Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Wort Chillers - Can you Reshape Them to Fit New Kettle?
Reply
 
LinkBack Thread Tools
Old 01-29-2012, 08:54 PM   #1
boozehoundbrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2011
Location: chicago, IL
Posts: 15
Liked 1 Times on 1 Posts
Likes Given: 2

Default Wort Chillers - Can you Reshape Them to Fit New Kettle?

I made my own wort chiller a few years ago. It is a double-coil (one smaller cylinder within a larger one, with a few inches in between), made of 90 feet of 3/8" copper tubing. [Shown on its side in the picture below]
[IMG] Homemade by clitesbr, on Flickr[/IMG]

I designed it to fit my old 5 gallon kettle, which was tall and skinny, and it worked perfectly for that. But I just upgraded to two 15 gallon kettles, and they're about 8" WIDER in diameter, so there's lots of extra room on all sides of my wort. Even when the new kettles have 5 gallons inside, they're so big that about a third of my wort chiller is just sticking out above the top of the liquid. As a result, its taking me 15 minutes (instead of just 5, with former setup) to cool 5 gallons of wort from 212 to 65.

So, my question:
Is it possible to re-mold my copper tubing into a new wort chiller? And, if so, how do I go about that?
- Should I try to uncoil all the copper all the way, then start from scratch?
- Or, would it be better to slowly work each set of coils wider and wider until they reach the diameter that I want?

Also, I'd love suggestions about whether to keep the double-coil design, or if you think I should just switch to a standard shaped immersion chiller.

Thanks, in advance, for your help.

__________________

Cheers!


boozehoundbrew is offline
 
Reply With Quote Quick reply to this message
Old 01-31-2012, 07:59 PM   #2
scottland
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: Chandler, AZ
Posts: 2,117
Liked 138 Times on 105 Posts
Likes Given: 12

Default

Yes, you can re-shape them. Just work slowly. I've done it multiple times to the same chiller.

__________________
http://www.bertusbrewery.com/
scottland is offline
 
Reply With Quote Quick reply to this message
Old 02-01-2012, 03:52 AM   #3
postal_penguin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Aurora, Co
Posts: 173
Liked 4 Times on 4 Posts

Default

I'd just widen the outer coil and leave the inner coil alone.

__________________

Primary: Apfelwein, Raspberry Lambic, Experimental Wheat cider, IPA
Secondary: Empty
Keg 1: Hefe
Keg 2: Irish Stout
Keg 3: Peach Kolsch
Keg 4: Empty
Bottled: Bourbon Vanilla Porter, Chocolate Stout

postal_penguin is offline
 
Reply With Quote Quick reply to this message
Old 02-17-2012, 07:32 PM   #4
Rickochet
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Marion, Indiana
Posts: 109
Liked 3 Times on 3 Posts
Likes Given: 4

Default

As long as you take your time copper is pretty forgiving. Patience is the key--go too fast and a kink will result. Let us know how you come out when you are done. 90 feet is a lot of copper!!!

__________________
Rickochet is offline
 
Reply With Quote Quick reply to this message
Old 02-17-2012, 07:40 PM   #5
rhamilton
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Location: Austin, Texas
Posts: 1,257
Liked 64 Times on 53 Posts
Likes Given: 1

Default

Quote:
Originally Posted by scottland View Post
Yes, you can re-shape them. Just work slowly. I've done it multiple times to the same chiller.
+1. I've reshaped my 50ft coil from a standard coil, to a rib-cage style, and finally to a clover-leaf style. Patience and a nice rubber mallet is handy
__________________
On Deck: Cornucopia Oktoberfest
Primary: Centennial Blonde v2, Ed Wort's Kolsch
Secondary: none
Kegged: County Jail Pale Ale, AHS Anniv IPA, AHS Brooklyn Brown, Raspberry Wheat, Blood Orange Hefe, Ranger IPA clone (x2), Newcastle clone, AHS Irish Red, Centennial Blonde
Bottled: Session Series Belgian Saison, Apocalypso, Pecan Porter, DFH 90 Minute Clone, Apfelwein (x2), Wytchmaker Rye IPA Clone, Vienna/Simcoe SMaSH, Munich/Cascade SMaSH
rhamilton is offline
 
Reply With Quote Quick reply to this message
Old 02-17-2012, 07:49 PM   #6
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,282
Liked 1074 Times on 716 Posts
Likes Given: 28

Default

Definitely don't straighten it out. You can work the coil over a larger diameter object no problem. You could also sell that one to someone with a tall skinny pot or sell it with the old pot as a package deal and rebuild.

__________________
BrewHardware.com has a new website. Please check it out and let me know what you think!
New 100% Stainless Steel Heating Elements are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc. Did you know we are also now a full service homebrew shop selling malt, hops, yeast (Wyeast), etc?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wort Chillers Hastings Equipment/Sanitation 1 09-12-2010 02:14 AM
possible to reshape immersion chiller? Pickngrin Equipment/Sanitation 2 09-18-2009 08:07 PM
Wort Chillers? Stevorino Equipment/Sanitation 20 02-23-2008 04:37 PM
Wort Chillers jerly Equipment/Sanitation 9 07-03-2007 12:27 AM
wort chillers and why brewhead Equipment/Sanitation 22 05-12-2005 10:11 PM



Newest Threads

LATEST SPONSOR DEALS