Advertise Here
Main · BrewSpace · Recipes · Wiki · Groups · Clubs · Gallery · Reviews · Video · Blogs · Store

FREE Shipping!!!ALL NEW Rebel Mill Grain Crusher now Available at Rebel BrOld Hops Grab Bag!
Go Back   Home Brew Forums > Home Brewing Beer > Recipes/Ingredients



Reply
 
LinkBack Thread Tools Display Modes
Old 03-17-2009, 09:02 PM   #1
Junior Member
Recipes 
 
Join Date: Dec 2008
Posts: 17
Default Just a simple noob water / mash ph question

Ok guys I think I got a handle on the topic of water, I just need some reassurance of my noob ways. My tap water looks like this:


Calculated Parameters
Anion Sum meq/L - 4.9
Cation Sum meq/L - 4.5
Hardness (CaCO3) mg/L - 120
Ion Balance N/A - 0.90
Dissolved Nitrate (NO3) mg/L <0.01
Dissolved Nitrite (NO2) mg/L - <0.01
Total Dissolved Solids mg/L 260
Misc. Inorganics
Conductivity uS/cm - 460
pH 8.23
Anions
Alkalinity (PP as CaCO3) mg/L - <0.5
Alkalinity (Total as CaCO3) mg/L - 190
Bicarbonate (HCO3) mg/L - 230
Carbonate (CO3) mg/L - <0.5
Hydroxide (OH) mg/L - <0.5
Dissolved Sulphate (SO4) mg/L 50
Dissolved Chloride (Cl) mg/L 2
Nutrients
Dissolved Nitrate (N) mg/L <0.003
Nitrate plus Nitrite (N) mg/L <0.003
Dissolved Nitrite (N) mg/L <0.003
Elements
Dissolved Calcium (Ca) mg/L - 41
Dissolved Iron (Fe) mg/L - <0.06
Dissolved Magnesium (Mg) mg/L - 4.0
Dissolved Manganese (Mn) mg/L - 0.16
Dissolved Potassium (K) mg/L - 0.7
Dissolved Sodium (Na) mg/L - 48

I’ve been using the nomograph in the back of how to brew, it puts my water at 5.93 for mash ph at room temp.( question on this nomograph, do u go vertically from where your line intersects the ra /ph line to determine color or do you follow along your line to where it lands in the beer color?) Furthermore Im assuming mash ph goes down .3ph at 150f mash temp , but it also goes back up after cooling right?


I’m trying to make Bier Muncher’s centennial blonde Ale. My plan is to use 75% RO water to 25% tap water. I plug my tap water numbers in at this ratio and I get a room temp ph of 5.75ish. I believe this might be a little high but I’m using 1.25lb cara-pils ,1lb Carmel crystal and 1lb Vienna malt in addition to the 14lb 2 row base malt. I believe these malts will get me closer to the 4srm rating I'm looking for, but I'm not sure.

One last question, am I risking yeast health or other concerns when diluting my tap water minerals (mg ca ect.) to such low quantities as ca to 10 and mg to 1?


Thanks in advance for you help
happy st patricks day
Brad


bscriver is offline Reply With Quote
Reply
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Noob Mash/sparge questions (partial mash) billpa Beginners Beer Brewing Forum 7 08-03-2011 06:41 PM
Mash efficiency and water chemistry question frolickingmonkey All Grain & Partial Mash Brewing 5 03-02-2009 02:42 AM
Simple Single Stage Infusion Mash Question Mutilated1 General Techniques 20 08-21-2007 11:10 PM
mini mash noob question fezzman All Grain & Partial Mash Brewing 6 05-18-2007 09:34 PM
partial mash noob question chainsawbrewing All Grain & Partial Mash Brewing 14 04-06-2007 01:12 AM





Contact Us - Top - Privacy - All times are GMT. The time now is 10:51 AM.
Copyright © Group Builder, Inc - All Rights Reserved
Craft Beer & Brewery Forum