Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Taylor TruTemp Digital Thermometer...
Reply
 
LinkBack Thread Tools
Old 11-05-2007, 07:40 PM   #1
brett
Feedback Score: 0 reviews
 
brett's Avatar
Recipes 
 
Join Date: Aug 2007
Location: Omaha, Nebraska
Posts: 294
Liked 5 Times on 1 Posts

Default Taylor TruTemp Digital Thermometer...

Does anyone use this digital thermometer? What is your opinion of it?

http://www.target.com/Taylor-TruTemp...mometer&page=1

I purchased one last Saturday, and it was a dud. Kept turning on and off randomly. So I took it back, and exchanged for a new one. Tried it out on my batch I was brewing that day, and read my mash temp about 5 degrees lower than my trusty glass thermometer, seen here:

http://pivo.northernbrewer.com/nbsto...7409&x=49&y=17

After the mash, the digital thermometer started to read 205F and wouldn't budge. Won't go up, won't go down. What the f*ck. Second one broken too I guess...

Does anyone else use this digital thermometer? Is this just bad luck on my part? What do you think is more accurate, the digital or the old-fashion glass?

__________________

Primary 1: House Ale (yay!)
Primary 2: empty
Primary 3: empty
Primary 4: empty
Bottle Conditioning: Apfelwein
Bottle Conditioning: Apfelwein + Blueberry
Kegged/Drinking: Partigyle Brown Ale
Conditioning: New House Barley Wine
Conditioning: Ghetto canned kit bitter (Surprisingly getting better w/ age)
Just Finished: Edwort's Apfelwein
Up next: More House Ale ?!?

Last edited by brett; 11-05-2007 at 07:45 PM.
brett is offline
 
Reply With Quote Quick reply to this message
Old 11-05-2007, 07:51 PM   #2
Moonpile
Feedback Score: 0 reviews
 
Moonpile's Avatar
Recipes 
 
Join Date: Apr 2007
Location: Pasadena, MD
Posts: 685
Default

I think that might be the one I have, but without seeing it I'm not sure.

Did you waterproof the cord? I had a Pyrex brand one which I got the cord wet on and it went haywire.

Apparently Walmart now has a $16 one with silicone sheath. I must have missed it 'cause I bought mine 3 weeks ago for $13 with no silicone sheath, but I put aquarium tubing on (hint: spray probe with olive oil or something to make it slide on).

Worked just fine, but I can't say I calibrated it against a glass thermo (since I don't have one).

__________________
Moonpile is offline
 
Reply With Quote Quick reply to this message
Old 11-05-2007, 07:56 PM   #3
uwjester
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
uwjester's Avatar
Recipes 
 
Join Date: Sep 2007
Location: Fort Collins, CO
Posts: 736
Liked 3 Times on 3 Posts
Likes Given: 1

Default

I have/had that one too and it stopped working after I allowed the probe to submerge in a carboy. I wanted to try the temp at different levels to make sure I could pitch the yeast and the probe hasn't worked since. For me, the temp shows around 90F at room temp (70F or so) so I set it aside and bought a new walmart one. I don't know if the walmart version is sealed or not, but I don't plan on submerging this one.

__________________

--------------------------------------------------
This space intentionally left blank.
--------------------------------------------------

uwjester is offline
 
Reply With Quote Quick reply to this message
Old 11-05-2007, 07:57 PM   #4
brett
Feedback Score: 0 reviews
 
brett's Avatar
Recipes 
 
Join Date: Aug 2007
Location: Omaha, Nebraska
Posts: 294
Liked 5 Times on 1 Posts

Default

Quote:
Originally Posted by Moonpile
I think that might be the one I have, but without seeing it I'm not sure.

Did you waterproof the cord? I had a Pyrex brand one which I got the cord wet on and it went haywire.

Apparently Walmart now has a $16 one with silicone sheath. I must have missed it 'cause I bought mine 3 weeks ago for $13 with no silicone sheath, but I put aquarium tubing on (hint: spray probe with olive oil or something to make it slide on).

Worked just fine, but I can't say I calibrated it against a glass thermo (since I don't have one).
Nope, didn't water-proof. :-( But then again I didn't fully submerge the probe in the mash/wort. I don't know what's happening, but even if it is my fault, I'm beginning to think the quality of this thermometer will not meet my needs.... :-(
__________________

Primary 1: House Ale (yay!)
Primary 2: empty
Primary 3: empty
Primary 4: empty
Bottle Conditioning: Apfelwein
Bottle Conditioning: Apfelwein + Blueberry
Kegged/Drinking: Partigyle Brown Ale
Conditioning: New House Barley Wine
Conditioning: Ghetto canned kit bitter (Surprisingly getting better w/ age)
Just Finished: Edwort's Apfelwein
Up next: More House Ale ?!?
brett is offline
 
Reply With Quote Quick reply to this message
Old 11-05-2007, 08:05 PM   #5
cpbergie
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2007
Location: San Diego
Posts: 213
Default

i have two of them. I "calibrated" it in a glass of ice water, and it seemed to be accurate. Right before it went down to 32 degrees, it starting showing "LO" for the temperature. The two i have are within 1 degree of each other.

I did waterproof one for the mash.

__________________
cpbergie is offline
 
Reply With Quote Quick reply to this message
Old 11-05-2007, 08:43 PM   #6
raceskier
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2007
Location: Port Townsend, Washington
Posts: 607
Liked 1 Times on 1 Posts

Default

I have one. I did the waterproofing with silicone tubing. It has been reliable, but as I documented here: http://www.homebrewtalk.com/showthre...ht=thermometer
not all that accurate.

__________________

Primary: , Boddington's Clone, Mirror Pond w/Marris Otter
Secondary:
Bottled: Fullers ESB Clone
Kegged: Mirror Pond Clone
Drinking: BM's Kona Fire Rock, Dead Guy Clone, Alaskan Amber Alt Clone, Firestone DBA Clone, Magnum/Crystal IPA
Next up: Burton IPA

raceskier is offline
 
Reply With Quote Quick reply to this message
Old 11-06-2007, 05:06 PM   #7
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,013
Liked 975 Times on 652 Posts
Likes Given: 28

Default

If you get moisture down into the metal part of the probe, it will read wrong. If you do the silicone air tubing trick that I documented, you can dunk it into any hot liquid, mash or bk wort. However, don't try then using it in an oven to say monitor the temp of a ham or turkey. The silicone tubing and Orings I used melted nicely at 350F. I found my tru-temps to not be so "tru". One read 2F low and the other read 4F low.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is online now
 
Reply With Quote Quick reply to this message
Old 11-06-2007, 05:19 PM   #8
rohanski
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2006
Location: Boerne, Texas
Posts: 433
Default

This it the one I got. http://www.amazon.com/Tru-Temp-Digit...372997&sr=1-62 You can submerge the whole cord.

__________________
rohanski is offline
 
Reply With Quote Quick reply to this message
Old 11-06-2007, 05:31 PM   #9
psi3000
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2007
Posts: 81
Liked 2 Times on 1 Posts

Default

I have a bunch of digital wired and wireless thermometers. Not a single one of them reads the same. I would calibrate them but I have nothing to calibrate them to. Should I be really concerned that during my mash I am + or - 3 or 4 degrees?. Is it that important to be at 151 F instead of 155F?

__________________
psi3000 is offline
 
Reply With Quote Quick reply to this message
Old 11-06-2007, 05:34 PM   #10
rohanski
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2006
Location: Boerne, Texas
Posts: 433
Default

I have two different ones and surprisingly they are within on tenth of a degree.

__________________
rohanski is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Digital thermometer Cerpintine General Beer Discussion 21 04-28-2010 05:56 PM
Digital Thermometer Repair bierslayer Equipment/Sanitation 0 04-08-2009 06:38 PM
digital thermometer - Is it worth it? Monk All Grain & Partial Mash Brewing 28 01-02-2008 11:42 PM
Digital Thermometer in the Mash Tun ohiodad General Techniques 13 11-28-2007 04:13 AM
digital thermometer mrk305 All Grain & Partial Mash Brewing 11 09-05-2007 12:53 AM