The Great Bottle Opener Giveaway

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > My new mash tun

Reply
 
LinkBack Thread Tools
Old 09-19-2011, 08:14 PM   #31
ben the brewman
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2008
Location: Memphis, TN
Posts: 429
Liked 13 Times on 12 Posts
Likes Given: 2

Default

Quote:
Originally Posted by kincade View Post
Thanks for the advice ben. My pot arrived on Friday so I will be doing this shortly.
Wow sweet somebody else is going to give it a shot. Let me know how it works out for you. Is your cooler cracked or still in good shape? If its not cracked you may have to split it with a razor blade to get it to pull out easier. The liner comes out fairly easy but takes a little musscle to pull it of of the cooler. Definatly keep me posted on how it goes for you. If your gonna go with a weldless fitting I recomend putting the pot in the cooler first and then drilling your hole so it lines up perfect with the orginal. Also only cut the hanles off just above the rivits. I left the rivits in with the small pieces of the handles to avoid more welding costs.
__________________
ben the brewman is offline
 
Reply With Quote Quick reply to this message
Old 09-19-2011, 08:17 PM   #32
kincade
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Utah
Posts: 374
Liked 5 Times on 5 Posts
Likes Given: 2

Default

I had been looking for some time for this, and even posted a thread!

http://www.homebrewtalk.com/f51/lini...inless-264317/

Thanks for taking the initiative, and thanks for the advice. Will post when I finish. FWIW, my cooler isn't cracked yet but is warping badly. Fitting will be marked and then welded in by a friend.

__________________

-kincade

kincade is offline
 
Reply With Quote Quick reply to this message
Old 09-19-2011, 08:27 PM   #33
WortMonger
United States Mashtronaut
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
WortMonger's Avatar
Recipes 
 
Join Date: Nov 2006
Location: Edmond, OK, Oklahoma
Posts: 3,125
Liked 26 Times on 25 Posts
Likes Given: 3

Default

I use this same idea, only on a larger scale... and without the cooler.


Works great! Stainless is hard to beat when it is time to clean.

__________________
"Beer... Nutritious and Delicious!"

"It's like a 15.5 gallon Mr. Beer!"
WortMonger is offline
 
Reply With Quote Quick reply to this message
Old 09-20-2011, 01:16 AM   #34
LuiInIdaho
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
LuiInIdaho's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Ponderay, Idaho
Posts: 434
Liked 27 Times on 22 Posts
Likes Given: 23

Default

WortMonger,
I like what you did -- that is really nice. Can you provide details on what the material is and how you accomplished this?
Thanks!

__________________
LuiInIdaho is offline
 
Reply With Quote Quick reply to this message
Old 09-20-2011, 03:22 AM   #35
ben the brewman
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2008
Location: Memphis, TN
Posts: 429
Liked 13 Times on 12 Posts
Likes Given: 2

Default

Quote:
Originally Posted by kincade View Post
I had been looking for some time for this, and even posted a thread!

http://www.homebrewtalk.com/f51/lini...inless-264317/

Thanks for taking the initiative, and thanks for the advice. Will post when I finish. FWIW, my cooler isn't cracked yet but is warping badly. Fitting will be marked and then welded in by a friend.
Be sure to weld the fitting in most of the way so it will go in the cooler with out sticking out.
__________________
ben the brewman is offline
 
Reply With Quote Quick reply to this message
Old 09-20-2011, 03:26 AM   #36
ben the brewman
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2008
Location: Memphis, TN
Posts: 429
Liked 13 Times on 12 Posts
Likes Given: 2

Default

Here are the pics of my sparge assembly that I built. The pieces are all copper and the tri clamp fittings are stainless. I used a wort aerating spray tip as a diffuser for the water which works great. The first pic of the water running through it is on low and the second is on high flow.





__________________
ben the brewman is offline
 
Reply With Quote Quick reply to this message
Old 09-24-2011, 03:27 AM   #37
ben the brewman
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2008
Location: Memphis, TN
Posts: 429
Liked 13 Times on 12 Posts
Likes Given: 2

Default

Quote:
Originally Posted by kincade View Post
I had been looking for some time for this, and even posted a thread!

http://www.homebrewtalk.com/f51/lini...inless-264317/

Thanks for taking the initiative, and thanks for the advice. Will post when I finish. FWIW, my cooler isn't cracked yet but is warping badly. Fitting will be marked and then welded in by a friend.
Hows the progress coming on the mash tun?
__________________
ben the brewman is offline
 
Reply With Quote Quick reply to this message
Old 09-24-2011, 08:01 PM   #38
WortMonger
United States Mashtronaut
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
WortMonger's Avatar
Recipes 
 
Join Date: Nov 2006
Location: Edmond, OK, Oklahoma
Posts: 3,125
Liked 26 Times on 25 Posts
Likes Given: 3

Default

Quote:
Originally Posted by LuiInIdaho View Post
WortMonger,
I like what you did -- that is really nice. Can you provide details on what the material is and how you accomplished this?
Thanks!
Here you go! Very fun project to do. This was mainly on the HLT, but the mash tun was just more simple a fabrication seeing as I didn't have to install a ETC or anything but insulation and shooting it with truck bed liner.
__________________
"Beer... Nutritious and Delicious!"

"It's like a 15.5 gallon Mr. Beer!"
WortMonger is offline
 
Reply With Quote Quick reply to this message
Old 09-24-2011, 08:02 PM   #39
WortMonger
United States Mashtronaut
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
WortMonger's Avatar
Recipes 
 
Join Date: Nov 2006
Location: Edmond, OK, Oklahoma
Posts: 3,125
Liked 26 Times on 25 Posts
Likes Given: 3

Default

Ben, excellent fabrication! Great idea and i hope it works very well for you.

__________________
"Beer... Nutritious and Delicious!"

"It's like a 15.5 gallon Mr. Beer!"
WortMonger is offline
 
Reply With Quote Quick reply to this message
Old 09-25-2011, 03:04 AM   #40
ben the brewman
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2008
Location: Memphis, TN
Posts: 429
Liked 13 Times on 12 Posts
Likes Given: 2

Default

Quote:
Originally Posted by WortMonger View Post
Ben, excellent fabrication! Great idea and i hope it works very well for you.
Thanks man! Im gonna try it out tomorrow and I will let you guys know how it works out.
__________________
ben the brewman is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Maintaining Mash Temps in Stainless Steel (Keggle) Mash Tun Jewrican Equipment/Sanitation 14 05-01-2014 07:11 PM
Stout Tanks Mash Tun vs Blichmann Mash Tun (w/ false bottom) julian81 Equipment/Sanitation 38 03-27-2014 12:35 AM
Stout tanks mash tun - vs. Sabco mash tun Shansta Equipment/Sanitation 0 09-01-2011 04:25 PM
1/2" tubing / Camlocks on Mash Tun = Stuck Mash?? snoworshine Equipment/Sanitation 5 10-05-2010 05:15 PM
How much mash can a mash tun mash? Need Help for Tomorrow's Brew! ryan_pants Equipment/Sanitation 3 02-11-2007 01:44 AM