Nov 2013
Location: Atlanta, GA
Posts: 32
Liked 3 Times on 3 Posts
Likes Given: 9

Default

Thanks for the replies, so I brewed it yesterday with recipe below.

28lb Maris Otter
3lb Roasted Barley
2lb Special B
1.5lb Chocolate Malt
1 lb Carapils
Mashed starting at 153->temp loss to 148 over 60 mins (mash in un-insulated kettle, this is pretty much how all my mashes been going this winter)

Any comments how the temp loss impacts the sugar profile? Based of other threads, I would think not much since the conversion should happen quickly

Mashed in 10 gals
Batch sparged with 6gals after filling one bucket

Added this in with 15 mins left in boil (disolved in a separate pot two quarts of water)
12oz Grandmas robust molasses
2lb Turbinado sugar
1lb Honey

Hops
1.5oz Magnum @ 60min
4oz EKG @ 30

Got 12.5 gals @ 1.085 (did not calc effiency but I imagine ~70%?)
tasted great

Split it between 3 buckets, and split a 05 yeast cake of a porter I just kegged between the buckets

Its 58 deg F in my basement and all three buckets have action this AM, and smells amazing in the room. I'll post how it came out this fall.

__________________
mwjtennis is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Replacing some malt extract with honey labelgique Beginners Beer Brewing Forum 11 08-26-2011 03:13 PM
Replacing Aromatic Malt Germelli1 Recipes/Ingredients 3 07-19-2011 03:15 AM
Replacing Amber malt by Brown malt? macharles Recipes/Ingredients 8 11-18-2007 06:47 AM
Replacing malt with sugar for diet beer? SilverAnalyst Recipes/Ingredients 14 08-26-2007 04:44 PM
Replacing sugar with malt extract? dirtygreek Beginners Beer Brewing Forum 6 04-28-2005 12:22 AM



Newest Threads

LATEST SPONSOR DEALS