Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Single Tier System Hose/Tubing
Reply
 
LinkBack Thread Tools
Old 03-26-2012, 03:16 PM   #1
nepats52
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: MA
Posts: 20
Default Single Tier System Hose/Tubing

Hi all. I am in the process of getting a parts list together for my single tier (Brutus 10) clone. I plan on running two pumps (Chugger), ball valves connected to the out side of the pump, QD's, and 3/4" silicone tubing. Can anyone tell me how this all connects together? I have been reading lots of threads here. The more I read, the more I confuse myself. Can you post pics of your setup? Part numbers. Thanks.

__________________
nepats52 is offline
 
Reply With Quote Quick reply to this message
Old 03-27-2012, 12:38 AM   #2
itsme6582
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Cleveland
Posts: 813
Liked 22 Times on 20 Posts
Likes Given: 23

Default

This is a really open ended question. Relax. Grab a pencil and paper and start drawing it out. You don't need to be seasoned draftsman. Just draw something you can look at and understand. Sit on it for a day and draw it again. I guarantee you'll change it. Do this until you really feel like you've got a good plan. Price it out and revise again.

You need to think about how you are going to get wort from your kettles to your pumps. Are you going to make some sort of manifold or just connect hoses directly to where they need to go.

How many hoses will you need? With 2 pumps, you may need as many as 6 hoses. Draw up how you will connect everything during your brew day for each step. Preheat, mash, recirc, lauter, sparge, chill, cleanup.

When you're ready to order... revise again.

I nearly pulled the trigger one day but decided to wait one more week to think it over. Then I came up with this idea that totally changed my gameplan:

I thought I was set on HERMS with 2 pumps. I really balked at how expensive cam locks were going to be. Then I realized I could go with only 1 pump and get the cam locks. That decision saved me enough money that I could install thermometers instead of measuring temps by hand. That was probably after a dozen previous revisions.

I'm am definitely not suggesting you should change the setup you have in mind. I'm saying think the whole thing through. Then start from scratch and think it through again.

Don't be afraid to contact the vendors you might be buying from. They have sold a lot of this equipment and can provide lots of help.

You might be better off to make several small orders than one big order. It's a lot cheaper to pay an extra 10 or 20 bucks in shipping than order a bunch of parts that don't work out quite like you thought they would.

Oh yeah. Don't forget to revise it again.

__________________
itsme6582 is offline
 
Reply With Quote Quick reply to this message
Old 03-27-2012, 01:47 AM   #3
Budzu
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: Chattanooga, TN
Posts: 793
Liked 16 Times on 15 Posts

Default

3/4" hose? Going that way with all ports and valves too? Not sure that it would help you much over some 1/2" ID hose. The size pump you're talking is sized for 1/2". Maybe there's a bigger model?

Here's how I set up my hoses and connects for this herms setup. They are camlock connectors. Elbows and kettle arrangement help shorten hoses which cuts down on temp loss.


__________________
Countertop Brutus Budzu-style
Budzu is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Yet Another Single-Tier System Build Copperpots_Brewing Equipment/Sanitation 9 04-16-2012 12:55 AM
Single tier non-HERMS system McCuckerson Equipment/Sanitation 3 12-01-2009 03:21 PM
Steel Tubing for single tier stands... Anthony_Lopez Equipment/Sanitation 12 11-20-2008 07:16 PM
Gas beam for single tier Brew system... dWiGhT-TX Equipment/Sanitation 1 09-20-2008 08:32 PM
NEW single tier, sort of, system!!! SEE IT HERE! The Pol Equipment/Sanitation 13 02-02-2008 03:04 PM