Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Equipment/Sanitation (http://www.homebrewtalk.com/f11/)
-   -   Soda Siphon Seltzer Bottle (http://www.homebrewtalk.com/f11/soda-siphon-seltzer-bottle-171564/)

bdennis 04-03-2010 12:36 PM

Soda Siphon Seltzer Bottle
So my brother gave me a Seltzer bottle that he thought I could use for homebrewing. The problem is I have no idea what to do with it. I've searched this site and cant find anyone that has used it for anything. Do you guys have any ideas? Is there a way to pressurize this thing with my co2 system?


BrewBeemer 04-03-2010 03:12 PM

I have 5 of the old type soda collectors items plus one manufactured in the late 70's from Salvation Army $3.00.
Took the 70's one with a used Co2 cartridge then drilled and soldered a brass valve stem to the side of it. The cartridge cover has open slots on the sides allowing the stem to stick thru to recharge. I use a 20# Co2 bottle at the mountain bike park for flat tire repairs and fills so the regulator and tire inflator are already available. This was a joke project as it creates too much foam with bier unless it's a in your face as a joke thing.

bdennis 04-03-2010 03:53 PM

I wonder if there is a way to attach a keg post to the bottle to pressurize it with a few psi.

BrewBeemer 04-03-2010 04:06 PM

From looking at your bottle I would solder a 1/8" brass close nipple to a spent cartridge in the end, add a hole in the cartridge retaining cap for the nipple to stick thru. Add a corney gas in fitting to this nipple then to your regulated C02 system. The problem I see is the 1/8" NPT vs your ball lock thread. There's a will there's a way.

All times are GMT. The time now is 10:27 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.