Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Sanke Fermenter Conversion
Reply
 
LinkBack Thread Tools
Old 01-28-2010, 11:23 PM   #131
fartingdog
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Oakland, CA
Posts: 106
Default

Quote:
Originally Posted by thesanch View Post
I'm thinking of going with this setup, but I'm having some difficulty thinking up a simple way of attaching my gas line to the blow off port to push the beer out when racking. I would really like to keep my gas lines they way they are (ball lock quick disconnects attached on the end).

I have the 2 keg basic kit from kegconnection. They use some sort of worm clamps that prevent them from being loosened.

Any ideas are welcome.

I see you have flare fittings for the gas QD's- all you need is a male flare fitting w/ a barbed end (about $2-3 at the LHBS), a small nylon flare washer, a length of tubing that fits over the post on Derrin's rig, and a couple small worm-drive hose clamps- 1 for the barb and one for clamping onto the blowoff post. That's what I've used.

A basic hose clamp will hold fine for the transfer- I use 3-5 psi and sometimes run a filter inline. it works great. I'd also recommend getting a hose and beer QD for the racking arm for a totally closed transfer system. I recently came into quite a bit of 1/4" silicone tubing, and don't even use the hose clamps anymore.

Did I mention I LOVE this thing?
__________________

Being drunk is the best feeling in my poor world. - Drinky Crow

fartingdog is offline
 
Reply With Quote Quick reply to this message
Old 01-29-2010, 02:10 AM   #132
thesanch
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Tucson
Posts: 294
Liked 4 Times on 3 Posts

Default

Quote:
Originally Posted by fartingdog View Post
I see you have flare fittings for the gas QD's- all you need is a male flare fitting w/ a barbed end (about $2-3 at the LHBS), a small nylon flare washer, a length of tubing that fits over the post on Derrin's rig, and a couple small worm-drive hose clamps- 1 for the barb and one for clamping onto the blowoff post. That's what I've used.
Did I mention I LOVE this thing?
Mind posting a picture?
__________________
thesanch is offline
 
Reply With Quote Quick reply to this message
Old 01-29-2010, 09:31 PM   #133
fartingdog
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Oakland, CA
Posts: 106
Default

Quote:
Originally Posted by thesanch View Post
Mind posting a picture?
Apparently I can't post attachments. Sorry.
__________________

Being drunk is the best feeling in my poor world. - Drinky Crow

fartingdog is offline
 
Reply With Quote Quick reply to this message
Old 02-01-2010, 04:44 PM   #134
TwoHeadsBrewing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2008
Location: Chico, CA
Posts: 3,930
Liked 28 Times on 25 Posts
Likes Given: 2

Default

Has anyone experimented with no-chill brewing on this setup? My two fittings are on the way, and was thinking about doing a no-chill batch to test it out.

__________________

Fermenting: ESB
Kegged: Extra IPA, Brown Ale, American Wheat, Blackheart Stout
Coming Up: Dunkleweizen, 3C Pale Ale


DIY Fermentation Chamber
More Brew Stuff
TwoHeadsBrewing is offline
 
Reply With Quote Quick reply to this message
Old 02-20-2010, 07:55 AM   #135
bhatchable
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: San Diego
Posts: 406
Liked 1 Times on 1 Posts

Default

Just ordered mine. I can't wait to test drive it

__________________
Nunc Est Bibendum
bhatchable is offline
 
Reply With Quote Quick reply to this message
Old 02-24-2010, 09:55 PM   #136
Cyan
Registered User
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2009
Location: The Kingdom of Doma
Posts: 206
Liked 2 Times on 1 Posts
Likes Given: 3

Default

Not as good as conical. What do y'all think?

__________________
Cyan is offline
 
Reply With Quote Quick reply to this message
Old 02-24-2010, 10:05 PM   #137
Irrenarzt
HNIC
HBT_LIFETIMESUPPORTER.png
Feedback Score: 2 reviews
 
Irrenarzt's Avatar
Recipes 
 
Join Date: Aug 2009
Location: Half a mile from Tucson
Posts: 1,899
Liked 155 Times on 113 Posts
Likes Given: 91

Default

Although you think of me as a sad and pathetic misogynistic wife beating degenerate from your SWMBO thread, I have to agree with you. I prefer my conical over the keg but it's definitely a cheaper solution and still works well once you get it dialed in.

__________________
On Tap: Belgian Pale Ale, Session Porter, American Brown Ale, Rum Barrel-Aged Wee Heavy, Beer Camp #118 Grandma's Closet

On Deck: Oud Bruin, Blue Corn Saison, Weizenbock, Berliner Weisse, Pomegranate Cider

Last edited by Irrenarzt; 02-24-2010 at 10:07 PM.
Irrenarzt is offline
 
Reply With Quote Quick reply to this message
Old 03-03-2010, 11:46 PM   #138
nebben
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Now legal in Utah
Posts: 1,188
Liked 11 Times on 11 Posts
Likes Given: 10

Default

Does anyone here have any experience using one of these with a guinness keg?

__________________
nebben is offline
 
Reply With Quote Quick reply to this message
Old 03-11-2010, 06:17 PM   #139
DiNap44
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Peabody, MA
Posts: 50
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by lamarguy View Post
You can connect the gas line using a 1/4" male flare fitting and 3/8" push-connect tube adapter (1/2" for the newer design). Just unhook and attach the existing MFL connector from your gas line.

If it helps, here is a parts diagram (click to enlarge) for my liquid/gas setup:

Attachment 14471
lamarguy,

Great setup. What retailer(s) did you purchase the parts from?
__________________
DiNap44 is offline
 
Reply With Quote Quick reply to this message
Old 03-14-2010, 09:41 PM   #140
bhatchable
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2009
Location: San Diego
Posts: 406
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by nebben View Post
Does anyone here have any experience using one of these with a guinness keg?
I used mine with my european sanke. it has the threaded inner neck, but was fine. the spear however did no want to come out.

now my question. I'm going to test drive this bad boy (and my new tun!) with a baltic porter tonight. with this nifty contraption came three gaskets, one is obvious. the other two I'm assuming are for the racking cane fitting. beyond that I have no idea about the placement of those two little guys. any help?
__________________
Nunc Est Bibendum
bhatchable is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sanke keg conversion to fermenter??? sleepystevenson Equipment/Sanitation 26 10-08-2011 03:27 PM
1/6th sanke as fermenter kcinpdx Equipment/Sanitation 3 09-23-2009 08:08 PM
15.5 gallon Sanke conversion to fermenter keelanfish DIY Projects 18 07-24-2009 05:25 PM
Sanke keg as apfelwein fermenter? jmp138 DIY Projects 8 04-08-2009 12:24 AM
Sanke keg as a 10 gallon fermenter?? givemaboot DIY Projects 4 02-02-2009 08:47 PM