Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Are you as lazy as me?
Reply
 
LinkBack Thread Tools
Old 05-21-2013, 05:04 PM   #1
oakbarn
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
oakbarn's Avatar
Recipes 
 
Join Date: Jun 2011
Location: Argyle, Texas
Posts: 738
Liked 51 Times on 40 Posts
Likes Given: 26

Default Are you as lazy as me?

After a year and a few batches, I finally decided to clean my Blickmann 3 part ball valve. It was fairly easy to disassemble (Not as easy as a Stout or Brewers Hardware one), but was I in for a surprise. We "cleaned" the ball valve after every brew by cycling heated PBW through the valve for about 30 minutes, the cycling Star San for about 5 minutes.


I used a toothbrush after soaking in PBW overnight and got most of the junk off. I decided to boil the pieces and the second pix shows what came off the threads, after I had cleaned with the brush and thought they were clean.

Guess I will have to clean every time now by taking apart like I do the Stout valves.

junk1.jpg   junk2.jpg  
__________________
oakbarn is offline
 
Reply With Quote Quick reply to this message
Old 05-21-2013, 06:12 PM   #2
jdauria
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
jdauria's Avatar
Recipes 
 
Join Date: Sep 2010
Location: Braintree, Massachusetts
Posts: 514
Liked 34 Times on 31 Posts
Likes Given: 29

Default

Think I know what I am doing this weekend, have the same valve.

__________________

Member of the Metro South Homebrew League (Mash-Holes) - Weymouth, MA

Primary - Bacon Helles
Secondary - Empty
Kegged - 1774 Porter, California Common
Bottled - Nothing

jdauria is offline
Johnnyhitch1 Likes This 
Reply With Quote Quick reply to this message
Old 05-21-2013, 08:05 PM   #3
orangehero
Feedback Score: 2 reviews
Recipes 
 
Join Date: Apr 2010
Location: Northeast
Posts: 1,139
Liked 144 Times on 90 Posts
Likes Given: 214

Default

If you open the ball valve half-way while recirculating the hot PBW that should get them pretty clean.

__________________
orangehero is offline
 
Reply With Quote Quick reply to this message
Old 05-21-2013, 09:07 PM   #4
tdawg183
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: Raleigh, NC
Posts: 27
Liked 2 Times on 2 Posts

Default

Quote:
Originally Posted by orangehero
If you open the ball valve half-way while recirculating the hot PBW that should get them pretty clean.
Agreed. Just make sure to rotate the valve while recirculating. This has never been a problem for our setup since doing that.
__________________

I got stax, that's just how it is.

-birdman

tdawg183 is offline
 
Reply With Quote Quick reply to this message
Old 05-24-2013, 01:06 PM   #5
oakbarn
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
oakbarn's Avatar
Recipes 
 
Join Date: Jun 2011
Location: Argyle, Texas
Posts: 738
Liked 51 Times on 40 Posts
Likes Given: 26

Default

Quote:
Originally Posted by tdawg183 View Post
Agreed. Just make sure to rotate the valve while recirculating. This has never been a problem for our setup since doing that.
Have you taken the valve apart? Mine always "looked" clean. Also, I am not sure throttling the supply side on a pump is good.
__________________
oakbarn is offline
 
Reply With Quote Quick reply to this message
Old 05-24-2013, 03:51 PM   #6
ODI3
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2010
Location: LONDON, Ontario Canada
Posts: 203
Liked 8 Times on 8 Posts
Likes Given: 1

Default

I only circulate a litre or 2 through it when kettle is boiling to sanitize it, and rinse some water through it after brewing.

See no evil, hear no evil.

__________________
ODI3 is offline
 
Reply With Quote Quick reply to this message
Old 05-25-2013, 01:40 PM   #7
tdawg183
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: Raleigh, NC
Posts: 27
Liked 2 Times on 2 Posts

Default

Quote:
Originally Posted by oakbarn

Have you taken the valve apart? Mine always "looked" clean. Also, I am not sure throttling the supply side on a pump is good.
Yes actually, the only reason we started doing this was because of what was found the first time it was disassembled. And great clarification for this NOT to be done on the supply side of the pump. We run it wide open when the valve feeds the pump, we only throttle the valve once the flow is switched so that the valve is on the output of the pump.
__________________

I got stax, that's just how it is.

-birdman

tdawg183 is offline
 
Reply With Quote Quick reply to this message
Old 05-25-2013, 03:08 PM   #8
oakbarn
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
oakbarn's Avatar
Recipes 
 
Join Date: Jun 2011
Location: Argyle, Texas
Posts: 738
Liked 51 Times on 40 Posts
Likes Given: 26

Default

I also have found that taking apart my Stout 2 piece valves that they look clean as we do it every time now ( and clean them anyway apart as it is easy). We used to have a igloo mash tun and the bazzoka screen. We decided one time to boil and clean it as well and it was terrible. We has used the "flow" cleaner through it and force cleaner backwards but the gunk that came out was nasty when we boiled it. We switched to a false bottom.

__________________
oakbarn is offline
 
Reply With Quote Quick reply to this message
Old 05-26-2013, 09:56 PM   #9
bob352
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2009
Location: Colorado
Posts: 98
Liked 8 Times on 6 Posts

Default

I had the same problem with the 3 piece ball valves.
A vendor said they were trying to source a valve that would
completely encapsulate the ball. So no dead space when the valve is closed.
But I did not hear if they found one.

I replaced my ball valves with butterfly valves.
So easy to keep clean. They are great.

Not a perfect solution on the pump output because not as much control
on the flow rate as a ball valve.

Bob

__________________
bob352 is offline
 
Reply With Quote Quick reply to this message
Old 05-27-2013, 02:18 AM   #10
wilserbrewer
BIAB Expert Tailor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 10 reviews
 
wilserbrewer's Avatar
Recipes 
 
Join Date: May 2007
Location: Jersey Shore, Jersey
Posts: 7,426
Liked 601 Times on 494 Posts
Likes Given: 11

Default

Are you as lazy as me?

No, I am lazier, I don't use a valve that I have to clean...I boil and ferment in the kettle, then rack to kegs.
__________________
wilserbrewer BIAB bags
custom sized BIAB Bags, hop bags and ratchet pulleys at reasonable prices


Http://biabbags.webs.com/

Corona Mill Bucket System V. 2
wilserbrewer is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why can't I be lazy... mpjardim Brew Science 2 01-23-2011 01:06 PM
Lazy (too lazy?) cider experiment - what now? jackbird Cider Forum 5 11-19-2008 11:40 PM
Lazy Lazy Yeast landis Recipes/Ingredients 8 09-24-2008 09:49 PM
So I've been a little lazy... 98EXL Bottling/Kegging 14 07-10-2008 06:15 AM
I am Lazy Cheeto Home Brewing Photo Forum 12 03-25-2008 12:56 PM



Newest Threads

LATEST SPONSOR DEALS