Spike Brewing 12.5 Conical Fermenter Giveaway!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > PBW Sitting In Beer Line Too Long?

Reply
 
LinkBack Thread Tools
Old 06-03-2012, 11:11 PM   #1
TMannion87
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Chicago, IL
Posts: 81
Liked 1 Times on 1 Posts

Default PBW Sitting In Beer Line Too Long?

I was cleaning out my kegs/kegerator this past weekend and flushed my lines with a PBW solution from my corny. About a week or more later I came back to notice some of the PBW solution still sitting in probably half the line. I cleared the line out and rinsed it with water, but it still has a somewhat strong scent to it. I know most of you will probably say to just replace the line, but is there any way to rinse it free of the PBW scent? Or will this not effect the taste of my next brew? Any info would be greatly appreciated. Thanks!

Tim

__________________
TMannion87 is offline
 
Reply With Quote Quick reply to this message
Old 06-04-2012, 12:47 AM   #2
Schnitzengiggle
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Tucson, AZ
Posts: 2,664
Liked 29 Times on 22 Posts
Likes Given: 16

Default

Personally, when I clean my lines, I flush with cleaner (homemade PBW) with super hot water, I actually boil it, and flush while it is uber hot, hot enough to pasteurize with cleaner (180°f). Then I rinse with cold RO water very well. If I need to store an untapped line, I will use RO or distilled water with Starsan mixed properly and then I charge the line accordingly. when I tap the line I run it until the beer flows. Usually there is some yeast initially, so I allow a few ounces of the beer/yeast to flow to ensure there is no Starsan left in the line.

This procedure has worked great.

FWIW, do not store cleaner in the lines, either, either sanitizer, or plain distilled water after a thorough cleansing.

Cheers!

__________________
follow me @ Broken Glass Brewery

Okham's Razor - simplest explanation is usually the correct one.

My DIY Kegerator - My DIY Fermentation Chamber - My DIY Portable Pump Box
Schnitzengiggle is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
does anyone know if these take 1/4'' or 3/16'' beer line? flyfisherwes Equipment/Sanitation 4 05-19-2012 01:34 AM
best beer line jfree Equipment/Sanitation 12 08-04-2011 05:58 AM
Beer line thickness? jpm5171988 Equipment/Sanitation 1 03-07-2011 07:17 AM
SS Beer Line Loweface Equipment/Sanitation 4 04-26-2009 04:40 PM
co2 and beer line QD's juvinious Equipment/Sanitation 8 08-07-2008 02:05 PM