Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Equipment/Sanitation (http://www.homebrewtalk.com/f11/)
-   -   Replacing 2.5" Draft Tower with a 3" (http://www.homebrewtalk.com/f11/replacing-2-5-draft-tower-3-a-328784/)

Thehopguy 05-15-2012 04:01 PM

Replacing 2.5" Draft Tower with a 3"
 
Is it possible to replace my Single Tap 2.5" Draft Tower with a 2 Tap 3" Draft Tower?

Got a kegerator recently and the tower is a 2.5" and the flange is 3.5"

Could I get the 3" Tower with a 4.5" Flange and just drill new mounting holes? The Towers diameter will be about a 1/2" bigger than the hole in the top of the kegerator but that shouldn't be a problem right??

Hammy71 05-15-2012 07:13 PM

I did that with my Kenmore keggerator. It was easy for me because the top is actually wood, so there was no fear of hitting any refrigerant lines while drilling the new mounting holes.

Thehopguy 05-15-2012 07:21 PM

Ya the top of mine is wood also. Well if it worked for you I hope it'll work for me, so I think I'll go for it. Thanks

BirdmanBrewingCo 05-15-2012 07:22 PM

Should work. Measure twice, drill once. :)

SavoryChef 05-16-2012 01:50 AM

Yup, worked for me

brobeman 05-16-2012 03:41 AM

Worked for me too.

Thehopguy 05-16-2012 07:57 PM

Cool, well im gonna give it a shot.

Birdman I ordered from you, two tap tower with perlicks upgrade and a keg. Can't wait!

BirdmanBrewingCo 05-17-2012 04:27 PM

Quote:

Originally Posted by Thehopguy (Post 4091834)
Cool, well im gonna give it a shot.

Birdman I ordered from you, two tap tower with perlicks upgrade and a keg. Can't wait!

Thanks hopguy! It's on its way to you!

Thehopguy 05-18-2012 03:15 AM

Quote:

Originally Posted by BirdmanBrewingCo (Post 4094254)
Thanks hopguy! It's on its way to you!

:mug:

Shipped a few hours after I ordered, you the man, Birdman! :rockin:


All times are GMT. The time now is 04:34 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.