indianaroller

Recipes 

So my brand new 20psi propane regulator does not work. When I fire up the burner with it I get a couple seconds worth or a large flame then it dies down to what would be its lowest setting. My 10psi reg works, does anyone have any tips on getting it to work or is it toast. I am using thies one Propane Regulator Kits, Stainless Steel 20 PSI Propane Regulator Kit

samc

Recipes 

It's possible that it is more sensitive to the safety valve in the tank. Are you turning the tank valve on slowly while the regulator valve is in the off position so it does not get fooled into thinking it's leaking? If you are then maybe it is defective as I can't think of what else could be wrong, it's a pretty simple device.

Marko73

Recipes 

+1 to SAMC. I had the same issue where a safety feature would constantly kick in. Make sure you open the valve very slowly and open the air damn slowly as well. This will ensure a good flame and not the typicalbig flameout at the beginning. I struggled with this with my camp chef and once I got the process down, I haven't had a problem. Keep us posted!

__________________
"It is sheer folly to be taken by the hand and led down the path of better brewing by someone who says that they know it all. No, it is your experience that counts most. It is your experience that will always lead you to more questions."

~Charlie Papazian

indianaroller

Recipes 

Thank you, it works now!