Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Recipes/Ingredients (http://www.homebrewtalk.com/f12/)
-   -   I will build your IPA/IIPA (http://www.homebrewtalk.com/f12/i-will-build-your-ipa-iipa-322573/)

bobbrews 04-19-2012 11:41 PM

I will build your IPA/IIPA
 
I'm bored and I feel like sharing my hoppy brewing knowledge. I've won several homebrewing awards and people always ask me for advice, which I am flattered to provide. I tend to brew IPAs/IIPAs via partial mash that taste and smell similar to Surly Furious, Lagunitas Sucks, or Firestone Walker Union Jack. I can post recipe suggestions for extract and all-grain brewers as well. However, I do not guarantee that I will reply with a recipe if I don't agree with your responses.

Please post the following:
The only rule is that you must be able to brew via a full volume boil

Kettle size (size - in gallons):
Carboy or Bucket? (size - in gallons):
Extract, Partial Mash, or All-Grain:
Do you BIAB? Yes, No, or What the Hell is that?:
Are you able to rack to secondary?:
Boil size (in gallons):
Batch size (in gallons):
List your top 3-5 favorite commercial American IPAs:
List your top 3-5 favorite commercial American Imperial IPAs:
What is your desired alcohol level for this recipe?:
Can you make a yeast starter, or do you prefer dry yeast?:
Patience level (1-none, 2-low, 3-medium, 4-high):
Quality expectation (1-I don't care, I just want to drink, 2-If you can brew me the average beer then that's cool, 3-pretty high, 4-I want world class):
Balance (1-I would rather have something more sweet than bitter, 2-I want an absolute even bitterness and sweetness, 3-give me a beer with smooth, yet prominent bitterness, 4-blast me with bitterness and peel off my enamel):
Body (1-Thin and highly drinkable, 2-Moderate body, drinks fairly easy, 3-Full body, a sipper for sure):
Malt profile (1-I want to taste a lot of different grains, 2-I want an even portrayal of malt and hops, 3-I don't really care about the malt as much as the hops, but malt still matters, 4-I want all hops, in my face with little to no malt character):

JeepDiver 04-19-2012 11:54 PM

Gee think highly of yourself don't you.

bobbrews 04-19-2012 11:57 PM

It's a game dude. Chill out.

paulster2626 04-20-2012 12:00 AM

Quote:

Originally Posted by bobbrews (Post 4010876)
I feel like sharing my hoppy brewing knowledge. I've won several homebrewing awards and people always ask me for advice, which I am flattered to give. I tend to brew IPAs/IIPAs via partial mash that taste and smell similar to Surly Furious, Lagunitas Sucks, or Firestone Walker Union Jack. I can post recipe suggestions for extract and all-grain brewers as well. However, I do not guarantee that I will reply with a recipe if I don't agree with your responses.

Please post the following:
The only rule is that you must be able to brew via a full volume boil:

Kettle size (size - in gallons):
Carboy or Bucket? (size - in gallons?):
Extract, Partial Mash, or All-Grain:
Do you BIAB? Yes, No, or What the Hell is that?:
Are you able to rack to secondary?:
Boil size (in gallons):
Batch size (in gallons):
List your top 3-5 favorite commercial American IPAs:
List your top 3-5 favorite commercial American Imperial IPAs:
What is your desired alcohol level for this recipe?:
Can you make a yeast starter, or do you prefer dry yeast?:
Patience level (1-none, 2-low, 3-medium, 4-high):
Quality expectation (1-I don't care, I just want to drink, 2-If you can brew me the average beer then that's cool, 3-pretty high, 4-I want world class):
Balance (1-I would rather have something more sweet than bitter, 2-I want an absolute even bitterness and sweetness, 3-give me a beer with smooth, yet prominent bitterness, 4-blast me with bitterness and peel off my enamel):
Body (1-Thin and highly drinkable, 2-Moderate body, drinks fairly easy, 3-Full body, a sipper for sure):
Malt profile (1-I want to taste a lot of different grains, I want an even portrayal of malt and hops, 3-I don't really care about the malt as much as the hops, but malt still matters, 4-I want all hops, in my face with little to no malt character):

I'm in!

Kettle size (size - in gallons): 8
Carboy or Bucket? (size - in gallons?): Bucket - 6
Extract, Partial Mash, or All-Grain: AG
Do you BIAB? Yes, No, or What the Hell is that?: No
Are you able to rack to secondary?: Yes
Boil size (in gallons): 6-7
Batch size (in gallons): 5-6
List your top 3-5 favorite commercial American IPAs: Dogfish 60, Hop Head by Tree Brewing Co., Hoptical Illusion by Flying Monkeys
List your top 3-5 favorite commercial American Imperial IPAs: Dogfish 90, Alchemist Heady Topper (dear god this is amazing), Lawson's Finest Liquids IIPA, Smashbomb by Flying Monkeys (could also just be a normal IPA)
What is your desired alcohol level for this recipe?: 6-7%
Can you make a yeast starter, or do you prefer dry yeast?: I love making yeast starters - people see the flask and think I'm cooking meth.
Patience level (1-none, 2-low, 3-medium, 4-high): 4
Quality expectation (1-I don't care, I just want to drink, 2-If you can brew me the average beer then that's cool, 3-pretty high, 4-I want world class): 4
Balance (1-I would rather have something more sweet than bitter, 2-I want an absolute even bitterness and sweetness, 3-give me a beer with smooth, yet prominent bitterness, 4-blast me with bitterness and peel off my enamel): 3
Body (1-Thin and highly drinkable, 2-Moderate body, drinks fairly easy, 3-Full body, a sipper for sure): 2.5?
Malt profile (1-I want to taste a lot of different grains, I want an even portrayal of malt and hops, 3-I don't really care about the malt as much as the hops, but malt still matters, 4-I want all hops, in my face with little to no malt character): 3

This will be fun!

JeepDiver 04-20-2012 12:10 AM

Quote:

Originally Posted by JeepDiver
Gee think highly of yourself don't you.

You replied to me so does that mean you agree with me? :). I love internet games

wakeuphicks 04-20-2012 12:40 AM

Just what I was looking for! I came on here looking for ideas for IPA recipes, this will be my 3rd brew and Ive used clones for my first 2, but wanted to switch it up a little bit this time. Disclaimer though: I dont have full boil capability, so you can answer or not, but I'd appreciate any recipe ideas you can give. I really want to make a full bodied IPA with strong malt as well as hop flavor with a good alcohol content, but not so thick or bitter to the point where its a struggle to get through one of them. Id also like to try my hand at dry hopping with this batch. Thanks in advance.


Quote:

Originally Posted by bobbrews (Post 4010876)
I'm bored and I feel like sharing my hoppy brewing knowledge. I've won several homebrewing awards and people always ask me for advice, which I am flattered to provide. I tend to brew IPAs/IIPAs via partial mash that taste and smell similar to Surly Furious, Lagunitas Sucks, or Firestone Walker Union Jack. I can post recipe suggestions for extract and all-grain brewers as well. However, I do not guarantee that I will reply with a recipe if I don't agree with your responses.

Please post the following:
The only rule is that you must be able to brew via a full volume boil

Kettle size (size - in gallons): 5 gal i believe? I usually do a partial boil w/3 gals for my 5 gal batch
Carboy or Bucket? (size - in gallons): I have both - standard bottling bucket, 6 1/2 gal carboy
Extract, Partial Mash, or All-Grain: Extract
Do you BIAB? Yes, No, or What the Hell is that?: WTF is that?
Are you able to rack to secondary?: yes
Boil size (in gallons): 3 gals
Batch size (in gallons): 5 gals
List your top 3-5 favorite commercial American IPAs: DH 60 min, Lagunitas IPA, Stone IPA
List your top 3-5 favorite commercial American Imperial IPAs: Stone Double Dry-Hopped Ruination, Great Divide Titan IPA
What is your desired alcohol level for this recipe?: 6-6.5%
Can you make a yeast starter, or do you prefer dry yeast?: I use liquid yeast
Patience level (1-none, 2-low, 3-medium, 4-high): 2
Quality expectation (1-I don't care, I just want to drink, 2-If you can brew me the average beer then that's cool, 3-pretty high, 4-I want world class): 2.5
Balance (1-I would rather have something more sweet than bitter, 2-I want an absolute even bitterness and sweetness, 3-give me a beer with smooth, yet prominent bitterness, 4-blast me with bitterness and peel off my enamel): 3
Body (1-Thin and highly drinkable, 2-Moderate body, drinks fairly easy, 3-Full body, a sipper for sure): 2.5 - this is really what IM aiming for: full body, even malt and hops to answer your question below. Not quite a sipper...I want to be able to drink 2or 3, but I really want the full body to be the focus with the hops
Malt profile (1-I want to taste a lot of different grains, I want an even portrayal of malt and hops, 3-I don't really care about the malt as much as the hops, but malt still matters, 4-I want all hops, in my face with little to no malt character):

2

bobbrews 04-20-2012 12:52 AM

Quote:

Originally Posted by paulster2626 (Post 4010934)
Kettle size (size - in gallons): 8
Carboy or Bucket? (size - in gallons?): Bucket - 6
Extract, Partial Mash, or All-Grain: AG
Do you BIAB? Yes, No, or What the Hell is that?: No
Are you able to rack to secondary?: Yes
Boil size (in gallons): 6-7
Batch size (in gallons): 5-6
List your top 3-5 favorite commercial American IPAs: Dogfish 60, Hop Head by Tree Brewing Co., Hoptical Illusion by Flying Monkeys
List your top 3-5 favorite commercial American Imperial IPAs: Dogfish 90, Alchemist Heady Topper (dear god this is amazing), Lawson's Finest Liquids IIPA, Smashbomb by Flying Monkeys (could also just be a normal IPA)
What is your desired alcohol level for this recipe?: 6-7%
Can you make a yeast starter, or do you prefer dry yeast?: I love making yeast starters - people see the flask and think I'm cooking meth.
Patience level (1-none, 2-low, 3-medium, 4-high): 4
Quality expectation (1-I don't care, I just want to drink, 2-If you can brew me the average beer then that's cool, 3-pretty high, 4-I want world class): 4
Balance (1-I would rather have something more sweet than bitter, 2-I want an absolute even bitterness and sweetness, 3-give me a beer with smooth, yet prominent bitterness, 4-blast me with bitterness and peel off my enamel): 3
Body (1-Thin and highly drinkable, 2-Moderate body, drinks fairly easy, 3-Full body, a sipper for sure): 2.5?
Malt profile (1-I want to taste a lot of different grains, I want an even portrayal of malt and hops, 3-I don't really care about the malt as much as the hops, but malt still matters, 4-I want all hops, in my face with little to no malt character): 3

You'll have to settle for 7.7% abv...

6.50 gallon boil
5.20 gallon batch
90 minute boil
1.073 OG
1.015 FG
90 IBUs
19 day primary, 12 day secondary (with dryhops)

6 lbs. 8 oz. Rahr American 2-row
3 lbs. 8 oz. Fawcett Marris Otter
1 lb. 8 oz. German 2-row Pils
1 lb. 2 oz. Corn Sugar (Late Addition)
1 lb. Cara-pils
4 oz. American Crystal 40

1.0 oz. Columbus leaf 14.0 @ 60 min
1.0 oz. Chinook leaf 11.0 @ 20 min
1.0 oz. Amarillo leaf 10.0 @ 10 min
1.0 oz. Citra leaf 13.0 @ 10 min
1.0 oz. Centennial leaf 11.0 @ flameout
1.5 oz. Citra leaf 13.0 @ flameout
1.0 oz. Amarillo leaf 10.0 @ 12 day dryhop
1.0 oz. Centennial leaf 11.0 @ 12 day dryhop
1.5 oz. Citra leaf 13.0 @ 12 day dryhop

2.1 liter WLP001 Starter w/Intermittent Shaking

HopnessMontster 04-20-2012 12:59 AM

My third ever is in the secondary now - a wheat. Looking to brew an IPA next. Thanks for the recipe offer.

Kettle size: 7 Gal
Carboy 6 Gal
Extract + Steeping Grains
Do you BIAB? What the Hell is that?:
Are you able to rack to secondary?: Yes
Boil size (in gallons): 5
Batch size (in gallons): 5 Are Boil and Batch Different?
List your top 3-5 favorite commercial American IPAs: Lagunitas Maximus, Founders Centennial, Peak Organic, Monday Night Eye Patch
List your top 3-5 favorite commercial American Imperial IPAs: Hop Stoopid, Bells Hopslam, Weyerbacher Double Simcoe
What is your desired alcohol level for this recipe?: 5.5-7
Can you make a yeast starter, or do you prefer dry yeast?: Can make starter and have stir plate
Patience level (1-none, 2-low, 3-medium, 4-high): 4
Quality expectation: 3-4
Balance 3:
Body: 2
Malt profile: 3

copyright1997 04-20-2012 01:01 AM

I'm sending this via iPhone so it's free form. I'd like some awesome recipes that don't use centennial, cascade, chinook, Amarillo, Simcoe. Why? Because I've done lots of them with those hops, and I have pounds of Columbus, Williamette, Galena, brewers gold, and several others that I would like to use up.

Anything else is open, I have plenty of different grains, can do a starter, extra carboys and kegs etc.

Got anything good? I like just about every ipa I drink (had a home brew lakefront clone and a real flower power tonight, both tasty!)

poislb 04-20-2012 01:12 AM

What the hell, im in..

Kettle size (size - in gallons): 10 gal blichmann, or 15.5gal keggle
Carboy or Bucket? (size - in gallons): 6 gallon carboy
Extract, Partial Mash, or All-Grain: all grain
Do you BIAB? Yes, No, or What the Hell is that?: No
Are you able to rack to secondary?: Yes
Boil size (in gallons): 6.5-7
Batch size (in gallons): 5.5
List your top 3-5 favorite commercial American IPAs: Founders cent IPA, founders all day IPA, big sky IPA, new belguim....Zombie dust, and yes its borderline ipa...lol
List your top 3-5 favorite commercial American Imperial IPAs: Founders Double trouble, hopslam, New Glarus IIpa


What is your desired alcohol level for this recipe?: 6.5
Can you make a yeast starter, or do you prefer dry yeast?: yes
Patience level (1-none, 2-low, 3-medium, 4-high): 3
Quality expectation (1-I don't care, I just want to drink, 2-If you can brew me the average beer then that's cool, 3-pretty high, 4-I want world class): 3
Balance (1-I would rather have something more sweet than bitter, 2-I want an absolute even bitterness and sweetness, 3-give me a beer with smooth, yet prominent bitterness, 4-blast me with bitterness and peel off my enamel): 3
Body (1-Thin and highly drinkable, 2-Moderate body, drinks fairly easy, 3-Full body, a sipper for sure): 2
Malt profile (1-I want to taste a lot of different grains, 2-I want an even portrayal of malt and hops, 3-I don't really care about the malt as much as the hops, but malt still matters, 4-I want all hops, in my face with little to no malt character): 3


All times are GMT. The time now is 08:41 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.