Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > O - rings from McMaster
Reply
 
LinkBack Thread Tools
Old 12-30-2009, 11:57 PM   #1
Southside
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Indianapolis
Posts: 35
Default O - rings from McMaster

I have the part number for all my kegging O-Rings and already have them. However I was trying to get replacement o-rings for my weldless fitting in my keggle.

Does anyone know if these would be it?

McMaster part nuumber is 9396K32

Thx for any input.

__________________
Southside is offline
 
Reply With Quote Quick reply to this message
Old 12-31-2009, 01:03 AM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,015
Liked 978 Times on 653 Posts
Likes Given: 28

Default

You probably want a #209 if you stick with 1/8" profile. 1/2" thread is closer to 3/4" and you always want to undersize the oring a bit. If you step up to 3/16", you'd go #313.

Another great option is 99604A129
Silicone Sealing Washer 3/4" Screw Size, 1-1/2" OD, .093" Thick
In stock at $8.96 per Pack

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 01-20-2010, 12:44 AM   #3
jtd_1
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2008
Posts: 66
Default

I just got these in the mail today, Thanks for the PN's!

Joe

__________________
jtd_1 is offline
 
Reply With Quote Quick reply to this message
Old 01-20-2010, 05:01 AM   #4
southpawbrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Cen Coast Cali
Posts: 140
Liked 2 Times on 2 Posts

Default

Quote:
Originally Posted by Southside View Post
I have the part number for all my kegging O-Rings and already have them. However I was trying to get replacement o-rings for my weldless fitting in my keggle.

Does anyone know if these would be it?

McMaster part nuumber is 9396K32

Thx for any input.
I'm about to come into 9-10 pinlock kegs that will need to be refurbished. Would love those McMaster part #'s that you use for your kegging O-rings. Leads on what people have found as the cheapest source for pinlock rebuild kits would also be great.
__________________
Greg
SouthPaw Brewing Co.

"Stay with the beer. Beer is continuous blood. A continuous lover." — Bukowski
southpawbrew is offline
 
Reply With Quote Quick reply to this message
Old 01-20-2010, 12:50 PM   #5
Boerderij_Kabouter
Feedback Score: 0 reviews
 
Boerderij_Kabouter's Avatar
Recipes 
 
Join Date: Dec 2007
Location: Oconomowoc, Wisconsin
Posts: 8,461
Liked 119 Times on 103 Posts
Likes Given: 11

Default

http://www.homebrewtalk.com/wiki/index.php/O-ring
Boerderij_Kabouter is offline
 
Reply With Quote Quick reply to this message
Old 01-20-2010, 05:41 PM   #6
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,015
Liked 978 Times on 653 Posts
Likes Given: 28

Default

Do yourself a favor and get silicone rings for the lid #417 and posts #111. They're not that much more money but they are much nicer than the buna for staying soft in the cold.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is offline
 
Reply With Quote Quick reply to this message
Old 01-20-2010, 06:15 PM   #7
zimman
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: St. Louis, MO
Posts: 184
Liked 1 Times on 1 Posts

Default

just ordered some. great service. next day delivery. sweet.

__________________

"Fermentation may have been a greater discovery than fire."

David Rains Wallace


Primary:
Secondary:
Kegged:
Bottled:
Kegged Soda:

zimman is offline
 
Reply With Quote Quick reply to this message
Old 01-20-2010, 06:33 PM   #8
southpawbrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Cen Coast Cali
Posts: 140
Liked 2 Times on 2 Posts

Default

Thanks for the reference to the wiki post and the push to silicon. I was just sitting here trying to decide and you're right not that much more $. One O-ring I can't find listed anywhere is on some of my lids the pressure release pull tab in the center. The removable screw type looks like this one: valve . I called midwest supplies and the list that the o-rings are replaceable but they don't sell the o-ring by itself.

__________________
Greg
SouthPaw Brewing Co.

"Stay with the beer. Beer is continuous blood. A continuous lover." — Bukowski
southpawbrew is offline
 
Reply With Quote Quick reply to this message
Old 01-20-2010, 08:48 PM   #9
Southside
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2009
Location: Indianapolis
Posts: 35
Default

Yeah I bought silicone for post rings, but got buna for keg lids and will get silicone the next time... I have had a couple start to leak after a few days in the fridge. I had to add some keg lube and seal with high pressure for a sec and then back it back down.

__________________
Southside is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
McMaster Carr help wildwest450 Equipment/Sanitation 10 11-08-2009 05:08 PM
McMaster-Carr FTW. flyangler18 DIY Projects 31 02-27-2009 05:03 PM
About to order from mcmaster.... TXCrash Equipment/Sanitation 5 02-08-2009 05:43 PM
McMaster-Carr Rocks! mozicodo All Grain & Partial Mash Brewing 11 05-19-2007 04:03 AM
McMaster.com KUDOS Bobby_M Equipment/Sanitation 11 11-13-2006 11:19 PM