Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Sometimes you feel like an idiot...
Reply
 
LinkBack Thread Tools
Old 01-25-2010, 01:43 PM   #1
roverlandpark
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Oklahoma City, OK
Posts: 23
Default Sometimes you feel like an idiot...

For my last two brew sessions, my propane burner flame seemed very low. It would take nearly two hours to boil my 6.5 gallons of water. I swapped propane tanks and fiddled with the regulator and nothing seemed to work.

So yesterday, I decide to brew and I turn on the burner. It was roaring! I didn't time it, but I swear it was less than thirty minutes to bring it to a boil. My father-in-law was going to brew with me that day, but he hadn't arrived. Seeing how I hadn't done anything but boil the water, I decided to shut off the burner and wait for him to arrive.

After he arrives, we go to the garage and we start the burner. The flame was very weak! What the heck! Just an hour before it was going to town and now this? So I replayed in my mind what I did when I turned on the burner. Sure enough, the first time I had turned the regulator valve off before I turned the the valve on the propane tank. I shut off the propane, turned off the regulator, and then re-opened the propane valve. I then turned the regulator to on and lit the flame. Whoosh!!! It was back to where it was earlier in the day.

This was an easy fix and I was able to repeat later in the day. All I can figure is that when the regulator was left in the on position, the gas flow is restricted for safety. I only wish I had figured this out earlier. I could have saved so much time during my previous brew sessions.

Lesson learned!

__________________
roverlandpark is offline
 
Reply With Quote Quick reply to this message
Old 01-25-2010, 01:47 PM   #2
llazy_llama
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Rapid City, South Dakota
Posts: 2,885
Liked 65 Times on 27 Posts

Default

Hey, the only reason to feel like an idiot in that situation would be if you stuck your face in that burner to see what was going on when you lit it. Assuming you still have your eyebrows, I would chalk that one up as a win.

__________________
Quote:
Originally Posted by Catt22 View Post
I would never use a dead mouse in my beer. It's much better to use live ones. You could probably just steep a dead one, but live ones must be mashed. Actually, smashed and mashed would be best.
llazy_llama is offline
 
Reply With Quote Quick reply to this message
Old 01-26-2010, 12:33 AM   #3
ChrisKennedy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2007
Location: Pittsburg, California
Posts: 385
Liked 11 Times on 10 Posts

Default

Yes, the built in safety features on many propane tanks can screw with you. To reset them, you often have to take off the regulator from the valve and put it back on. You can sometimes tell by resistance in the valve whether or not you are opening them too fast or if the regulator is open when you open them. If you are doing it too fast, then there is much less resistance as you open the valve.

__________________
ChrisKennedy is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Idiot Buffman All Grain & Partial Mash Brewing 4 07-16-2009 09:45 PM
Gawd I feel like an idiot... FB = Hop adjustment JoeMama Beginners Beer Brewing Forum 4 01-22-2009 02:37 PM
I feel so bad for my wife, I feel like I should have been there... The Pol General Chit Chat 36 08-14-2008 03:55 PM
Idiot-how do I fix this? brmdavis Extract Brewing 11 01-15-2007 07:41 PM